Mastering the Art of Hemming: A Step-by-Step Guide to Inside Corners
Hemming is a fundamental sewing technique that can transform the look and fit of any garment. While hemming straight edges is straightforward, hemming inside corners can be a bit tricky. This comprehensive guide will walk you through the process, ensuring a professional finish every time.
Understanding Inside Corners
Inside corners, also known as mitered corners, are found where two edges meet at a 90-degree angle, such as at the hem of a skirt or the edge of a tablecloth. Hemming these corners correctly ensures a smooth, neat finish that eliminates bulk and prevents fraying.
Preparation: Gathering Your Tools and Materials
Before you begin, ensure you have the following tools and materials on hand:

- Fabric
- Sewing machine with a universal needle (size 80/12 or 90/14)
- Thread (matching or contrasting, depending on your desired effect)
- Scissors or rotary cutter and mat
- Straight pins or fabric clips
- Iron and ironing board
- Seam gauge (optional)
Step 1: Measure and Cut
The first step in hemming an inside corner is to measure and cut the fabric to the desired length. When measuring, account for the width of the hem and the seam allowance. A typical seam allowance is 1/2 inch, but this can vary depending on the fabric and the desired finished look.
Once you've measured and marked the fabric, use scissors or a rotary cutter to cut along the line. If your fabric is prone to fraying, consider using a zigzag stitch or an overlocker to finish the raw edges before cutting.
Step 2: Fold and Press the Hem
With the right side of the fabric facing up, fold the fabric up along the cut line to create a hem. Press the fold with an iron to create a sharp crease. This will serve as a guide for sewing.

Next, fold the raw edge of the hem up towards the wrong side of the fabric, creating a double-fold hem. The width of this fold should be equal to your seam allowance. Press the fold again to create a sharp crease.
Step 3: Sew the Hem
With the right side of the fabric still facing up, use straight pins or fabric clips to secure the hem in place. Start sewing from the bottom of the hem, using a straight stitch and following the crease you've pressed into the fabric.
When you reach the corner, stop sewing. Do not turn the fabric. Instead, lift the presser foot and pivot the fabric, sewing along the crease on the other side of the corner. Continue sewing until you've sewn the entire hem.

Step 4: Press and Finish
Once you've sewn the entire hem, use an iron to press the seam open. This will help to eliminate bulk and create a smooth, professional finish.
If desired, you can topstitch the hem in place. Topstitching involves sewing a line of stitching along the edge of the hem, close to the folded edge. This can help to secure the hem in place and add a decorative touch.
Tips for a Perfect Inside Corner Hem
Here are some additional tips to help you achieve a perfect inside corner hem:
| Tip | Explanation |
|---|---|
| Use a seam gauge | A seam gauge can help you ensure that your seam allowance is consistent throughout the hem. |
| Press as you go | Pressing the fabric after each step helps to set the creases and ensures a sharp, professional finish. |
| Test your stitch length | Before sewing the entire hem, test your stitch length on a scrap piece of fabric to ensure that it's suitable for the fabric and the desired effect. |
With practice, hemming inside corners becomes second nature. This guide should help you achieve a professional finish every time. Happy sewing!






















