Building a Single Drawer Cabinet: A Comprehensive Guide
Embarking on a DIY furniture project can be both rewarding and challenging. Building a single drawer cabinet is an excellent starting point for beginners, offering a balance between simplicity and functionality. This step-by-step guide will walk you through the process, ensuring you create a sturdy and stylish cabinet that enhances your space.
Gather Your Materials and Tools
Before you begin, ensure you have all the necessary materials and tools at hand. Here's a list to help you prepare:
- 1x8, 1x10, and 1x12 boards (quantities will depend on your cabinet's dimensions)
- 1/4" and 1/2" plywood
- 1 1/4" pocket hole screws
- 1 1/4" and 2 1/2" wood screws
- Wood glue
- Sandpaper (120-grit and 220-grit)
- Stain or paint (optional)
- Circular saw
- Drill
- Jigsaw
- Clamps
- Tape measure
- Pencil
- Safety glasses
Design and Measure
First, decide on the dimensions of your cabinet. For this guide, we'll assume a cabinet that's 36" wide, 18" deep, and 36" tall. Once you've determined the size, use a tape measure to mark the dimensions on your boards. Remember to account for the thickness of the plywood when measuring.

Cut List
Here's a cut list based on the assumed dimensions. Adjust as needed to fit your desired size:
| Part | Dimension | Quantity |
|---|---|---|
| Side panels | 36" W x 18" D | 2 |
| Top panel | 36" W x 18" D | 1 |
| Bottom panel | 36" W x 18" D | 1 |
| Back panel | 36" W x 36" H | 1 |
| Drawer face | 18" W x 12" H | 1 |
| Drawer sides | 12" W x 12" H | 2 |
| Drawer bottom | 18" W x 12" L | 1 |
| Drawer back | 18" W x 12" H | 1 |
| Support cleats | 18" L x 1 1/2" W | 2 |
Assemble the Cabinet Box
Begin by attaching the side panels to the back panel using 1 1/4" pocket hole screws. Apply wood glue to the joints before screwing. Next, attach the top and bottom panels, ensuring the cabinet is square. Allow the glue to dry completely before proceeding.
Add Support Cleats
Measure and mark the center of the cabinet's interior width. Cut two support cleats to fit between the side panels and attach them using 1 1/4" screws. These will support the drawer and ensure it slides smoothly.

Build the Drawer
Assemble the drawer by attaching the sides, back, and bottom using 1 1/4" screws. Apply glue to the joints for added strength. Once the drawer is assembled, attach the face using 2 1/2" screws. Ensure the drawer fits snugly within the cabinet box, making any necessary adjustments.
Sand and Finish
Sand the entire cabinet, starting with 120-grit sandpaper and finishing with 220-grit. Wipe away any dust, and apply your chosen stain or paint. Allow the finish to dry completely before using the cabinet.
Congratulations! You've successfully built a single drawer cabinet. This piece will not only enhance your space but also serve as a testament to your newfound DIY skills. Happy building!