Savox Waterproof Servo
The SW0231MG is a budget friendly waterproof digital servo with great torque for many applications. This brushed servo features a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge technology with super high 12-bit (4096) resolution and metal gears for your greater precision when dodging puddles. This is a great upgrade if your looking to drive your RC vehicle in any condition...rain, sleet, or snow.
Features:
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Rating: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520
This item is frequently bought with the above mentioned item.
This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.
FEATURES:
Hard anodized aluminum construction
Compression mount, two screws install on either side of arm and
tighten center hole around servo spline
INCLUDES:
Axial 25T Aluminum Servo Horn
Two 2x8mm socket head screws
SPECS:
Length: 0.98" (25mm) from center of servo mounting hole to end of arm
Hole Diameter: 3mm
Pitch:3x30
This item is frequently bought with the above mentioned item.
This is a optional Racers Edge Aluminum single arm servo horn, intended for use with Futaba servos. This heavy duty aluminum servo horn is similar in design to the Racers Edge Pro Adjustable servo horns, but features a third linkage mounting point and does not use lock down screws.
This item compliments the above discussed item.
This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.
FEATURES:
Ideal upgrade for radios found in RTR vehicles
Throttle and steering trim and reverse
Steering dual rate dial
Throttle end point adjustment
Channel three switch
Throttle fail safe
One year limited warranty through Hobby Services beginning at date
of purchase
INCLUDES:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Instruction
Manual and On/Off Switch
REQUIRES:
Servos of modeler's choice
Four AA batteries for transmitter
SPECS:
Transmitter:
Transmitting Frequency: 2.4GHz band
Power Requirement: Four AA cells
Current Drain: 100mA or less
Receiver;
Dimensions: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shared with servo)
Battery Fail Safe Voltage: 3.8V*
Current Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work properly when other type of battery is used
COMMENTS:
2.4GHz FHSS is not compatible with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
type of servos or peripherals.
High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts
digital servos including the BLS series and most peripheral
equipment such as brushless ESCs
Features:
- Combines leading edge
technology with super high 12 bit (4096) resolution and metal gears. - Waterproof.
- Brushed motor
- Extremely strong metal gears ensure long-life and durability.
- Our servos are totally green ? from materials to production, these servos are environmentally friendly.
- Ideal for RC cars, trucks, buggies, and boats.
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Rating: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520
This item is frequently bought with the above mentioned item.
This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.
FEATURES:
Hard anodized aluminum construction
Compression mount, two screws install on either side of arm and
tighten center hole around servo spline
INCLUDES:
Axial 25T Aluminum Servo Horn
Two 2x8mm socket head screws
SPECS:
Length: 0.98" (25mm) from center of servo mounting hole to end of arm
Hole Diameter: 3mm
Pitch:3x30
This item is frequently bought with the above mentioned item.
This is a optional Racers Edge Aluminum single arm servo horn, intended for use with Futaba servos. This heavy duty aluminum servo horn is similar in design to the Racers Edge Pro Adjustable servo horns, but features a third linkage mounting point and does not use lock down screws.
This item compliments the above discussed item.
This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.
FEATURES:
Ideal upgrade for radios found in RTR vehicles
Throttle and steering trim and reverse
Steering dual rate dial
Throttle end point adjustment
Channel three switch
Throttle fail safe
One year limited warranty through Hobby Services beginning at date
of purchase
INCLUDES:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Instruction
Manual and On/Off Switch
REQUIRES:
Servos of modeler's choice
Four AA batteries for transmitter
SPECS:
Transmitter:
Transmitting Frequency: 2.4GHz band
Power Requirement: Four AA cells
Current Drain: 100mA or less
Receiver;
Dimensions: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shared with servo)
Battery Fail Safe Voltage: 3.8V*
Current Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work properly when other type of battery is used
COMMENTS:
2.4GHz FHSS is not compatible with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
type of servos or peripherals.
High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts
digital servos including the BLS series and most peripheral
equipment such as brushless ESCs
Brand: Savox
Up Next...
