Installing the Krabb mirror from IKEA is a straightforward process that typically requires only a screwdriver and a few minutes of your time. This simple mounting system allows you to transform a basic mirror into a functional and stylish addition to any entryway or hallway. Following the official IKEA Krabb mirror mount instructions ensures a secure and level installation that will last for years.
Understanding the Krabb Mirror Hardware
The Krabb mirror kit comes with everything needed for a standard installation, provided you use the included mount. The primary components are the wooden mounting bracket, two screws, and two wall plugs designed for plasterboard or solid walls. It is crucial to understand that the mirror attaches directly to this bracket via a simple slot-in mechanism, rather than the bracket being hidden behind the glass. This design simplifies the installation significantly, as you do not need to align the mirror with a separate frame.
Preparing the Wall and Tools
Before beginning the installation, you must determine the ideal height and location for the mirror. Aim for a position that is easily accessible and aligns with the furniture below, such as a console table or sideboard. You will need a tape measure to find the center point, a pencil to mark the holes, a drill to create the pilot holes for the wall plugs, and a screwdriver to secure the bracket. For a perfectly straight mount, a spirit level is an essential tool to prevent the mirror from hanging at an angle.

Step-by-Step Mount Installation
Begin by holding the wooden bracket against the wall at your desired height and marking the positions of the two screw holes with a pencil. Double-check that these marks are level with your spirit level to avoid a crooked mirror. Next, drill small pilot holes at these marks, ensuring the depth matches the length of the wall plugs. Insert the wall plugs into the holes until they are flush with the wall surface, then align the bracket over the holes and secure it firmly using the provided screws.
| Step | Action | Note |
|---|---|---|
| 1 | Mark hole positions on wall | Use level for accuracy |
| 2 | Drill pilot holes and insert wall plugs | Match plug depth to screw length |
| 3 | Secure bracket to wall | Tighten screws firmly |
Attaching the Mirror to the Bracket
With the bracket securely fixed to the wall, you can now hang the mirror. The Krabb mirror is designed with a slot or hook system that allows it to slide directly onto the wooden bracket. Lift the mirror carefully and align the mounting hardware on the back of the glass with the slot on the front of the bracket. Gently nudge the mirror into place until you hear or feel it click firmly into the mount, ensuring the weight of the mirror is fully supported by the bracket.
Final Checks and Safety Tips
Once the mirror is attached, give it a gentle downward pull to confirm that it is locked securely and will not detach accidentally. Step back and inspect the installation to verify that the mirror is perfectly level and sits flush against the wall. Because the Krabb mirror is made of glass, handle it with care during installation, avoiding pressure on the reflective surface. If the mirror is particularly large or heavy, have a second person assist you to maintain balance and prevent damage.

Following these detailed steps based on the official IKEA Krabb mirror mount instructions guarantees a secure and professional-looking result. By taking the time to measure twice and drill carefully, you ensure that the mirror remains a stable and attractive feature in your home. This simple DIY project enhances both the functionality and the aesthetic of your space without the need for professional installation.























