Replacing a Rear View Mirror: A Step-by-Step Guide

Driving without a functional rear view mirror can be dangerous and inconvenient. If your mirror has cracked, fallen off, or stopped adjusting, it's time to replace it. This guide will walk you through the process, ensuring you're back on the road safely and quickly.

Understanding Your Mirror Type
Before you start, identify your mirror type. There are two main types:

- Manual mirrors: These are adjusted by hand and typically have a simple, fixed design.
- Power-adjustable mirrors: These are adjusted electronically and may have additional features like heating or auto-dimming.
Knowing your mirror type will help you choose the right replacement and understand the installation process.

Gather Your Tools and Materials
Before you begin, ensure you have the following:
- A new rear view mirror, compatible with your vehicle
- Socket wrench or screwdriver (depending on your vehicle's fasteners)
- Pliers or a mirror removal tool (optional, for stubborn mirrors)
- Rubber gloves (to protect your hands from glass)
- Rag or towel (to clean the mirror base)

Removing the Old Mirror
Once you've gathered your materials, it's time to remove the old mirror. Here's a step-by-step process:
- Adjust the mirror to the center position to avoid any obstruction while working.
- Turn off your vehicle's ignition to prevent any electrical shorts.
- Remove any decorative covers or trim around the mirror base using a flathead screwdriver or your fingers.
- Using a socket wrench or screwdriver, loosen and remove the fasteners holding the mirror in place. These are usually located at the bottom of the mirror mount.
- Gently pull the mirror away from the windshield. It may be held in place by clips or adhesive, so you might need to use pliers or a mirror removal tool to pry it off.
- If the mirror is broken, wear rubber gloves to protect your hands from glass as you remove it.

Installing the New Mirror
With the old mirror removed, it's time to install the new one. Here's how:




















- Clean the mirror base and the area around it with a rag or towel to remove any dirt or debris.
- Position the new mirror against the windshield, ensuring it's centered and at the correct angle.
- Align the holes in the mirror with the corresponding holes in the mount.
- Insert the fasteners and tighten them securely using a socket wrench or screwdriver. Be careful not to overtighten and damage the mirror or the mount.
- Reattach any decorative covers or trim you removed earlier.
- Test the mirror by adjusting it to ensure it works correctly. If it's a power-adjustable mirror, turn the ignition to the 'ON' position but keep the engine off.
For Power-Adjustable Mirrors
If you're replacing a power-adjustable mirror, you'll need to reconnect the electrical wires. Here's how:
- Locate the wiring harness behind the mirror mount. It may be held in place by a clip or a plug.
- Carefully disconnect the wires from the old mirror. They should be color-coded and numbered to make reconnection easier.
- Connect the wires to the new mirror, ensuring they match the corresponding colors and numbers.
- Reattach the wiring harness to the mirror mount.
If you're unsure about any part of the process, consult your vehicle's owner's manual or seek professional help.
Safety Checks
Before you hit the road, perform a few safety checks:
- Adjust the mirror to your preferred position.
- Test the mirror's functionality, if applicable.
- Check for any loose or damaged fasteners.
- Ensure the mirror is securely attached to the windshield.
By following this guide, you should be able to replace your rear view mirror safely and confidently. Happy driving!