Installing Exposed Cabinet Hinges: A Step-by-Step Guide
Exposed cabinet hinges are a stylish and functional choice for your cabinet doors, offering a sleek, modern look while providing full access to the cabinet interior. Installing them may seem daunting, but with the right tools and our comprehensive guide, you'll have your cabinets looking and functioning beautifully in no time.
Tools and Materials Needed
Before you begin, ensure you have the following tools and materials on hand:
- Exposed cabinet hinges (ensure they match your cabinet style and door thickness)
- Drill with a 1/8" drill bit
- Screwdriver (Philips or flathead, depending on your hinge type)
- Tape measure
- Pencil
- Level
- Sandpaper (120-grit)
- Wood glue (optional)
Preparation: Measuring and Marking
Accurate measurement is crucial for a perfect fit. Here's how to measure and mark your cabinet and door:

- Measure the width and height of your cabinet opening and mark the center points on both sides.
- Measure the thickness of your cabinet door and subtract 1/8" to determine the depth at which you'll attach the hinge to the cabinet.
- Mark this depth on the inside edge of the cabinet opening, using a level to ensure the mark is horizontal.
- Measure and mark the center point of your cabinet door where the hinge will be attached.
Installing the Hinge on the Cabinet
Now that you've marked your cabinet, it's time to install the hinge:
- Using your drill and a 1/8" drill bit, drill a pilot hole at your marked center point.
- Apply a small amount of wood glue to the hinge plate (optional, but it can help prevent the hinge from loosening over time).
- Position the hinge plate against the inside edge of the cabinet, aligning it with your marked depth and pilot hole.
- Using your screwdriver, attach the hinge plate to the cabinet using the screws provided. Ensure the hinge is level and the screw is tight.
Installing the Hinge on the Cabinet Door
Next, you'll install the other half of the hinge on your cabinet door:
- Position the hinge arm against the edge of your cabinet door, aligning it with your marked center point.
- Drill a pilot hole through the hinge arm and into the door using your 1/8" drill bit.
- Attach the hinge arm to the door using the screws provided, ensuring the hinge is level and the screw is tight.
Attaching the Hinge Arm to the Hinge Plate
Finally, you'll attach the hinge arm to the hinge plate, allowing your cabinet door to swing open and closed:

- Align the hinge arm with the hinge plate, ensuring the door opens and closes smoothly.
- Engage the hinge arm with the hinge plate, and test the door's movement.
- If necessary, adjust the hinge's position using the screws provided to fine-tune the door's alignment.
Finishing Touches
Once your door is hung and functioning properly, you can make any final adjustments or touch-ups:
- Use sandpaper to smooth any rough edges or marks made during installation.
- Wipe away any dust or debris with a damp cloth.
- Apply a fresh coat of paint or stain to the door if necessary, allowing it to dry completely before using the cabinet.
Congratulations! You've successfully installed exposed cabinet hinges, adding a stylish touch to your cabinets while ensuring easy access to their contents. With a little patience and the right tools, you've transformed your cabinets into a functional and attractive feature of your space.