Building a deck around an above ground pool transforms a simple backyard feature into an integrated entertainment and relaxation space. This project requires careful planning to ensure the deck surface is level, the structure is stable, and the final result complies with local building codes. The key to success lies in designing the deck height to accommodate the pool’s walls and support structure without compromising the integrity of the pool itself.
Planning and Design Considerations
Before cutting a single board, you must evaluate the site and the pool specifications. The primary decision is determining the height of the deck frame, which is usually dictated by the height of the pool wall. You will either build the deck at the same level as the top of the pool wall or create a lower deck surface that steps down to the pool. It is critical to check your local building permits, as many jurisdictions require railings for decks above a certain height or mandate specific distances from property lines. You should also measure the exact diameter of the pool and calculate the square footage to order the correct amount of lumber and fasteners.
Material Selection for Durability
Above ground pools create a humid environment, so material selection is the most critical factor for longevity. Treated lumber is a cost-effective option, but for a premium look and long-term resistance to moisture, pressure-treated wood or composite decking is recommended. For the structural framing, 2x6 or 2x8 joists are typically required to span the distance between the pool walls. You will also need concrete deck blocks or adjustable steel pedestals to support the beam structure, along with galvanized nails or screws to prevent rusting.

Step-by-Step Construction Process
Begin by clearing and leveling the area directly around the pool. Excavate any high spots to ensure the concrete blocks will sit flush with the ground. Position the concrete deck blocks in a grid pattern according to your chosen beam layout, ensuring the spacing adheres to the joist placement guidelines provided by the lumber supplier. Place the support beams on top of the blocks and adjust the pedestals until the frame is perfectly square and level.
Framing and Deck Board Installation
With the support structure in place, attach the rim joists to the top of the support beams to create a secure box frame. Lay the floor joists perpendicular to the rim joists, securing them with joist hangers for maximum strength. Once the framing is complete, you can begin installing the deck boards. Start at one side and work your way across, using spacer blocks to maintain consistent gaps between boards for drainage. Fasten the boards carefully to avoid splitting the wood, ensuring you do not obstruct the pool walls or access panels.
Safety is paramount when completing the deck around an above ground pool. If the deck height exceeds local code requirements, you must install a continuous railing system with balusters spaced close enough to prevent a child from squeezing through. The railing posts should be anchored securely to the deck frame, and the top rail should be at a comfortable height for adults. Consider adding trim boards or skirting to cover the gap between the pool wall and the deck frame, creating a clean, finished appearance.

Finishing Touches and Maintenance
After the structure is complete, apply a high-quality exterior stain or paint to protect the wood from UV damage and moisture infiltration. This finishing step significantly extends the life of the deck and enhances the aesthetic appeal of the pool area. Once the finish is dry, inspect all connections and fasteners to ensure everything is tight and secure. Regular maintenance, such as cleaning debris from the deck surface and checking for soft spots, will keep the structure safe and beautiful for years to come.