Toyota Hilux 1uz Conversion

High quality engine conversion swap kits for the Toyota 1UZFE. Unlock the full potential of your 1UZ, 2UZ, or 3UZ V8 swap with a set of precision-engineered UZ Swap Headers, designed for the tight Toyota engine bays. These are designed for 1989.

I completed a 1uz conversion into my rn90 hilux last year. awesome conversion and very happy with except for my diff ratio, 4.11's ain't good for the highway. I used the CRS mounts and sump, dellow bellhousing and ran a Microtech ecu.

Dellow Conversions kit for the Toyota Hilux uses the 1UZ 2UZ V8 to replace the factory petrol or diesel engine. The 1UZ 2UZ V8 is powerful, economical and also offers easy maintenance and peace of mind, knowing replacement parts can be found anywhere. Conversion Notes Transmission details required, usually indicated as Trans./Axle on the compliance plate; Check for G52 / G56 or the larger.

Nick's 1UZ swap into 95 2wd double cab HiluxThe ignitors, airflow meter and alternator plugs needed to be reattached to the loom, but I was lucky in that the main loom from the engine to the ecu wasn’t cut as in most imported engines. Since then I’ve had to wire up another couple of 1UZs with cut looms. They are a bit tougher and do take a while, if the colours match it’s.

Here is my build log for my 1uz swop in my 2nd gen Toyota Hilux Surf (2nd gen 4runner) This swop has been done by many before, but I thought I'd document how I've done it and hurdles I've had to overcome and pros/cons I've found from other conversions. CONTENTS 1) The story 2) The donor 3) Removing the engines 4) Engine harness 5) ECU repair 6) Firewall modification 7) Handbrake modification 8. Robs '78 Hilux 1uz conversion Discussion in ' 1976-1983 Build-Up/Project Threads ' started by Robs Rn20 1uz, Apr 18, 2013.

1UZ into RZN149 hiluxEngine conversion was done in a 2wd 1998 hilux, not sure at this stage if it suits 4wd yet or what other model hilux'sSump used was a front sump with a notch taken out of the back of the steel pan for clearance of the traction rod/steering armA rear sump looks like it would work but would require a notch out of the front of the steel pan, unconfirmed at this stage.Uses. Empty engine bay. Ready to begin engine transplant.

Now this is what I'm talking about! They should have used these in the beginning! Doesn't it look beautiful. Its a 1991 1UZ-FE from a Toyota Crown Majesta (front sump) The front sump version of these engines are the easiest to use for a Hilux (LN130) IFS conversion. Hey guys, I have been asked a few questions on the 1uz swap into my Aussie spec Hilux.

So here goes. My truck was running the 3rz prior to the swap. I have a mate who is running the 1uz in a gen2 4Runner.

After hearing this thing and taking it for a drive my mind was made up. The 1uz is a.