Choosing the right size cooker hood for a 75cm hob is the single most critical decision for ensuring effective smoke, grease, and odor removal in your kitchen. The primary rule is that the extractor hood must be wider than the hob itself to capture rising steam and smoke before they disperse into the room.
Standard Sizing and The 75cm Standard
The 75-centimeter hob is the most popular size for modern European kitchens, designed to fit neatly within a standard 60 or 65cm unit base cabinet. Consequently, the industry standard for a compatible cooker hood is a width of 80cm or 90cm. While a slim 60cm hood might seem like a cost-effective way to cover the cooking area, it often fails to capture contaminants that spill over the edges of the hob, reducing its overall efficiency significantly.
Why Oversizing is Beneficial
For optimal performance, professionals generally recommend selecting a hood that is at least 15cm wider than the hob on either side. This means an 80cm hood provides a 5cm overhang, while a 90cm hood offers a substantial 7.5cm overhang on each side. This extra width acts as a safety net, catching steam and smoke that naturally rises and expands sideways before it reaches the backsplash or cabinets.

- 80cm Hoods: The minimum recommended size; suitable for moderate cooking and lower ceiling heights where plume rise is faster.
- 90cm Hoods: The ideal choice for high-performance extraction; offers superior coverage and is essential for frequent heavy cooking or large pots.
Ceiling Height and Ducting Considerations
While the width is determined by the hob, the effective ceiling height of your kitchen dictates the type of hood you can physically install. For standard 80cm or 90cm hoods, you will typically require a ceiling height of 2.5 meters or more to accommodate the unit and ensure proper airflow.
| Hob Width | Minimum Hood Width | Ideal Hood Width | Best For |
|---|---|---|---|
| 75cm | 80cm | 90cm | High-volume cooking, steam control |
If your ceiling is lower, you might need to opt for a slim 80cm plinth-mounted hood or consider a telescopic model that can be lowered temporarily. Additionally, the ducting path matters; a wider hood connected to a single straight run of ducting performs better than a narrower hood with complex bends that restrict airflow.
Performance Metrics Beyond Dimensions
Size is only one part of the equation; the motor power, measured in cubic meters per hour (m³/h), is equally important for a 75cm setup. To effectively clear a kitchen space, you generally need 40 to 50 air changes per hour. For an 80cm hood, this translates to roughly 250-300 m³/h, while a 90cm model can handle higher capacities efficiently.

Ignoring motor performance for size can lead to frustration; a large but weak hood will merely move smoke around rather than extract it. Conversely, a smaller motor in a wide hood will strain to achieve the necessary pressure to push air through the duct.
Aesthetic Integration and Practical Layout
The visual balance between your hob and extractor hood is crucial for the overall look of your kitchen. An 80cm hood centered on a 75cm hob creates a slight asymmetry that is generally pleasing to the eye, suggesting a slight overhang that feels intentional and modern.
However, if you have a specific design vision—such as aligning the edge of the hood perfectly with the edge of a waterfall quartz countertop—you might choose a 75cm or even a 60cm model. In such scenarios, you must compromise on extraction power or accept that you will need to use the hob strategically, avoiding the outer zones where capture rates drop.






















