Embarking on a DIY furniture assembly journey with IKEA's IVAR cabinet? You're in the right place. This comprehensive guide will walk you through the process, ensuring you end up with a stylish, functional storage solution that's a perfect fit for your space. Let's dive in.
Understanding the IVAR Cabinet
The IVAR cabinet is a versatile, sturdy piece from IKEA's collection. It's made of solid wood and particleboard, with a durable finish that's easy to clean. Available in various sizes and colors, it's an excellent choice for living rooms, bedrooms, or home offices. Before you start, ensure you have all the necessary tools and parts.
Tools You'll Need
- Rubber mallet
- Hammer
- Screwdriver (Philips #2) - included with the cabinet
- Pencil
- Tape measure
- Level
Step-by-Step IVAR Cabinet Assembly Instructions
Step 1: Prepare Your Workspace
Choose a well-lit, spacious area to assemble your IVAR cabinet. Lay out all the parts and tools, ensuring you have easy access to them. It's also a good idea to have a towel or blanket on hand to protect your floor from scratches.

Step 2: Assemble the Cabinet Box
Begin by attaching the side panels to the back panel using the included screws. Align the holes carefully, then secure with screws. Use a rubber mallet to gently tap the panels together if needed. Repeat this process to attach the other side panel.
Next, attach the top and bottom panels. Align the holes, then secure with screws. Ensure the cabinet box is square by measuring diagonally from corner to corner. If it's not square, adjust the panels slightly until it is.
Step 3: Install the Shelves
The IVAR cabinet comes with adjustable shelves. Decide on the height you want for your shelves, then mark the holes on the inside of the cabinet box. Use a pencil to mark the holes, then drill pilot holes to prevent the wood from splitting.

Insert the shelf pins into the pilot holes, then place the shelves on top of the pins. Use a rubber mallet to gently tap the shelves down until they're level with the pins. Repeat this process for each shelf.
Step 4: Attach the Door and Drawer (if applicable)
If your IVAR cabinet comes with a door or drawer, now is the time to attach it. Align the hinges or drawer slides with the cabinet box, then secure with screws. Ensure the door or drawer opens and closes smoothly.
Step 5: Attach the Legs
The IVAR cabinet comes with adjustable legs that allow you to level the cabinet even if your floor is uneven. Attach the legs to the bottom of the cabinet box using the included screws. Use a level to ensure the cabinet is level both front to back and side to side.
Step 6: Finishing Touches
Once your IVAR cabinet is assembled, take a step back and admire your handiwork. If you'd like, you can add hardware like knobs or handles to the doors and drawers. You can also paint or stain the cabinet to match your decor.
Troubleshooting Common Issues
If you're having trouble with your IVAR cabinet assembly, here are a few common issues and solutions:
| Issue | Solution |
|---|---|
| Screws won't go in | Ensure you're using the correct screws and that the holes are aligned properly. You can also use a rubber mallet to gently tap the pieces together. |
| Cabinet is wobbly | Check that the legs are securely attached and that the cabinet is level. You can also add a brace or support to the back of the cabinet to prevent wobbling. |
| Door or drawer won't close | Check that the hinges or drawer slides are properly aligned. You can also adjust the height of the shelves to make more room for the door or drawer. |
Remember, patience and careful attention to detail are key when assembling furniture. If you're still having trouble, don't hesitate to reach out to IKEA's customer service for assistance.