Installing a bathroom mirror light can significantly enhance your morning routine, providing ample task lighting for grooming and shaving. It also adds a touch of elegance to your bathroom. This guide will walk you through the process of wiring a bathroom mirror light, ensuring safety and compliance with electrical codes.

Before we dive into the steps, let's ensure you have the right tools and materials. You'll need a voltage tester, wire stripper, screwdriver, electrical tape, and a junction box if your light doesn't have one. For materials, you'll need 14/3 non-metallic (NM) sheathed cable, a light fixture, and a switch.

Preparation and Planning
Before you start, turn off the power to the circuit at your home's main electrical panel. Use a voltage tester to ensure the power is off before proceeding. Next, decide on the location of your light and switch, ensuring they're at least 3 feet away from water sources to comply with electrical codes.

Measure and cut your NM cable. You'll need enough cable to reach from your power source to the switch location, from the switch to the light, and a few extra feet for maneuvering and safety. Remember, cable should be run in a straight line whenever possible to minimize voltage drop.
Running the Cable

Run the cable from your power source to the switch location. If you're using an existing cable, ensure it's in good condition and has no exposed wires. If you're running new cable, fish it through the wall using a fish tape or drill a hole if necessary.
Once the cable is in place, pull it through so there's enough slack at both ends. Strip about 2 inches of sheathing from each end of the cable, exposing the individual wires. You should see two hot wires (black and red), one neutral wire (white), and a bare copper wire (ground).
Wiring the Switch

Install the junction box (if not already part of the light fixture) where the cable meets the switch. Connect the black and red hot wires to the switch's terminals. The neutral wire (white) should be connected to the green or bare wire on the switch, which is the ground. Cap off the remaining wires with wire nuts.
Install the switch in the electrical box, ensuring it's tight and secure. Use a screwdriver to secure it in place. Now, run the cable from the switch to the light fixture, following the same process as before. Ensure there's enough slack for the light fixture to be securely mounted.
Installing the Light Fixture

Mount the light fixture to the wall, ensuring it's level and secure. If your fixture has a junction box, connect the hot wires (black and red) to the fixture's black wires, the neutral wire (white) to the white wire, and the ground wire (bare copper) to the green or bare wire. Cap off any remaining wires with wire nuts.
Secure the fixture to the wall using the provided screws or mounting hardware. Ensure it's tight and secure. If your fixture has a shade or cover, install it now.




















Testing the Circuit
Turn the power back on at your main electrical panel. Test the light switch to ensure the light turns on and off. If it doesn't, double-check your connections and ensure all wires are securely fastened. If you're still having trouble, consult a licensed electrician.
Once your light is working, use electrical tape to secure any exposed wires and ensure all connections are tight. This will help prevent future issues and ensure the safety of your bathroom mirror light.
Congratulations! You've successfully wired a bathroom mirror light. This addition will not only enhance your bathroom's functionality but also its aesthetic appeal. Always remember to prioritize safety when working with electricity. If you're unsure about any aspect of the process, don't hesitate to consult a professional electrician.