"Easy Ecosmart Eco 27 Installation: A Step-by-Step Guide"

Ecosmart Eco 27 Installation: A Comprehensive Guide

Embarking on a greener journey with your new Ecosmart Eco 27 tankless water heater? You're in the right place. This comprehensive guide will walk you through the installation process, ensuring a seamless transition to energy-efficient, on-demand hot water.

Understanding the Ecosmart Eco 27

The Ecosmart Eco 27 is a high-efficiency, electric tankless water heater designed to save you money and reduce your carbon footprint. With a flow rate of 2.7 gallons per minute, it's perfect for homes with one or two bathrooms. Before you start, familiarize yourself with the unit's components and ensure you have all the necessary tools and parts.

Tools and Parts Needed

• Ecosmart Eco 27 water heater
• Teflon tape
• Pipe cutter
• Adjustable wrench
• Screwdriver
• Electrical tape
• Wire stripper
• Copper or PEX pipes (depending on your existing plumbing)
• Wire connectors
• Circuit breaker (if not already installed)

Pre-Installation Preparation

Before you begin, ensure the power is turned off at the main electrical panel. Label wires to avoid confusion during the rewiring process. Also, measure the space where the unit will be installed to ensure it fits. The Ecosmart Eco 27 requires a minimum of 3 inches of clearance on all sides and 7 inches of clearance above for ventilation.

Installing the Ecosmart Eco 27

Plumbing Connections

Connect the water supply pipes to the inlet and outlet ports on the Eco 27. Use Teflon tape on the threads to prevent leaks. The cold water inlet should be on the left, and the hot water outlet on the right. If your plumbing is PEX, you may need to use compression fittings or PEX adapters.

Electrical Connections

The Eco 27 requires a dedicated 240V, 60Hz, 100-amp electrical circuit. If your home doesn't have one, you'll need to install a new circuit. Connect the green wire to the ground, the black wire to the hot, and the white wire to the neutral. Use wire connectors to secure the connections and electrical tape to secure the wires to the unit.

Mounting the Unit

Mount the Eco 27 to the wall using the provided screws and anchors. Ensure it's level and the clearance requirements are met. Once mounted, connect the water and electrical supply lines.

Testing the Ecosmart Eco 27

Turn on the water supply valves and the circuit breaker. Open a hot water faucet to bleed any air from the lines. The Eco 27 should now provide hot water on demand. Use the remote control or the unit's display to adjust the temperature.

Maintenance and Safety

Regular maintenance is key to keeping your Eco 27 running efficiently. Descale the unit every 6-12 months, depending on your water hardness. Always turn off the power and water supply before performing maintenance or troubleshooting.

Professional Installation

While this guide provides a general overview, it's always a good idea to have a professional install your water heater, especially if you're not comfortable working with electrical systems. A professional can ensure the installation is safe and up to code.