Ivar Cabinet with Doors: Step-by-Step Assembly Instructions
Embarking on the assembly of your new Ivar cabinet with doors? You're in the right place. This comprehensive guide will walk you through the process, ensuring a smooth and efficient assembly. Let's dive in!
Understanding Your Ivar Cabinet Parts
Before you start, familiarize yourself with the components of your Ivar cabinet. The main parts include:
- Side panels
- Back panel
- Shelves
- Doors
- Hinges
- Screws and assembly hardware
Gather Your Tools
To assemble your Ivar cabinet, you'll need the following tools:

- A hammer
- A screwdriver (Philips head)
- A drill (optional, for pilot holes)
- A measuring tape
- A pencil
Assemble the Cabinet Frame
Start by attaching the side panels to the back panel. Align the panels and use the included screws to secure them together. Ensure the cabinet is square by measuring diagonally from corner to corner; adjust as needed.
Install the Shelves
Measure and mark the shelf positions on the inside of the cabinet frame. Drill pilot holes (optional but recommended) to prevent the shelves from splitting. Attach the shelves using the provided screws.
Attach the Hinges to the Doors
Position the hinges on the doors and mark the screw holes. Drill pilot holes, then attach the hinges using the provided screws. Ensure the hinges are aligned properly for smooth door operation.

Hang the Doors
Hold the door in place and mark the hinge screw holes on the cabinet frame. Drill pilot holes, then attach the door using the screws provided with the hinges. Repeat this process for the second door.
Finishing Touches
Give your Ivar cabinet a final check to ensure all components are secure and functioning properly. If you've chosen to paint or stain your cabinet, now is the time to apply the finish. Allow the cabinet to dry completely before using it.
Congratulations! You've successfully assembled your Ivar cabinet with doors. Enjoy your new storage solution!