/src/mozilla-central/media/libjpeg/jfdctint.c

Source (jump to first uncovered line)
/*
 * jfdctint.c
 *
 * This file was part of the Independent JPEG Group's software.
 * Copyright (C) 1991-1996, Thomas G. Lane.
 * libjpeg-turbo Modifications:
 * Copyright (C) 2015, D. R. Commander.
 * For conditions of distribution and use, see the accompanying README.ijg
 * file.
 *
 * This file contains a slow-but-accurate integer implementation of the
 * forward DCT (Discrete Cosine Transform).
 *
 * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
 * on each column.  Direct algorithms are also available, but they are
 * much more complex and seem not to be any faster when reduced to code.
 *
 * This implementation is based on an algorithm described in
 *   C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT
 *   Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics,
 *   Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991.
 * The primary algorithm described there uses 11 multiplies and 29 adds.
 * We use their alternate method with 12 multiplies and 32 adds.
 * The advantage of this method is that no data path contains more than one
 * multiplication; this allows a very simple and accurate implementation in
 * scaled fixed-point arithmetic, with a minimal number of shifts.
 */

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"
#include "jdct.h"               /* Private declarations for DCT subsystem */

#ifdef DCT_ISLOW_SUPPORTED


/*
 * This module is specialized to the case DCTSIZE = 8.
 */

#if DCTSIZE != 8
  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
#endif


/*
 * The poop on this scaling stuff is as follows:
 *
 * Each 1-D DCT step produces outputs which are a factor of sqrt(N)
 * larger than the true DCT outputs.  The final outputs are therefore
 * a factor of N larger than desired; since N=8 this can be cured by
 * a simple right shift at the end of the algorithm.  The advantage of
 * this arrangement is that we save two multiplications per 1-D DCT,
 * because the y0 and y4 outputs need not be divided by sqrt(N).
 * In the IJG code, this factor of 8 is removed by the quantization step
 * (in jcdctmgr.c), NOT in this module.
 *
 * We have to do addition and subtraction of the integer inputs, which
 * is no problem, and multiplication by fractional constants, which is
 * a problem to do in integer arithmetic.  We multiply all the constants
 * by CONST_SCALE and convert them to integer constants (thus retaining
 * CONST_BITS bits of precision in the constants).  After doing a
 * multiplication we have to divide the product by CONST_SCALE, with proper
 * rounding, to produce the correct output.  This division can be done
 * cheaply as a right shift of CONST_BITS bits.  We postpone shifting
 * as long as possible so that partial sums can be added together with
 * full fractional precision.
 *
 * The outputs of the first pass are scaled up by PASS1_BITS bits so that
 * they are represented to better-than-integral precision.  These outputs
 * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word
 * with the recommended scaling.  (For 12-bit sample data, the intermediate
 * array is JLONG anyway.)
 *
 * To avoid overflow of the 32-bit intermediate results in pass 2, we must
 * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26.  Error analysis
 * shows that the values given below are the most effective.
 */

#if BITS_IN_JSAMPLE == 8
#define CONST_BITS  13
#define PASS1_BITS  2
#else
#define CONST_BITS  13
#define PASS1_BITS  1           /* lose a little precision to avoid overflow */
#endif

/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
 * causing a lot of useless floating-point operations at run time.
 * To get around this we use the following pre-calculated constants.
 * If you change CONST_BITS you may want to add appropriate values.
 * (With a reasonable C compiler, you can just rely on the FIX() macro...)
 */

#if CONST_BITS == 13
#define FIX_0_298631336  ((JLONG)  2446)        /* FIX(0.298631336) */
#define FIX_0_390180644  ((JLONG)  3196)        /* FIX(0.390180644) */
#define FIX_0_541196100  ((JLONG)  4433)        /* FIX(0.541196100) */
#define FIX_0_765366865  ((JLONG)  6270)        /* FIX(0.765366865) */
#define FIX_0_899976223  ((JLONG)  7373)        /* FIX(0.899976223) */
#define FIX_1_175875602  ((JLONG)  9633)        /* FIX(1.175875602) */
#define FIX_1_501321110  ((JLONG)  12299)       /* FIX(1.501321110) */
#define FIX_1_847759065  ((JLONG)  15137)       /* FIX(1.847759065) */
#define FIX_1_961570560  ((JLONG)  16069)       /* FIX(1.961570560) */
#define FIX_2_053119869  ((JLONG)  16819)       /* FIX(2.053119869) */
#define FIX_2_562915447  ((JLONG)  20995)       /* FIX(2.562915447) */
#define FIX_3_072711026  ((JLONG)  25172)       /* FIX(3.072711026) */
#else
#define FIX_0_298631336  FIX(0.298631336)
#define FIX_0_390180644  FIX(0.390180644)
#define FIX_0_541196100  FIX(0.541196100)
#define FIX_0_765366865  FIX(0.765366865)
#define FIX_0_899976223  FIX(0.899976223)
#define FIX_1_175875602  FIX(1.175875602)
#define FIX_1_501321110  FIX(1.501321110)
#define FIX_1_847759065  FIX(1.847759065)
#define FIX_1_961570560  FIX(1.961570560)
#define FIX_2_053119869  FIX(2.053119869)
#define FIX_2_562915447  FIX(2.562915447)
#define FIX_3_072711026  FIX(3.072711026)
#endif


/* Multiply an JLONG variable by an JLONG constant to yield an JLONG result.
 * For 8-bit samples with the recommended scaling, all the variable
 * and constant values involved are no more than 16 bits wide, so a
 * 16x16->32 bit multiply can be used instead of a full 32x32 multiply.
 * For 12-bit samples, a full 32-bit multiplication will be needed.
 */

#if BITS_IN_JSAMPLE == 8
#define MULTIPLY(var,const)  MULTIPLY16C16(var,const)
#else
#define MULTIPLY(var,const)  ((var) * (const))
#endif


/*
 * Perform the forward DCT on one block of samples.
 */

GLOBAL(void)
jpeg_fdct_islow (DCTELEM *data)
{
  JLONG tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
  JLONG tmp10, tmp11, tmp12, tmp13;
  JLONG z1, z2, z3, z4, z5;
  DCTELEM *dataptr;
  int ctr;
  SHIFT_TEMPS

  /* Pass 1: process rows. */
  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
  /* furthermore, we scale the results by 2**PASS1_BITS. */

  dataptr = data;
  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
    tmp0 = dataptr[0] + dataptr[7];
    tmp7 = dataptr[0] - dataptr[7];
    tmp1 = dataptr[1] + dataptr[6];
    tmp6 = dataptr[1] - dataptr[6];
    tmp2 = dataptr[2] + dataptr[5];
    tmp5 = dataptr[2] - dataptr[5];
    tmp3 = dataptr[3] + dataptr[4];
    tmp4 = dataptr[3] - dataptr[4];

    /* Even part per LL&M figure 1 --- note that published figure is faulty;
     * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
     */

    tmp10 = tmp0 + tmp3;
    tmp13 = tmp0 - tmp3;
    tmp11 = tmp1 + tmp2;
    tmp12 = tmp1 - tmp2;

    dataptr[0] = (DCTELEM) LEFT_SHIFT(tmp10 + tmp11, PASS1_BITS);
    dataptr[4] = (DCTELEM) LEFT_SHIFT(tmp10 - tmp11, PASS1_BITS);

    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
    dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
                                   CONST_BITS-PASS1_BITS);
    dataptr[6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
                                   CONST_BITS-PASS1_BITS);

    /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
     * cK represents cos(K*pi/16).
     * i0..i3 in the paper are tmp4..tmp7 here.
     */

    z1 = tmp4 + tmp7;
    z2 = tmp5 + tmp6;
    z3 = tmp4 + tmp6;
    z4 = tmp5 + tmp7;
    z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */

    tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
    tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
    tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
    tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
    z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
    z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
    z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
    z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */

    z3 += z5;
    z4 += z5;

    dataptr[7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, CONST_BITS-PASS1_BITS);
    dataptr[5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, CONST_BITS-PASS1_BITS);
    dataptr[3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, CONST_BITS-PASS1_BITS);
    dataptr[1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, CONST_BITS-PASS1_BITS);

    dataptr += DCTSIZE;         /* advance pointer to next row */
  }

  /* Pass 2: process columns.
   * We remove the PASS1_BITS scaling, but leave the results scaled up
   * by an overall factor of 8.
   */

  dataptr = data;
  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
    tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
    tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
    tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
    tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];

    /* Even part per LL&M figure 1 --- note that published figure is faulty;
     * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
     */

    tmp10 = tmp0 + tmp3;
    tmp13 = tmp0 - tmp3;
    tmp11 = tmp1 + tmp2;
    tmp12 = tmp1 - tmp2;

    dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS);
    dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS);

    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
    dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
                                           CONST_BITS+PASS1_BITS);
    dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
                                           CONST_BITS+PASS1_BITS);

    /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
     * cK represents cos(K*pi/16).
     * i0..i3 in the paper are tmp4..tmp7 here.
     */

    z1 = tmp4 + tmp7;
    z2 = tmp5 + tmp6;
    z3 = tmp4 + tmp6;
    z4 = tmp5 + tmp7;
    z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */

    tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
    tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
    tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
    tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
    z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
    z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
    z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
    z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */

    z3 += z5;
    z4 += z5;

    dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp4 + z1 + z3,
                                           CONST_BITS+PASS1_BITS);
    dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp5 + z2 + z4,
                                           CONST_BITS+PASS1_BITS);
    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp6 + z2 + z3,
                                           CONST_BITS+PASS1_BITS);
    dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp7 + z1 + z4,
                                           CONST_BITS+PASS1_BITS);

    dataptr++;                  /* advance pointer to next column */
  }
}

#endif /* DCT_ISLOW_SUPPORTED */

Coverage Report

Created: 2018-09-25 14:53

Line	Count	Source (jump to first uncovered line)
1		/*
2		* jfdctint.c
3		*
4		* This file was part of the Independent JPEG Group's software.
5		* Copyright (C) 1991-1996, Thomas G. Lane.
6		* libjpeg-turbo Modifications:
7		* Copyright (C) 2015, D. R. Commander.
8		* For conditions of distribution and use, see the accompanying README.ijg
9		* file.
10		*
11		* This file contains a slow-but-accurate integer implementation of the
12		* forward DCT (Discrete Cosine Transform).
13		*
14		* A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
15		* on each column. Direct algorithms are also available, but they are
16		* much more complex and seem not to be any faster when reduced to code.
17		*
18		* This implementation is based on an algorithm described in
19		* C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT
20		* Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics,
21		* Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991.
22		* The primary algorithm described there uses 11 multiplies and 29 adds.
23		* We use their alternate method with 12 multiplies and 32 adds.
24		* The advantage of this method is that no data path contains more than one
25		* multiplication; this allows a very simple and accurate implementation in
26		* scaled fixed-point arithmetic, with a minimal number of shifts.
27		*/
28
29		#define JPEG_INTERNALS
30		#include "jinclude.h"
31		#include "jpeglib.h"
32		#include "jdct.h" /* Private declarations for DCT subsystem */
33
34		#ifdef DCT_ISLOW_SUPPORTED
35
36
37		/*
38		* This module is specialized to the case DCTSIZE = 8.
39		*/
40
41		#if DCTSIZE != 8
42		Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
43		#endif
44
45
46		/*
47		* The poop on this scaling stuff is as follows:
48		*
49		* Each 1-D DCT step produces outputs which are a factor of sqrt(N)
50		* larger than the true DCT outputs. The final outputs are therefore
51		* a factor of N larger than desired; since N=8 this can be cured by
52		* a simple right shift at the end of the algorithm. The advantage of
53		* this arrangement is that we save two multiplications per 1-D DCT,
54		* because the y0 and y4 outputs need not be divided by sqrt(N).
55		* In the IJG code, this factor of 8 is removed by the quantization step
56		* (in jcdctmgr.c), NOT in this module.
57		*
58		* We have to do addition and subtraction of the integer inputs, which
59		* is no problem, and multiplication by fractional constants, which is
60		* a problem to do in integer arithmetic. We multiply all the constants
61		* by CONST_SCALE and convert them to integer constants (thus retaining
62		* CONST_BITS bits of precision in the constants). After doing a
63		* multiplication we have to divide the product by CONST_SCALE, with proper
64		* rounding, to produce the correct output. This division can be done
65		* cheaply as a right shift of CONST_BITS bits. We postpone shifting
66		* as long as possible so that partial sums can be added together with
67		* full fractional precision.
68		*
69		* The outputs of the first pass are scaled up by PASS1_BITS bits so that
70		* they are represented to better-than-integral precision. These outputs
71		* require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word
72		* with the recommended scaling. (For 12-bit sample data, the intermediate
73		* array is JLONG anyway.)
74		*
75		* To avoid overflow of the 32-bit intermediate results in pass 2, we must
76		* have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis
77		* shows that the values given below are the most effective.
78		*/
79
80		#if BITS_IN_JSAMPLE == 8
81		#define CONST_BITS 13
82		#define PASS1_BITS 2
83		#else
84		#define CONST_BITS 13
85		#define PASS1_BITS 1 /* lose a little precision to avoid overflow */
86		#endif
87
88		/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
89		* causing a lot of useless floating-point operations at run time.
90		* To get around this we use the following pre-calculated constants.
91		* If you change CONST_BITS you may want to add appropriate values.
92		* (With a reasonable C compiler, you can just rely on the FIX() macro...)
93		*/
94
95		#if CONST_BITS == 13
96		#define FIX_0_298631336 ((JLONG) 2446) /* FIX(0.298631336) */
97		#define FIX_0_390180644 ((JLONG) 3196) /* FIX(0.390180644) */
98		#define FIX_0_541196100 ((JLONG) 4433) /* FIX(0.541196100) */
99		#define FIX_0_765366865 ((JLONG) 6270) /* FIX(0.765366865) */
100		#define FIX_0_899976223 ((JLONG) 7373) /* FIX(0.899976223) */
101		#define FIX_1_175875602 ((JLONG) 9633) /* FIX(1.175875602) */
102		#define FIX_1_501321110 ((JLONG) 12299) /* FIX(1.501321110) */
103		#define FIX_1_847759065 ((JLONG) 15137) /* FIX(1.847759065) */
104		#define FIX_1_961570560 ((JLONG) 16069) /* FIX(1.961570560) */
105		#define FIX_2_053119869 ((JLONG) 16819) /* FIX(2.053119869) */
106		#define FIX_2_562915447 ((JLONG) 20995) /* FIX(2.562915447) */
107		#define FIX_3_072711026 ((JLONG) 25172) /* FIX(3.072711026) */
108		#else
109		#define FIX_0_298631336 FIX(0.298631336)
110		#define FIX_0_390180644 FIX(0.390180644)
111		#define FIX_0_541196100 FIX(0.541196100)
112		#define FIX_0_765366865 FIX(0.765366865)
113		#define FIX_0_899976223 FIX(0.899976223)
114		#define FIX_1_175875602 FIX(1.175875602)
115		#define FIX_1_501321110 FIX(1.501321110)
116		#define FIX_1_847759065 FIX(1.847759065)
117		#define FIX_1_961570560 FIX(1.961570560)
118		#define FIX_2_053119869 FIX(2.053119869)
119		#define FIX_2_562915447 FIX(2.562915447)
120		#define FIX_3_072711026 FIX(3.072711026)
121		#endif
122
123
124		/* Multiply an JLONG variable by an JLONG constant to yield an JLONG result.
125		* For 8-bit samples with the recommended scaling, all the variable
126		* and constant values involved are no more than 16 bits wide, so a
127		* 16x16->32 bit multiply can be used instead of a full 32x32 multiply.
128		* For 12-bit samples, a full 32-bit multiplication will be needed.
129		*/
130
131		#if BITS_IN_JSAMPLE == 8
132	0	#define MULTIPLY(var,const) MULTIPLY16C16(var,const)
133		#else
134		#define MULTIPLY(var,const) ((var) * (const))
135		#endif
136
137
138		/*
139		* Perform the forward DCT on one block of samples.
140		*/
141
142		GLOBAL(void)
143		jpeg_fdct_islow (DCTELEM *data)
144	0	{
145	0	JLONG tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
146	0	JLONG tmp10, tmp11, tmp12, tmp13;
147	0	JLONG z1, z2, z3, z4, z5;
148	0	DCTELEM *dataptr;
149	0	int ctr;
150	0	SHIFT_TEMPS
151	0
152	0	/* Pass 1: process rows. */
153	0	/* Note results are scaled up by sqrt(8) compared to a true DCT; */
154	0	/* furthermore, we scale the results by 2*PASS1_BITS. /
155	0
156	0	dataptr = data;
157	0	for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
158	0	tmp0 = dataptr[0] + dataptr[7];
159	0	tmp7 = dataptr[0] - dataptr[7];
160	0	tmp1 = dataptr[1] + dataptr[6];
161	0	tmp6 = dataptr[1] - dataptr[6];
162	0	tmp2 = dataptr[2] + dataptr[5];
163	0	tmp5 = dataptr[2] - dataptr[5];
164	0	tmp3 = dataptr[3] + dataptr[4];
165	0	tmp4 = dataptr[3] - dataptr[4];
166	0
167	0	/* Even part per LL&M figure 1 --- note that published figure is faulty;
168	0	* rotator "sqrt(2)c1" should be "sqrt(2)c6".
169	0	*/
170	0
171	0	tmp10 = tmp0 + tmp3;
172	0	tmp13 = tmp0 - tmp3;
173	0	tmp11 = tmp1 + tmp2;
174	0	tmp12 = tmp1 - tmp2;
175	0
176	0	dataptr[0] = (DCTELEM) LEFT_SHIFT(tmp10 + tmp11, PASS1_BITS);
177	0	dataptr[4] = (DCTELEM) LEFT_SHIFT(tmp10 - tmp11, PASS1_BITS);
178	0
179	0	z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
180	0	dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
181	0	CONST_BITS-PASS1_BITS);
182	0	dataptr[6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
183	0	CONST_BITS-PASS1_BITS);
184	0
185	0	/* Odd part per figure 8 --- note paper omits factor of sqrt(2).
186	0	* cK represents cos(K*pi/16).
187	0	* i0..i3 in the paper are tmp4..tmp7 here.
188	0	*/
189	0
190	0	z1 = tmp4 + tmp7;
191	0	z2 = tmp5 + tmp6;
192	0	z3 = tmp4 + tmp6;
193	0	z4 = tmp5 + tmp7;
194	0	z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */
195	0
196	0	tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
197	0	tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
198	0	tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
199	0	tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
200	0	z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
201	0	z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
202	0	z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
203	0	z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
204	0
205	0	z3 += z5;
206	0	z4 += z5;
207	0
208	0	dataptr[7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, CONST_BITS-PASS1_BITS);
209	0	dataptr[5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, CONST_BITS-PASS1_BITS);
210	0	dataptr[3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, CONST_BITS-PASS1_BITS);
211	0	dataptr[1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, CONST_BITS-PASS1_BITS);
212	0
213	0	dataptr += DCTSIZE; /* advance pointer to next row */
214	0	}
215	0
216	0	/* Pass 2: process columns.
217	0	* We remove the PASS1_BITS scaling, but leave the results scaled up
218	0	* by an overall factor of 8.
219	0	*/
220	0
221	0	dataptr = data;
222	0	for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
223	0	tmp0 = dataptr[DCTSIZE0] + dataptr[DCTSIZE7];
224	0	tmp7 = dataptr[DCTSIZE0] - dataptr[DCTSIZE7];
225	0	tmp1 = dataptr[DCTSIZE1] + dataptr[DCTSIZE6];
226	0	tmp6 = dataptr[DCTSIZE1] - dataptr[DCTSIZE6];
227	0	tmp2 = dataptr[DCTSIZE2] + dataptr[DCTSIZE5];
228	0	tmp5 = dataptr[DCTSIZE2] - dataptr[DCTSIZE5];
229	0	tmp3 = dataptr[DCTSIZE3] + dataptr[DCTSIZE4];
230	0	tmp4 = dataptr[DCTSIZE3] - dataptr[DCTSIZE4];
231	0
232	0	/* Even part per LL&M figure 1 --- note that published figure is faulty;
233	0	* rotator "sqrt(2)c1" should be "sqrt(2)c6".
234	0	*/
235	0
236	0	tmp10 = tmp0 + tmp3;
237	0	tmp13 = tmp0 - tmp3;
238	0	tmp11 = tmp1 + tmp2;
239	0	tmp12 = tmp1 - tmp2;
240	0
241	0	dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS);
242	0	dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS);
243	0
244	0	z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
245	0	dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
246	0	CONST_BITS+PASS1_BITS);
247	0	dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
248	0	CONST_BITS+PASS1_BITS);
249	0
250	0	/* Odd part per figure 8 --- note paper omits factor of sqrt(2).
251	0	* cK represents cos(K*pi/16).
252	0	* i0..i3 in the paper are tmp4..tmp7 here.
253	0	*/
254	0
255	0	z1 = tmp4 + tmp7;
256	0	z2 = tmp5 + tmp6;
257	0	z3 = tmp4 + tmp6;
258	0	z4 = tmp5 + tmp7;
259	0	z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */
260	0
261	0	tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
262	0	tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
263	0	tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
264	0	tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
265	0	z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
266	0	z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
267	0	z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
268	0	z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
269	0
270	0	z3 += z5;
271	0	z4 += z5;
272	0
273	0	dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp4 + z1 + z3,
274	0	CONST_BITS+PASS1_BITS);
275	0	dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp5 + z2 + z4,
276	0	CONST_BITS+PASS1_BITS);
277	0	dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp6 + z2 + z3,
278	0	CONST_BITS+PASS1_BITS);
279	0	dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp7 + z1 + z4,
280	0	CONST_BITS+PASS1_BITS);
281	0
282	0	dataptr++; /* advance pointer to next column */
283	0	}
284	0	}
285
286		#endif /* DCT_ISLOW_SUPPORTED */