Finding cracked or foggy glass in your basement windows is a common problem for many homeowners. Old basement windows often suffer from moisture, temperature fluctuations, and accidental damage, leading to a loss of insulation and an unattractive appearance. Replacing the glass yourself is not only a cost-effective solution but also a rewarding project that can significantly improve your basement's light and energy efficiency. This guide walks you through the entire process, from safety precautions to final installation, ensuring you can tackle this task with confidence.

Safety First: Preparing for the Job

Before removing the old glass, prioritizing safety is non-negotiable. Basement windows can be large, heavy, and positioned in awkward spots, making the risk of cuts or falls a real concern. You will be handling sharp edges and potentially unstable ladders, so preparation is key to avoiding emergency room visits.
To create a safe workspace, follow these critical steps:

- Wear heavy-duty work gloves and safety goggles to protect against shards.
- Use a sturdy ladder that is properly secured and rated for your weight.
- Clear the area around the window of any obstacles or trip hazards.
- Have a partner assist you, especially when lifting the window frame or holding the glass.
Assessing Your Window and Measuring Correctly

Not all basement windows are created equal, and jumping straight to the hardware store without measurements is a sure way to waste time and money. You need to determine whether your window uses a single pane of glass or an insulated glass unit (IGU), which consists of two panes sealed together. IGUs are common in modern installations and provide better insulation, but they are replaced as a sealed unit rather than individual panes.
To measure accurately:
- Remove the interior trim to expose the window frame.
- Measure both the height and width of the window frame from edge to edge at the top, middle, and bottom.
- Record the smallest of these three measurements for both height and width. This ensures the new glass will fit snugly with room for putty or caulk.

Removing the Old Glass Pane
Once the area is prepared and measured, you can begin the removal process. The goal is to take out the old glass without shattering it further or damaging the surrounding frame. Patience is essential here; rushing this step can turn a simple repair into a difficult reconstruction.
Follow these steps to extract the old glass:

- Lay down a thick drop cloth or tarp beneath the window to catch any debris.
- Use a razor blade or putty knife to scrape away the old glazing compound or caulk from the edges of the glass.
- Gently heat the glazing putty around the perimeter with a heat gun to soften the adhesive.
- Place a thick blanket or cardboard against the glass and carefully remove the glazing points or clips.
- Apply steady, gentle pressure to tilt the glass out of the frame. If it resists, re-apply heat to any stubborn spots.
Choosing and Installing the New Glass













![HOW TO Replace A Basement Window. [Part ONE]](https://i.pinimg.com/originals/a3/95/50/a39550d743e948097a79d976b886ff0c.jpg)






With the old glass out of the frame, you can focus on selecting the right replacement. For basement applications, you generally want a material that provides insulation and reduces moisture transfer. While standard clear glass is the cheapest option, tempered glass is highly recommended for safety. If the window is large or prone to breakage, consider double-pane glass to prevent heat loss and reduce future fogging.
Installing the new pane requires precision to ensure a proper seal:
- Carefully place the new glass into the frame, ensuring it sits evenly on the glazing points.
- Use wooden shims to hold the glass securely in place if necessary, but do not put pressure directly on the glass.
- Apply a continuous bead of glazing putty around the entire perimeter of the glass.
- Smooth the putty with a putty knife to create a tight seal that keeps moisture out.
- Allow the putty or caulk to cure for at least 24 hours before operating the window.
Finishing Touches and Long-Term Maintenance
After the new glass is set and the sealant has cured, the project is nearly complete. The final step involves cleaning up the installation area and ensuring the window operates smoothly. A proper finish not only looks professional but also protects the new glass from future damage caused by moisture and dirt buildup.
To finalize the job:
- Clean the glass using a standard glass cleaner or a vinegar solution.
- Reattach the interior trim or casing that was removed at the start.
- Inspect the seal around the edges for any gaps or air leaks.
- Test the window by opening and closing it to ensure it slides or swings freely.
- Schedule a yearly check of the caulking to maintain energy efficiency.