Adjusting Your Norton Door Closer: A Comprehensive Guide

Norton door closers are renowned for their durability and reliability, but like any mechanical device, they may require adjustment over time to maintain optimal performance. This guide will walk you through the process of adjusting your Norton door closer, ensuring a smooth and safe closing action.

Understanding Your Norton Door Closer
Before we dive into the adjustment process, let's familiarize ourselves with the key components of a Norton door closer. The main parts you'll interact with are:

- The arm, which is connected to the door and the closer body.
- The adjustment screw, usually located at the bottom of the closer body.
- The closing speed control, typically a dial or screw near the adjustment screw.
Preparation: Tools and Safety

Before you begin, gather the following tools:
- A flathead screwdriver (for older models) or an Allen wrench (for newer models).
- A measuring tape or ruler.
Also, ensure the door is closed and the area is well-lit for safe and accurate adjustments.

Adjusting the Latching Speed
The latching speed determines how quickly the door closes after it's released. Here's how to adjust it:
- Open the door to 90 degrees and release it. The door should close slowly and latch securely.
- If the door closes too quickly or too slowly, use the adjustment screw to fine-tune the latching speed. Turn the screw clockwise to slow down the closing speed and counterclockwise to speed it up.
- Repeat step 2 until the door closes at the desired speed.

Adjusting the Closing Speed
The closing speed determines how fast the door closes after it's released and before it latches. Here's how to adjust it:











![How to Install a Door Closer with Drop-Pin Attachment [1080p]](https://i.pinimg.com/originals/ba/f2/bf/baf2bf5d37dd0277b7619903c3329730.png)








- Open the door to 90 degrees and release it. The door should close at a steady, controlled pace before latching.
- If the door closes too quickly or too slowly, use the closing speed control (usually a dial or screw near the adjustment screw) to fine-tune the closing speed. Turn the control clockwise to slow down the closing speed and counterclockwise to speed it up.
- Repeat step 2 until the door closes at the desired speed.
Testing and Final Adjustments
After making your adjustments, test the door's closing action several times to ensure it's working correctly. If necessary, make final adjustments in small increments until the door closes smoothly and securely.
When to Call a Professional
While many door closer adjustments can be made by the homeowner, there are times when it's best to call a professional. If your door closer is leaking oil, making excessive noise, or the door is still not closing properly after adjustments, it's time to contact a certified door closer technician.