Installing a toilet might seem like a daunting task, but with the right steps and a bit of patience, you can successfully complete this plumbing project. This guide will walk you through the process, from gathering tools to ensuring a secure and watertight connection.
Tools and Materials Needed
Before you begin, ensure you have all the necessary tools and materials. You'll need:
- New toilet
- Wax ring
- Bolts and nuts
- Crescent wrench
- Adjustable wrench
- Screwdriver (if your toilet has plastic bolts)
- Hammer
- Chalk line
- Tape measure
- Plunger
- Bucket
Preparation
Before you start, turn off the water supply to the toilet and flush to empty the tank. Place a bucket underneath the water supply line to catch any remaining water. Disconnect the water supply line and remove the old toilet.

Measuring and Marking
Use a chalk line and tape measure to mark the location of the new toilet. The center of the bolt caps should be 12 inches apart, and the toilet should be centered over the drain.
Installing the Wax Ring
The wax ring creates a watertight seal between the toilet and the drain. Place the wax ring over the drain, ensuring the flat side faces up. If your toilet has a plastic bolt cap, place it on the bottom of the toilet now.
Positioning the Toilet
Carefully position the toilet over the wax ring, ensuring it's centered and the bolt holes align with your marks. Gently lower the toilet onto the wax ring, pressing down firmly but not so hard that you damage the ring.

Securing the Toilet
Insert the bolts through the bolt holes in the toilet base and into the floor. Use an adjustable wrench to tighten the nuts onto the bolts, but be careful not to overtighten. Tighten the bolts evenly, alternating between them to ensure they're even.
Once the bolts are secure, replace the water supply line and turn the water back on. Check for leaks around the base of the toilet and the water supply line. If there are no leaks, your toilet is now installed and ready to use.
Testing the Toilet
Flush the toilet a few times to ensure it's working properly. If the toilet is rocking or wobbling, you may need to tighten the bolts further or use a shim to level the toilet. If you notice any leaks, you may need to replace the wax ring.
Congratulations, you've successfully installed a new toilet! Regular maintenance, such as cleaning the toilet and checking for leaks, will help ensure your toilet continues to function properly.