DIY Beam Expander: Enhance Your Laser's Reach
Are you a hobbyist, researcher, or educator looking to expand the beam diameter of your laser? A DIY beam expander can be an affordable and rewarding project that boosts your laser's power and versatility. This guide will walk you through the process, from understanding beam expanders to building your own.
Understanding Beam Expanders
Beam expanders are optical devices that increase the diameter of a laser beam while maintaining its divergence. They consist of two lenses: a negative (concave) lens and a positive (convex) lens. The negative lens diverges the beam, and the positive lens converges it back to a narrower divergence.
Benefits of a DIY Beam Expander
- Cost-effective: Building your own beam expander can save you money compared to commercial options.
- Customization: You can tailor the expander to your specific laser and application.
- Educational: The process of building a beam expander can deepen your understanding of optics.
Materials Needed
To create a DIY beam expander, you'll need the following materials:

- Two lenses (concave and convex) with the same focal length
- Lens mounts or lens tubes
- Lens spacers or a lens tube with adjustable length
- Laser (class 2 or lower for safety)
- Ruler or measuring tape
- Pencil and paper for calculations
Calculating Lens Focal Length
To determine the focal length of your lenses, you'll first need to know the desired beam diameter and the divergence of your laser. Here's a simple formula to calculate the focal length (f) of your lenses:
f = D / (4 * tan(θ))
Where D is the desired beam diameter and θ is the divergence angle of your laser.

Building Your DIY Beam Expander
- Choose your lenses based on the calculated focal length. Ensure they have the same focal length and are made of a material that can handle your laser's wavelength.
- Mount your lenses in their respective lens mounts or tubes.
- Calculate the distance between the lenses using the formula:
L = f + f(where f is the focal length of your lenses). - Use lens spacers or an adjustable lens tube to set the distance between the lenses to L.
- Align the lenses so that their optical axes are parallel.
Testing Your DIY Beam Expander
To test your DIY beam expander, shine your laser through it and measure the beam diameter using a ruler or a laser beam profiler. Adjust the distance between the lenses as needed to achieve the desired beam diameter.
Safety First
Always remember to prioritize safety when working with lasers. Wear appropriate eye protection, ensure your laser is rated class 2 or lower, and never look directly into the laser beam.























