Mastering Internal Corners: A Comprehensive Guide to Tiling like a Pro

Tiling internal corners might seem daunting, but with the right techniques and a bit of practice, you can achieve professional-looking results. This guide will walk you through the process, from understanding the tools you need to applying the final touches. Let's dive in!

Gather Your Tools and Materials
Before you start, ensure you have the following tools and materials:

- Tiling adhesive
- Thinset mortar (for larger tiles)
- Trowel (notched and straight-edged)
- Tile cutter or wet saw
- Tile nippers
- Rubber grout float
- Sponge
- Grout
- Sealer
- Safety gear (gloves, goggles, dust mask)
Preparation: Measuring and Marking

Measure the width of the corner and mark the centerline on both walls using a pencil and a level. This will help you ensure your tiles are centered and aligned.
Applying Adhesive: The Key to a Strong Bond
Mix your adhesive or thinset mortar according to the manufacturer's instructions. Using a notched trowel, apply the adhesive to the wall, ensuring you cover the marked centerline. Hold the trowel at a 45-degree angle and use the notched edge to create grooves, which will help the adhesive bond better with the tile.

Tilting Internal Corners: The Trick to a Perfect Finish
Starting at the bottom, apply adhesive to the back of your tile using the straight-edged trowel. Press the tile firmly into place, ensuring it's level and aligned with the centerline. Repeat this process, working your way up the wall, applying adhesive to both the wall and the tile's back to ensure a strong bond.
For the corner tile, you'll need to cut it to size. Using a tile cutter or wet saw, cut the tile in half lengthwise. Apply adhesive to both halves and press them into place, one on each wall, creating a perfect internal corner.

Pro Tip: Use a Tile Leveler
For a perfectly level tile, consider using a tile leveler. This tool ensures your tiles are level and aligned, making the tiling process much easier.




















Letting the Adhesive Cure: Patience is Key
Allow the adhesive to cure according to the manufacturer's instructions. This is typically 24-48 hours. Do not apply grout until the adhesive is fully cured to prevent it from cracking or coming loose.
Grouting: The Final Touch
Mix your grout according to the manufacturer's instructions. Using a rubber grout float, apply the grout diagonally to the tiles, forcing it into the joints. Work the grout into the joints using a sawing motion, ensuring they're completely filled.
Allow the grout to set for about 15 minutes, then use a damp sponge to wipe away excess grout from the tile surface. Be careful not to remove the grout from the joints. Allow the grout to set for another 15-30 minutes, then wipe the tiles again to remove any remaining haze.
Sealing: Protecting Your Tiles for Years to Come
Once the grout is completely dry (usually after 72 hours), apply a sealer to protect your tiles and grout from moisture and stains. Follow the manufacturer's instructions for application and drying times.
And there you have it! With a bit of practice and patience, you can tile internal corners like a pro. Happy tiling!