Building a small brick retaining wall is an excellent way to add both structure and character to your landscape. Whether you are managing a sloping yard, creating a raised garden bed, or defining a specific outdoor area, this project offers a durable solution that enhances curb appeal. While it requires careful planning and attention to detail, the process is entirely manageable for a dedicated DIYer.
Planning Your Retaining Wall
The success of your project begins long before the first brick is laid. A solid plan addresses drainage, height limitations, and the specific soil conditions of your site. Taking the time to map out your design prevents future structural failures and ensures the wall integrates seamlessly with your existing yard.
Check Local Regulations
Depending on where you live, there may be specific building codes or zoning laws that govern the height and construction of retaining walls. Contacting your local building department can save you from having to dismantle a finished wall if it requires a permit or inspection. This step is crucial for ensuring your project is legal and safe.

Calculating Dimensions
For a small retaining wall, a height of up to three feet is generally manageable without specialized engineering. You should also determine the total length, as this will dictate the number of bricks and the amount of base material you need. Remember to account for the slight backward lean (batter) of the wall, which adds stability.
Gathering Materials and Tools
Using the right materials is just as important as using the right technique. A durable wall relies on a strong base, suitable bricks, and proper fasteners. Investing in quality materials from the start will result in a structure that lasts for decades.
| Category | Items |
|---|---|
| Base Materials | Crushed stone (like 57 stone), landscape fabric, coarse sand |
| Wall Components | Concrete bricks or interlocking retaining wall blocks, capstones, construction adhesive |
| Trenching shovel, tamper, level, rubber mallet, tape measure, string line, gloves |
Excavating the Trench
The foundation of your retaining wall is its trench. This step involves digging a wide, deep channel to accommodate the base materials and the first course of bricks. A properly compacted base is what prevents the wall from sinking or shifting over time.

Begin by marking the wall location with string. Then, dig a trench that is approximately twice the width of a single brick plus an extra six inches for the base material. The depth should be at least six inches, potentially more if you are dealing with soft soil.
Laying the Foundation
Once the trench is dug, you will prepare the sub-base to ensure stability. This process creates a solid, level platform that distributes the weight of the wall evenly.
- Compact the bottom of the trench using a hand tamper or plate compactor.
- Lay a layer of crushed stone about four inches deep and level it with a rake.
- Place landscape fabric over the stone to prevent it from mixing with the soil above.
- Add a one-inch layer of coarse sand and smooth it out to create a final bedding surface.
Building the Wall
With the foundation set, you can begin stacking the bricks or blocks. The goal here is to create a bond that locks the structure together, preventing any lateral movement. Precision is key during this phase.

Start by placing the first course of bricks directly onto the sand bed. Use a rubber mallet to gently tap each piece into place, ensuring they are level and the row is straight. Utilize a level frequently to check the horizontal plane as well as the vertical alignment.
Applying Adhesive and Capping
As you build upward, apply a thin bead of construction adhesive between each layer to add strength. For the top course, you will need capstones. These are wider bricks or specifically designed caps that sit horizontally to finish the top edge and protect the vertical joints from weathering.
Backfilling and Finishing
The final steps involve securing the wall against the pressure of the retained earth and restoring the aesthetic of the surrounding area. This step completes the function and form of the structure.
Once the wall is built to its final height, backfill the area behind it with additional crushed stone. This allows water to drain away from the wall, reducing the hydrostatic pressure that could cause it to bow. Finally, you can plant grass, flowers, or ground cover along the base to integrate the wall naturally into your landscape design.






















