Brightening up your space just got easier with IKEA's MITTLED under-cabinet lighting. These sleek, LED strips not only enhance your kitchen's ambiance but also improve functionality. Here's a step-by-step guide on how to install MITTLED under cabinet lighting, ensuring a perfect glow in no time.

Before you start, ensure you've gathered all necessary tools. You'll need a drill, a tape measure, insign pencils, and the MITTLED component box that came with your purchase. Always remember to turn off the power to your cabinets before starting any electrical work for safety.

Planning Your Layout
Measuring is key to ensure your MITTLED strips cover the entire length of your cabinets. Start by measuring the bottom of your cabinets, from edge to edge. Note down these measurements for reference.

Next, decide how many MITTLED strips you need. Each strip is 29.5 inches long and you can cut them to customize the length. For example, if your cabinet is 70 inches, you'll need to use four MITTLED strips (four times 29.5 inches equals 118 inches, which is longer than your cabinet, so you'll have some overlap).
Mapping Out the Light Placement

Before you start drilling, map out where you want the MITTLED strips to go. Place the strips along the bottom edge of your cabinets, using your measurements to ensure they're evenly spaced.
Once you're satisfied with the layout, use the inserter pencil to mark where you'll need to drill. These will be your mounting points for the MITTLED brackets.
Installing the MITTLED Brackets

Now that you've mapped out the placement, it's time to install the brackets. Choose a drill bit that matches the size of your bracket screws. Typically, this is around 1/16" or 1/32".
Using your drill, carefully drill pilot holes at the marked points. Be sure to drill slowly and evenly to avoid cracking the cabinet surface. Once done, secure the MITTLED brackets into these holes using the screws provided.
Wiring the MITTLED Strips

With the brackets installed, it's time to wire up the MITTLED strips. Start by matching the strips to the brackets, ensuring the power supply is connected to a strip that will be near an existing power source.
Follow the wiring diagram in your MITTLED instruction manual to connect the strips correctly. If you're using multiple strips, they'll connect end to end. Ensure all connections are snug and secure.






Connecting the Power Supply
Once your MITTLED strips are all connected, it's time to attach the power supply. This goes in a non-visible spot, preferably behind the cabinet or under the sink. Ensure the power supply is switched off before connection.
Connect one end of the power supply cord to the PC ( Programa Control) terminal on the first MITTLED strip. Then, connect the other end of the power supply cord to a power outlet using a qualified electrician, if possible.
Testing Your MITTLED Lights
Now that everything is wired up, it's time to test your new under-cabinet lighting. Turn on the power at the circuit breaker, then turn the power supply switch to "ON".
Your MITTLED strips should now be illuminated, casting a warm, inviting glow beneath your cabinets. If the light doesn't turn on, double-check your connections and ensure all components are secured correctly.
Congratulations! You've successfully installed IKEA's MITTLED under-cabinet lighting. This not only brightens up your space but also adds a touch of elegance to your kitchen. Enjoy your new, well-lit cabinets!