Ip65 Bathroom Zone 1

No IP rating is required. However, if there is a likelihood of water jets being used for cleaning purposes in zones 1, 2 and 3, a fitting rated a minimum IP65 must be used. For more information on IP ratings and bathroom zones then we would advise checking the 17th Edition Wiring Regulations by the IEE and IET.

Explanation of bathroom Lighting zones with chart and IP (Ingress Protection) ratings table. IP Ratings and Bathroom Zones explained February 22, 2017 Katie A bathroom can be a confusing place in your home to heat, with many radiators being unsuitable for installation. For zone 0, light fittings need to be at least a minimum of IP67 which means immersion proof.

Lights used in zone 0 will also need to be low voltage, with a maximum of 12V. Zone 1 This is the area of the bathroom that is directly above the bath tub and the shower, up to a height of 2.25m from the bathroom floor and at a 1.2m radius from water. Bathroom zone 1 is the area above a bath or shower to a height of 2.25m from the floor.

In this zone, lighting with a minimum rating of IP45 is required but it is generally accepted that IP65 should be used to ensure safety. Bathroom Zones - The IP Standard The Ingress Protection (IP) Standard is a rating system for categorising electrical appliances by their ability to keep out foreign bodies, such as dust particles and water. For bathroom electronics, this is most relevant in preventing water from entering the appliance and causing a potentially dangerous malfunction.

This system is now the standard in the UK. Zone 1: This is the area above the bath or shower to a height of 2.25m from the floor. Light fittings within this area must reach a minimum of IP44, however, shower lights are generally designed to IP65 and are perfect for use in Zone 1 installations.

Zone 1 is the area above the bath or shower to a height of 2.25m from the floor. In this zone a minimum rating of IP45 is required but it is generally accepted that IP65 is to be used. Enjoy our bathroom zoning guide explains the classification of zones and where to install extractor fans and IEE Wiring Regulations.

Bathroom Zone 1 Above the Bath/Shower Covers the area above the bath or shower up to 2.25m from the floor. Requires a minimum IP65 rating (protected against direct water jets). 240V fittings must be RCD-protected (30mA residual current device).

Example products: Shower ceiling lights, extractor fans.