Replacing the felt on a pool table is one of the most effective ways to rejuvenate your equipment, transforming a worn-out playing surface into a fast, smooth, and professional-grade bed. Whether you are a dedicated enthusiast looking to improve your game or a business owner maintaining commercial equipment, doing this job yourself can save significant money compared to professional refelting. This guide provides a detailed, step-by-step process to remove the old fabric and install a fresh layer of quality felt with precision and care.
Before beginning, it is essential to understand the two primary types of pool tables that dictate the removal process. On a slate bed table, the playing surface is a single heavy slab (or multiple pieces) of slate covered by the felt, meaning the fabric can be removed without damaging the core structure. Conversely, coin-operated or solid wood (non-slate) tables often have a thinner, glued playing surface that is part of the table body itself; removing the felt from these requires extreme caution to avoid damaging the playing area. For this guide, we will focus on the standard slate bed, which is the most common setup for mid to high-end tables.
Tools and Materials Required
Success in this project relies heavily on having the right equipment. Attempting this with inadequate tools will lead to frustration and potential damage to the table components. A proper toolkit ensures clean cuts, precise measurements, and a smooth installation without wrinkles or bubbles.

Essential Toolkit
- Staple remover and flat-head screwdriver
- Utility knife with fresh, sharp blades
- Scissors or heavy-duty shears
- New pool table felt (averaging 8 to 9 feet in length)
- Carpenter’s square or T-square
- Rubber mallet
- Gasket tape or electrical tape
- Stapler and 3/8-inch staples
- Measuring tape
Removing the Old Felt
The first phase involves safely detaching the old fabric without harming the slate or rails. This process is methodical and requires patience to avoid tearing the canvas backing, which can make removal easier. Take your time, as rushing can result in gouges in the playing surface that require costly repairs.
Step-by-Step Removal
- Clear the table of all balls and barriers, leaving only the rails and bed.
- Using a staple remover, gently pry up the staples along the long sides (rails) of the table. Work slowly to avoid bending the rails.
- Once the staples are removed, lift the rail cushions slightly and cut the felt directly underneath them using a utility knife. Cut along the seam where the cloth meets the rail.
- With the rail area clear, grasp the loose felt and begin peeling it back toward the foot of the table. The slate is extremely heavy, so do not forcefully pull if resistance is felt; instead, look for additional staples securing the fabric.
- Continue removing the fabric until the slate is completely bare. Be mindful of the slate seams, and avoid applying pressure directly on the pockets, as the metal surround can be brittle.
Preparing the Slate Bed
With the old fabric removed, the slate bed is now exposed and ready for the new installation. This stage is critical for performance; slate is porous and can react to moisture, so preparation is about creating a stable, dry, and clean surface. Any debris left under the new felt will eventually cause bumps or uneven rolling.
Preparation Checklist
- Inspect the slate for any cracks, chips, or loose fragments and repair them as necessary.
- Vacuum or blow out any dust, chalk residue, or dirt from the slate pockets and rails.
- Ensure the slate is completely dry; moisture trapped under the new felt can lead to mold or adhesion issues.
- Remove any old gasket material from the slate seams if you plan to replace the rail bumpers later.
Installing the New Felt
This is the most delicate part of the process, requiring a balance of speed and precision. Pool table felt is heavy and sticky, and once it makes contact with the slate, adjustment time is minimal. The goal is to create a surface that is perfectly smooth and taut, with no sagging or ripples that could affect the roll of the cue ball.

Application Guidelines
- Lay the new felt out flat on the floor. Remove the protective wrapping and allow the fabric to relax and flatten out for about 30 minutes.
- Place the felt on the table with the correct side facing down (the shiny or polished side usually faces the slate).
- Align one side of the felt with the center of a rail pocket, ensuring the triangle/pocket opening is centered in the fabric opening.
- Gently fold the opposite side over the slate. Do not stretch it yet; simply let it hang loosely to ensure coverage of the entire bed.
- Starting from the center of that rail, work outward toward the corner pockets, smoothing out wrinkles with your hands as you go. Use a rubber mallet to gently tap the fabric flat against the slate.
- Once the first side is smooth and wrinkle-free, move to the adjacent side. Pull the fabric tight—enough to remove all slack, but not so tight that it creates tension waves in the material.
- Secure the fabric with staples every 3 to 4 inches along the rail, avoiding the pocket openings. Alternate sides as you work to maintain even tension across the entire bed.
Trimming and Securing the Edges
Once the playing surface is tight and wrinkle-free, the excess material around the rails must be removed to allow the cushions to function correctly. If the overhanging fabric is not trimmed, the bumpers will not compress properly, resulting in poor ball bounce and inaccurate rebounds. This step requires a very steady hand and a sharp blade.
Cutting the Excess
- Fold the rail cushion down so the fabric is hanging loose against the floor.
- Using a utility knife and a metal ruler as a guide, cut the excess fabric off flush with the bottom of the rail. Cut on the waste side of the fabric to avoid damaging the playing surface.
- Apply gasket tape over the cut edge to seal it and protect the fabric from fraying. Fold the tape over the edge to create a smooth lip that prevents the fabric from sticking to the cue ball during play.
- Replace the rails by pressing the cushions back into place and securing them with the hardware removed during disassembly.
Final Inspection and Break-In
After the rails are reinstalled, the installation is complete, but the table is not yet ready for competitive play. New felt needs a brief period to settle and stretch, and the surface requires cleaning to remove the manufacturing dust. Taking the time to finish properly ensures the table performs as intended for years to come.
Post-Installation Steps
- Use a clean brush to remove any loose fibers or debris from the playing surface.
- Slowly rack and break a few balls to help the fabric stretch and settle into its final position.
- Brush the table with the grain one final time to achieve an even pile direction.
- Enjoy your revitalized table; you should notice a significant improvement in speed, roll consistency, and overall playability.





















![Want to Choose the Best Color for Pool Table Felt? [It Matters!]](https://i.pinimg.com/originals/cc/84/3e/cc843e497d752ded36c78f3ccbd4bf12.png)

