Polaris Fan Not Working at Angelina Pavy blog

Polaris Fan Not Working. My riding group has had fans stop working and for sure this was a common cause. Disconnect the temp sensor from the head and the fan should come on. So far, i have checked fuses, swapped the fan relay with a different relay, and also checked the fan. If the fan doesnt come on confirm it operation by jumping. Unplug your temp sensor and the fan should run as soon as the key turns on. I noticed it was running about 220 and the fan was not on. If not then hook your fan up to 12volt battery to confirm. The fuse is good, and i unhooked the temp sensor and the fan kicked on. I'm not sure where or if there is a relay for the fan on. Went riding last weekend, got about 10 minutes into the ride stopped. My fan on my 2021 xp1000 northstar is coming on. The radiator fan is not running. Cts is an input to the ecm. In most cases disconnecting the coolant temp sensor causes the cooling fan to come on. If you have power on pin 10 and pin 9 of the fan relay continuity to ground on the brown wire of the fan connector, then it's either.

If you have power on pin 10 and pin 9 of the fan relay continuity to ground on the brown wire of the fan connector, then it's either. I'm not sure where or if there is a relay for the fan on. If the fan doesnt come on confirm it operation by jumping. If not then hook your fan up to 12volt battery to confirm. My fan on my 2021 xp1000 northstar is coming on. Went riding last weekend, got about 10 minutes into the ride stopped. So far, i have checked fuses, swapped the fan relay with a different relay, and also checked the fan. I noticed it was running about 220 and the fan was not on. Cts is an input to the ecm. Unplug your temp sensor and the fan should run as soon as the key turns on.

2016 570 wiring Polaris ATV Forum

Polaris Fan Not Working Cts is an input to the ecm. Unplug your temp sensor and the fan should run as soon as the key turns on. Disconnect the temp sensor from the head and the fan should come on. Went riding last weekend, got about 10 minutes into the ride stopped. If not then hook your fan up to 12volt battery to confirm. My fan on my 2021 xp1000 northstar is coming on. The radiator fan is not running. So far, i have checked fuses, swapped the fan relay with a different relay, and also checked the fan. I noticed it was running about 220 and the fan was not on. I'm not sure where or if there is a relay for the fan on. If you have power on pin 10 and pin 9 of the fan relay continuity to ground on the brown wire of the fan connector, then it's either. In most cases disconnecting the coolant temp sensor causes the cooling fan to come on. My riding group has had fans stop working and for sure this was a common cause. Cts is an input to the ecm. The fuse is good, and i unhooked the temp sensor and the fan kicked on. If the fan doesnt come on confirm it operation by jumping.