/src/FreeRDP/channels/serial/client/serial_main.c

Source
/**
 * FreeRDP: A Remote Desktop Protocol Implementation
 * Serial Port Device Service Virtual Channel
 *
 * Copyright 2011 O.S. Systems Software Ltda.
 * Copyright 2011 Eduardo Fiss Beloni <beloni@ossystems.com.br>
 * Copyright 2014 Hewlett-Packard Development Company, L.P.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <freerdp/config.h>

#include <errno.h>
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>

#include <winpr/collections.h>
#include <winpr/comm.h>
#include <winpr/crt.h>
#include <winpr/stream.h>
#include <winpr/synch.h>
#include <winpr/thread.h>
#include <winpr/wlog.h>
#include <winpr/assert.h>

#include <freerdp/freerdp.h>
#include <freerdp/channels/rdpdr.h>
#include <freerdp/channels/log.h>
#include <freerdp/utils/rdpdr_utils.h>

#define TAG CHANNELS_TAG("serial.client")

#define MAX_IRP_THREADS 5

typedef struct
{
  DEVICE device;
  BOOL permissive;
  SERIAL_DRIVER_ID ServerSerialDriverId;
  HANDLE hComm;

  wLog* log;
  HANDLE MainThread;
  wMessageQueue* MainIrpQueue;

  /* one thread per pending IRP and indexed according their CompletionId */
  wListDictionary* IrpThreads;
  CRITICAL_SECTION TerminatingIrpThreadsLock;
  rdpContext* rdpcontext;
} SERIAL_DEVICE;

typedef struct
{
  SERIAL_DEVICE* serial;
  IRP* irp;
} IRP_THREAD_DATA;

static void close_terminated_irp_thread_handles(SERIAL_DEVICE* serial, BOOL forceClose);
static NTSTATUS GetLastErrorToIoStatus(SERIAL_DEVICE* serial)
{
  /* http://msdn.microsoft.com/en-us/library/ff547466%28v=vs.85%29.aspx#generic_status_values_for_serial_device_control_requests
   */
  switch (GetLastError())
  {
    case ERROR_BAD_DEVICE:
      return STATUS_INVALID_DEVICE_REQUEST;

    case ERROR_CALL_NOT_IMPLEMENTED:
      return STATUS_NOT_IMPLEMENTED;

    case ERROR_CANCELLED:
      return STATUS_CANCELLED;

    case ERROR_INSUFFICIENT_BUFFER:
      return STATUS_BUFFER_TOO_SMALL; /* NB: STATUS_BUFFER_SIZE_TOO_SMALL not defined  */

    case ERROR_INVALID_DEVICE_OBJECT_PARAMETER: /* eg: SerCx2.sys' _purge() */
      return STATUS_INVALID_DEVICE_STATE;

    case ERROR_INVALID_HANDLE:
      return STATUS_INVALID_DEVICE_REQUEST;

    case ERROR_INVALID_PARAMETER:
      return STATUS_INVALID_PARAMETER;

    case ERROR_IO_DEVICE:
      return STATUS_IO_DEVICE_ERROR;

    case ERROR_IO_PENDING:
      return STATUS_PENDING;

    case ERROR_NOT_SUPPORTED:
      return STATUS_NOT_SUPPORTED;

    case ERROR_TIMEOUT:
      return STATUS_TIMEOUT;
    default:
      break;
  }

  WLog_Print(serial->log, WLOG_DEBUG, "unexpected last-error: 0x%08" PRIX32 "", GetLastError());
  return STATUS_UNSUCCESSFUL;
}

WINPR_ATTR_NODISCARD
static UINT serial_process_irp_create(SERIAL_DEVICE* serial, IRP* irp)
{
  DWORD DesiredAccess = 0;
  DWORD SharedAccess = 0;
  DWORD CreateDisposition = 0;
  UINT32 PathLength = 0;

  WINPR_ASSERT(serial);
  WINPR_ASSERT(irp);

  if (!Stream_CheckAndLogRequiredLengthWLog(serial->log, irp->input, 32))
    return ERROR_INVALID_DATA;

  Stream_Read_UINT32(irp->input, DesiredAccess);     /* DesiredAccess (4 bytes) */
  Stream_Seek_UINT64(irp->input);                    /* AllocationSize (8 bytes) */
  Stream_Seek_UINT32(irp->input);                    /* FileAttributes (4 bytes) */
  Stream_Read_UINT32(irp->input, SharedAccess);      /* SharedAccess (4 bytes) */
  Stream_Read_UINT32(irp->input, CreateDisposition); /* CreateDisposition (4 bytes) */
  Stream_Seek_UINT32(irp->input);                    /* CreateOptions (4 bytes) */
  Stream_Read_UINT32(irp->input, PathLength);        /* PathLength (4 bytes) */

  if (!Stream_SafeSeek(irp->input, PathLength)) /* Path (variable) */
    return ERROR_INVALID_DATA;

  WINPR_ASSERT(PathLength == 0); /* MS-RDPESP 2.2.2.2 */
#ifndef _WIN32
  /* Windows 2012 server sends on a first call :
   *     DesiredAccess     = 0x00100080: SYNCHRONIZE | FILE_READ_ATTRIBUTES
   *     SharedAccess      = 0x00000007: FILE_SHARE_DELETE | FILE_SHARE_WRITE | FILE_SHARE_READ
   *     CreateDisposition = 0x00000001: CREATE_NEW
   *
   * then Windows 2012 sends :
   *     DesiredAccess     = 0x00120089: SYNCHRONIZE | READ_CONTROL | FILE_READ_ATTRIBUTES |
   * FILE_READ_EA | FILE_READ_DATA SharedAccess      = 0x00000007: FILE_SHARE_DELETE |
   * FILE_SHARE_WRITE | FILE_SHARE_READ CreateDisposition = 0x00000001: CREATE_NEW
   *
   * WINPR_ASSERT(DesiredAccess == (GENERIC_READ | GENERIC_WRITE));
   * WINPR_ASSERT(SharedAccess == 0);
   * WINPR_ASSERT(CreateDisposition == OPEN_EXISTING);
   *
   */
  WLog_Print(serial->log, WLOG_DEBUG,
             "DesiredAccess: 0x%" PRIX32 ", SharedAccess: 0x%" PRIX32
             ", CreateDisposition: 0x%" PRIX32 "",
             DesiredAccess, SharedAccess, CreateDisposition);
  /* FIXME: As of today only the flags below are supported by CommCreateFileA: */
  DesiredAccess = GENERIC_READ | GENERIC_WRITE;
  SharedAccess = 0;
  CreateDisposition = OPEN_EXISTING;
#endif
  if (serial->hComm)
  {
    WLog_Print(serial->log, WLOG_ERROR, "Device %s already open, cancel request",
               serial->device.name);
    return ERROR_INVALID_DATA;
  }

  serial->hComm = winpr_CreateFile(serial->device.name, DesiredAccess, SharedAccess,
                                   nullptr,              /* SecurityAttributes */
                                   CreateDisposition, 0, /* FlagsAndAttributes */
                                   nullptr);             /* TemplateFile */

  if (!serial->hComm || (serial->hComm == INVALID_HANDLE_VALUE))
  {
    WLog_Print(serial->log, WLOG_WARN, "CreateFile failure: %s last-error: 0x%08" PRIX32 "",
               serial->device.name, GetLastError());
    irp->IoStatus = STATUS_UNSUCCESSFUL;
    goto error_handle;
  }

  _comm_setServerSerialDriver(serial->hComm, serial->ServerSerialDriverId);
  _comm_set_permissive(serial->hComm, serial->permissive);
  /* NOTE: binary mode/raw mode required for the redirection. On
   * Linux, CommCreateFileA forces this setting.
   */
  /* ZeroMemory(&dcb, sizeof(DCB)); */
  /* dcb.DCBlength = sizeof(DCB); */
  /* GetCommState(serial->hComm, &dcb); */
  /* dcb.fBinary = TRUE; */
  /* SetCommState(serial->hComm, &dcb); */
  WINPR_ASSERT(irp->FileId == 0);
  irp->FileId = irp->devman->id_sequence++; /* FIXME: why not ((WINPR_COMM*)hComm)->fd? */
  irp->IoStatus = STATUS_SUCCESS;
  WLog_Print(serial->log, WLOG_DEBUG, "%s (DeviceId: %" PRIu32 ", FileId: %" PRIu32 ") created.",
             serial->device.name, irp->device->id, irp->FileId);

  {
    DWORD BytesReturned = 0;
    if (!CommDeviceIoControl(serial->hComm, IOCTL_SERIAL_RESET_DEVICE, nullptr, 0, nullptr, 0,
                             &BytesReturned, nullptr))
      goto error_handle;
  }

error_handle:
  Stream_Write_UINT32(irp->output, irp->FileId); /* FileId (4 bytes) */
  Stream_Write_UINT8(irp->output, 0);            /* Information (1 byte) */
  return CHANNEL_RC_OK;
}

static UINT serial_process_irp_close(SERIAL_DEVICE* serial, IRP* irp)
{
  WINPR_ASSERT(serial);
  WINPR_ASSERT(irp);

  if (!Stream_CheckAndLogRequiredLengthWLog(serial->log, irp->input, 32))
    return ERROR_INVALID_DATA;

  Stream_Seek(irp->input, 32); /* Padding (32 bytes) */

  if (!serial->hComm)
  {
    WLog_Print(serial->log, WLOG_ERROR, "serial device %s is not open, aborting close",
               serial->device.name);
    return ERROR_INVALID_DATA;
  }

  close_terminated_irp_thread_handles(serial, TRUE);

  if (!CloseHandle(serial->hComm))
  {
    WLog_Print(serial->log, WLOG_WARN, "CloseHandle failure: %s (%" PRIu32 ") closed.",
               serial->device.name, irp->device->id);
    irp->IoStatus = STATUS_UNSUCCESSFUL;
    goto error_handle;
  }

  WLog_Print(serial->log, WLOG_DEBUG, "%s (DeviceId: %" PRIu32 ", FileId: %" PRIu32 ") closed.",
             serial->device.name, irp->device->id, irp->FileId);
  irp->IoStatus = STATUS_SUCCESS;
error_handle:
  serial->hComm = nullptr;
  Stream_Zero(irp->output, 5); /* Padding (5 bytes) */
  return CHANNEL_RC_OK;
}

/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
WINPR_ATTR_NODISCARD
static UINT serial_process_irp_read(SERIAL_DEVICE* serial, IRP* irp)
{
  UINT32 Length = 0;
  UINT64 Offset = 0;
  DWORD nbRead = 0;

  WINPR_ASSERT(serial);
  WINPR_ASSERT(irp);

  if (!Stream_CheckAndLogRequiredLengthWLog(serial->log, irp->input, 32))
    return ERROR_INVALID_DATA;

  Stream_Read_UINT32(irp->input, Length); /* Length (4 bytes) */
  Stream_Read_UINT64(irp->input, Offset); /* Offset (8 bytes) */
  (void)Offset;                /* [MS-RDPESP] 3.2.5.1.4 Processing a Server Read Request Message
                                * ignored */
  Stream_Seek(irp->input, 20); /* Padding (20 bytes) */

  if (!serial->hComm)
  {
    WLog_Print(serial->log, WLOG_ERROR, "serial device %s is not open, aborting read",
               serial->device.name);
    return ERROR_INVALID_DATA;
  }

  BYTE* buffer = (BYTE*)calloc(Length, sizeof(BYTE));

  if (buffer == nullptr)
  {
    irp->IoStatus = STATUS_NO_MEMORY;
    goto error_handle;
  }

  /* MS-RDPESP 3.2.5.1.4: If the Offset field is not set to 0, the value MUST be ignored
   * WINPR_ASSERT(Offset == 0);
   */
  WLog_Print(serial->log, WLOG_DEBUG, "reading %" PRIu32 " bytes from %s", Length,
             serial->device.name);

  /* FIXME: CommReadFile to be replaced by ReadFile */
  if (CommReadFile(serial->hComm, buffer, Length, &nbRead, nullptr))
  {
    irp->IoStatus = STATUS_SUCCESS;
  }
  else
  {
    WLog_Print(serial->log, WLOG_DEBUG,
               "read failure to %s, nbRead=%" PRIu32 ", last-error: 0x%08" PRIX32 "",
               serial->device.name, nbRead, GetLastError());
    irp->IoStatus = GetLastErrorToIoStatus(serial);
  }

  WLog_Print(serial->log, WLOG_DEBUG, "%" PRIu32 " bytes read from %s", nbRead,
             serial->device.name);
error_handle:
  Stream_Write_UINT32(irp->output, nbRead); /* Length (4 bytes) */

  if (nbRead > 0)
  {
    if (!Stream_EnsureRemainingCapacity(irp->output, nbRead))
    {
      WLog_Print(serial->log, WLOG_ERROR, "Stream_EnsureRemainingCapacity failed!");
      free(buffer);
      return CHANNEL_RC_NO_MEMORY;
    }

    Stream_Write(irp->output, buffer, nbRead); /* ReadData */
  }

  free(buffer);
  return CHANNEL_RC_OK;
}

WINPR_ATTR_NODISCARD
static UINT serial_process_irp_write(SERIAL_DEVICE* serial, IRP* irp)
{
  UINT32 Length = 0;
  UINT64 Offset = 0;
  DWORD nbWritten = 0;

  WINPR_ASSERT(serial);
  WINPR_ASSERT(irp);

  if (!Stream_CheckAndLogRequiredLengthWLog(serial->log, irp->input, 32))
    return ERROR_INVALID_DATA;

  Stream_Read_UINT32(irp->input, Length); /* Length (4 bytes) */
  Stream_Read_UINT64(irp->input, Offset); /* Offset (8 bytes) */
  (void)Offset; /* [MS-RDPESP] 3.2.5.1.4 Processing a Server Read Request Message
                 * ignored */
  if (!Stream_SafeSeek(irp->input, 20)) /* Padding (20 bytes) */
    return ERROR_INVALID_DATA;

  /* MS-RDPESP 3.2.5.1.5: The Offset field is ignored
   * WINPR_ASSERT(Offset == 0);
   *
   * Using a serial printer, noticed though this field could be
   * set.
   */
  WLog_Print(serial->log, WLOG_DEBUG, "writing %" PRIu32 " bytes to %s", Length,
             serial->device.name);

  const void* ptr = Stream_ConstPointer(irp->input);
  if (!Stream_SafeSeek(irp->input, Length))
    return ERROR_INVALID_DATA;

  if (!serial->hComm)
  {
    WLog_Print(serial->log, WLOG_ERROR, "serial device %s is not open, aborting write",
               serial->device.name);
    return ERROR_INVALID_DATA;
  }

  /* FIXME: CommWriteFile to be replaced by WriteFile */
  if (CommWriteFile(serial->hComm, ptr, Length, &nbWritten, nullptr))
  {
    irp->IoStatus = STATUS_SUCCESS;
  }
  else
  {
    WLog_Print(serial->log, WLOG_DEBUG,
               "write failure to %s, nbWritten=%" PRIu32 ", last-error: 0x%08" PRIX32 "",
               serial->device.name, nbWritten, GetLastError());
    irp->IoStatus = GetLastErrorToIoStatus(serial);
  }

  WLog_Print(serial->log, WLOG_DEBUG, "%" PRIu32 " bytes written to %s", nbWritten,
             serial->device.name);
  Stream_Write_UINT32(irp->output, nbWritten); /* Length (4 bytes) */
  Stream_Write_UINT8(irp->output, 0);          /* Padding (1 byte) */
  return CHANNEL_RC_OK;
}

/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
WINPR_ATTR_NODISCARD
static UINT serial_process_irp_device_control(SERIAL_DEVICE* serial, IRP* irp)
{
  DWORD BytesReturned = 0;

  WINPR_ASSERT(serial);
  WINPR_ASSERT(irp);

  if (!Stream_CheckAndLogRequiredLengthWLog(serial->log, irp->input, 32))
    return ERROR_INVALID_DATA;

  const UINT32 OutputBufferLength =
      Stream_Get_UINT32(irp->input); /* OutputBufferLength (4 bytes) */
  const UINT32 InputBufferLength =
      Stream_Get_UINT32(irp->input);                          /* InputBufferLength (4 bytes) */
  const UINT32 IoControlCode = Stream_Get_UINT32(irp->input); /* IoControlCode (4 bytes) */
  Stream_Seek(irp->input, 20);                        /* Padding (20 bytes) */

  if (!Stream_CheckAndLogRequiredLengthWLog(serial->log, irp->input, InputBufferLength))
    return ERROR_INVALID_DATA;

  if (!serial->hComm)
  {
    WLog_Print(serial->log, WLOG_ERROR,
               "serial device %s is not open, aborting device IO control", serial->device.name);
    return ERROR_INVALID_DATA;
  }

  const BYTE* InputBuffer = Stream_PointerAs(irp->input, BYTE);
  if (!Stream_SafeSeek(irp->input, InputBufferLength))
    return ERROR_INVALID_DATA;

  WLog_Print(serial->log, WLOG_DEBUG,
             "CommDeviceIoControl: CompletionId=%" PRIu32 ", IoControlCode=[0x%" PRIX32 "] %s",
             irp->CompletionId, IoControlCode, _comm_serial_ioctl_name(IoControlCode));

  BYTE* OutputBuffer = nullptr;
  if (OutputBufferLength > 0)
  {
    OutputBuffer = (BYTE*)calloc(OutputBufferLength, sizeof(BYTE));
    if (!OutputBuffer)
    {
      irp->IoStatus = STATUS_NO_MEMORY;
      goto error_handle;
    }
  }

  /* FIXME: CommDeviceIoControl to be replaced by DeviceIoControl() */
  if (CommDeviceIoControl(serial->hComm, IoControlCode, InputBuffer, InputBufferLength,
                          OutputBuffer, OutputBufferLength, &BytesReturned, nullptr))
  {
    /* WLog_Print(serial->log, WLOG_DEBUG, "CommDeviceIoControl: CompletionId=%"PRIu32",
     * IoControlCode=[0x%"PRIX32"] %s done", irp->CompletionId, IoControlCode,
     * _comm_serial_ioctl_name(IoControlCode)); */
    irp->IoStatus = STATUS_SUCCESS;
  }
  else
  {
    WLog_Print(serial->log, WLOG_DEBUG,
               "CommDeviceIoControl failure: IoControlCode=[0x%" PRIX32
               "] %s, last-error: 0x%08" PRIX32 "",
               IoControlCode, _comm_serial_ioctl_name(IoControlCode), GetLastError());
    irp->IoStatus = GetLastErrorToIoStatus(serial);
    BytesReturned = 0;
  }

error_handle:
  Stream_Write_UINT32(irp->output, BytesReturned); /* OutputBufferLength (4 bytes) */

  if (BytesReturned > 0)
  {
    if (!Stream_EnsureRemainingCapacity(irp->output, BytesReturned))
    {
      WLog_Print(serial->log, WLOG_ERROR, "Stream_EnsureRemainingCapacity failed!");
      free(OutputBuffer);
      return CHANNEL_RC_NO_MEMORY;
    }

    Stream_Write(irp->output, OutputBuffer, BytesReturned); /* OutputBuffer */
  }

  /* FIXME: Why at least Windows 2008R2 gets lost with this
   * extra byte and likely on a IOCTL_SERIAL_SET_BAUD_RATE? The
   * extra byte is well required according MS-RDPEFS
   * 2.2.1.5.5 */
  /* else */
  /* { */
  /*  Stream_Write_UINT8(irp->output, 0); /\* Padding (1 byte) *\/ */
  /* } */
  free(OutputBuffer);
  return CHANNEL_RC_OK;
}

/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
static UINT serial_process_irp(SERIAL_DEVICE* serial, IRP* irp)
{
  UINT error = CHANNEL_RC_OK;

  WINPR_ASSERT(serial);
  WINPR_ASSERT(irp);

  WLog_Print(serial->log, WLOG_DEBUG, "IRP MajorFunction: %s, MinorFunction: 0x%08" PRIX32 "\n",
             rdpdr_irp_string(irp->MajorFunction), irp->MinorFunction);

  switch (irp->MajorFunction)
  {
    case IRP_MJ_CREATE:
      error = serial_process_irp_create(serial, irp);
      break;

    case IRP_MJ_CLOSE:
      error = serial_process_irp_close(serial, irp);
      break;

    case IRP_MJ_READ:
      error = serial_process_irp_read(serial, irp);
      break;

    case IRP_MJ_WRITE:
      error = serial_process_irp_write(serial, irp);
      break;

    case IRP_MJ_DEVICE_CONTROL:
      error = serial_process_irp_device_control(serial, irp);
      break;

    default:
      irp->IoStatus = STATUS_NOT_SUPPORTED;
      break;
  }

  DWORD level = WLOG_TRACE;
  if (error)
    level = WLOG_WARN;

  WLog_Print(serial->log, level,
             "[%s|0x%08" PRIx32 "] completed with %s [0x%08" PRIx32 "] (IoStatus %s [0x%08" PRIx32
             "])",
             rdpdr_irp_string(irp->MajorFunction), irp->MajorFunction, WTSErrorToString(error),
             error, NtStatus2Tag(irp->IoStatus), WINPR_CXX_COMPAT_CAST(UINT32, irp->IoStatus));

  return error;
}

static DWORD WINAPI irp_thread_func(LPVOID arg)
{
  IRP_THREAD_DATA* data = (IRP_THREAD_DATA*)arg;

  WINPR_ASSERT(data);
  WINPR_ASSERT(data->serial);
  WINPR_ASSERT(data->irp);

  /* blocks until the end of the request */
  UINT error = serial_process_irp(data->serial, data->irp);
  if (error)
  {
    WLog_Print(data->serial->log, WLOG_ERROR,
               "serial_process_irp failed with error %" PRIu32 "", error);
    data->irp->Discard(data->irp);
    goto error_out;
  }

  EnterCriticalSection(&data->serial->TerminatingIrpThreadsLock);
  WINPR_ASSERT(data->irp->Complete);
  error = data->irp->Complete(data->irp);
  LeaveCriticalSection(&data->serial->TerminatingIrpThreadsLock);
error_out:

  if (error && data->serial->rdpcontext)
    setChannelError(data->serial->rdpcontext, error, "irp_thread_func reported an error");

  /* NB: At this point, the server might already being reusing
   * the CompletionId whereas the thread is not yet
   * terminated */
  free(data);
  ExitThread(error);
  return error;
}

static void close_unterminated_irp_thread(wListDictionary* list, wLog* log, ULONG_PTR id)
{
  WINPR_ASSERT(list);
  HANDLE self = _GetCurrentThread();
  HANDLE cirpThread = ListDictionary_GetItemValue(list, (void*)id);
  if (self == cirpThread)
    WLog_Print(log, WLOG_DEBUG, "Skipping termination of own IRP thread");
  else
    ListDictionary_Remove(list, (void*)id);
}

static void close_terminated_irp_thread(wListDictionary* list, wLog* log, ULONG_PTR id)
{
  WINPR_ASSERT(list);

  HANDLE cirpThread = ListDictionary_GetItemValue(list, (void*)id);
  /* FIXME: not quite sure a zero timeout is a good thing to check whether a thread is
   * still alive or not */
  const DWORD waitResult = WaitForSingleObject(cirpThread, 0);

  if (waitResult == WAIT_OBJECT_0)
    ListDictionary_Remove(list, (void*)id);
  else if (waitResult != WAIT_TIMEOUT)
  {
    /* unexpected thread state */
    WLog_Print(log, WLOG_WARN, "WaitForSingleObject, got an unexpected result=0x%" PRIX32 "\n",
               waitResult);
  }
}

void close_terminated_irp_thread_handles(SERIAL_DEVICE* serial, BOOL forceClose)
{
  WINPR_ASSERT(serial);

  EnterCriticalSection(&serial->TerminatingIrpThreadsLock);

  ListDictionary_Lock(serial->IrpThreads);
  ULONG_PTR* ids = nullptr;
  const size_t nbIds = ListDictionary_GetKeys(serial->IrpThreads, &ids);

  for (size_t i = 0; i < nbIds; i++)
  {
    ULONG_PTR id = ids[i];
    if (forceClose)
      close_unterminated_irp_thread(serial->IrpThreads, serial->log, id);
    else
      close_terminated_irp_thread(serial->IrpThreads, serial->log, id);
  }

  free(ids);
  ListDictionary_Unlock(serial->IrpThreads);

  LeaveCriticalSection(&serial->TerminatingIrpThreadsLock);
}

static void create_irp_thread(SERIAL_DEVICE* serial, IRP* irp)
{
  IRP_THREAD_DATA* data = nullptr;
  HANDLE irpThread = nullptr;
  HANDLE previousIrpThread = nullptr;
  uintptr_t key = 0;

  WINPR_ASSERT(serial);
  WINPR_ASSERT(irp);

  close_terminated_irp_thread_handles(serial, FALSE);

  /* NB: At this point and thanks to the synchronization we're
   * sure that the incoming IRP uses well a recycled
   * CompletionId or the server sent again an IRP already posted
   * which didn't get yet a response (this later server behavior
   * at least observed with IOCTL_SERIAL_WAIT_ON_MASK and
   * mstsc.exe).
   *
   * FIXME: behavior documented somewhere? behavior not yet
   * observed with FreeRDP).
   */
  key = irp->CompletionId + 1ull;

  ListDictionary_Lock(serial->IrpThreads);
  previousIrpThread = ListDictionary_GetItemValue(serial->IrpThreads, (void*)key);
  ListDictionary_Unlock(serial->IrpThreads);

  if (previousIrpThread)
  {
    /* Thread still alived <=> Request still pending */
    WLog_Print(serial->log, WLOG_DEBUG,
               "IRP recall: IRP with the CompletionId=%" PRIu32 " not yet completed!",
               irp->CompletionId);
    WINPR_ASSERT(FALSE); /* unimplemented */
    /* TODO: WINPR_ASSERTs that previousIrpThread handles well
     * the same request by checking more details. Need an
     * access to the IRP object used by previousIrpThread
     */
    /* TODO: taking over the pending IRP or sending a kind
     * of wake up signal to accelerate the pending
     * request
     *
     * To be considered:
     *   if (IoControlCode == IOCTL_SERIAL_WAIT_ON_MASK) {
     *       pComm->PendingEvents |= SERIAL_EV_FREERDP_*;
     *   }
     */
    irp->Discard(irp);
    return;
  }

  /* error_handle to be used ... */
  data = (IRP_THREAD_DATA*)calloc(1, sizeof(IRP_THREAD_DATA));

  if (data == nullptr)
  {
    WLog_Print(serial->log, WLOG_WARN, "Could not allocate a new IRP_THREAD_DATA.");
    goto error_handle;
  }

  data->serial = serial;
  data->irp = irp;
  /* data freed by irp_thread_func */
  irpThread = CreateThread(nullptr, 0, irp_thread_func, (void*)data, CREATE_SUSPENDED, nullptr);

  if (irpThread == INVALID_HANDLE_VALUE)
  {
    WLog_Print(serial->log, WLOG_WARN, "Could not allocate a new IRP thread.");
    goto error_handle;
  }

  key = irp->CompletionId + 1ull;

  ListDictionary_Lock(serial->IrpThreads);
  if (ListDictionary_Count(serial->IrpThreads) >= MAX_IRP_THREADS)
  {
    WLog_Print(serial->log, WLOG_WARN,
               "Number of IRP threads threshold reached: %" PRIuz ", keep on anyway",
               ListDictionary_Count(serial->IrpThreads));
    WINPR_ASSERT(FALSE); /* unimplemented */
                         /* TODO: MAX_IRP_THREADS has been thought to avoid a
                          * flooding of pending requests. Use
                          * WaitForMultipleObjects() when available in winpr
                          * for threads.
                          */
  }

  {
    const BOOL added = ListDictionary_Add(serial->IrpThreads, (void*)key, irpThread);
    ListDictionary_Unlock(serial->IrpThreads);

    if (!added)
    {
      WLog_Print(serial->log, WLOG_ERROR, "ListDictionary_Add failed!");
      goto error_handle;
    }
  }

  ResumeThread(irpThread);

  return;
error_handle:
  if (irpThread)
    (void)CloseHandle(irpThread);
  irp->IoStatus = STATUS_NO_MEMORY;
  WINPR_ASSERT(irp->Complete);
  const UINT rc = irp->Complete(irp);
  if (rc != CHANNEL_RC_OK)
    WLog_Print(serial->log, WLOG_WARN, "irp->Complete failed with %" PRIu32, rc);
  free(data);
}

static DWORD WINAPI serial_thread_func(LPVOID arg)
{
  IRP* irp = nullptr;
  wMessage message = WINPR_C_ARRAY_INIT;
  SERIAL_DEVICE* serial = (SERIAL_DEVICE*)arg;
  UINT error = CHANNEL_RC_OK;

  WINPR_ASSERT(serial);

  while (1)
  {
    if (!MessageQueue_Wait(serial->MainIrpQueue))
    {
      WLog_Print(serial->log, WLOG_ERROR, "MessageQueue_Wait failed!");
      error = ERROR_INTERNAL_ERROR;
      break;
    }

    if (!MessageQueue_Peek(serial->MainIrpQueue, &message, TRUE))
    {
      WLog_Print(serial->log, WLOG_ERROR, "MessageQueue_Peek failed!");
      error = ERROR_INTERNAL_ERROR;
      break;
    }

    if (message.id == WMQ_QUIT)
      break;

    irp = (IRP*)message.wParam;

    if (irp)
      create_irp_thread(serial, irp);
  }

  ListDictionary_Lock(serial->IrpThreads);
  ListDictionary_Clear(serial->IrpThreads);
  ListDictionary_Unlock(serial->IrpThreads);

  if (error && serial->rdpcontext)
    setChannelError(serial->rdpcontext, error, "serial_thread_func reported an error");

  ExitThread(error);
  return error;
}

/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
static UINT serial_irp_request(DEVICE* device, IRP* irp)
{
  SERIAL_DEVICE* serial = (SERIAL_DEVICE*)device;
  WINPR_ASSERT(irp != nullptr);
  WINPR_ASSERT(serial);

  /* NB: ENABLE_ASYNCIO is set, (MS-RDPEFS 2.2.2.7.2) this
   * allows the server to send multiple simultaneous read or
   * write requests.
   */

  if (!MessageQueue_Post(serial->MainIrpQueue, nullptr, 0, (void*)irp, nullptr))
  {
    WLog_Print(serial->log, WLOG_ERROR, "MessageQueue_Post failed!");
    irp->Discard(irp);
    return ERROR_INTERNAL_ERROR;
  }

  return CHANNEL_RC_OK;
}

/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
static UINT serial_free(DEVICE* device)
{
  UINT error = 0;
  SERIAL_DEVICE* serial = (SERIAL_DEVICE*)device;
  if (!serial)
    return CHANNEL_RC_OK;

  WLog_Print(serial->log, WLOG_DEBUG, "freeing");
  if (serial->MainIrpQueue)
    MessageQueue_PostQuit(serial->MainIrpQueue, 0);

  if (serial->MainThread)
  {
    if (WaitForSingleObject(serial->MainThread, INFINITE) == WAIT_FAILED)
    {
      error = GetLastError();
      WLog_Print(serial->log, WLOG_ERROR,
                 "WaitForSingleObject failed with error %" PRIu32 "!", error);
    }
    (void)CloseHandle(serial->MainThread);
  }

  if (serial->hComm)
    (void)CloseHandle(serial->hComm);

  /* Clean up resources */
  Stream_Free(serial->device.data, TRUE);
  MessageQueue_Free(serial->MainIrpQueue);
  ListDictionary_Free(serial->IrpThreads);
  DeleteCriticalSection(&serial->TerminatingIrpThreadsLock);
  free(serial);
  return CHANNEL_RC_OK;
}

static void serial_message_free(void* obj)
{
  wMessage* msg = obj;
  if (!msg)
    return;
  if (msg->id != 0)
    return;

  IRP* irp = (IRP*)msg->wParam;
  if (!irp)
    return;
  WINPR_ASSERT(irp->Discard);
  irp->Discard(irp);
}

static void irp_thread_close(void* arg)
{
  HANDLE hdl = arg;
  if (hdl)
  {
    HANDLE thz = _GetCurrentThread();
    if (thz == hdl)
      WLog_WARN(TAG, "closing self, ignoring...");
    else
    {
      (void)TerminateThread(hdl, 0);
      (void)WaitForSingleObject(hdl, INFINITE);
      (void)CloseHandle(hdl);
    }
  }
}

/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
FREERDP_ENTRY_POINT(
    UINT VCAPITYPE serial_DeviceServiceEntry(PDEVICE_SERVICE_ENTRY_POINTS pEntryPoints))
{
  size_t len = 0;
  SERIAL_DEVICE* serial = nullptr;
  UINT error = CHANNEL_RC_OK;

  WINPR_ASSERT(pEntryPoints);

  RDPDR_SERIAL* device = (RDPDR_SERIAL*)pEntryPoints->device;
  WINPR_ASSERT(device);

  wLog* log = WLog_Get(TAG);
  const char* name = device->device.Name;
  const char* path = device->Path;
  const char* driver = device->Driver;

  if (!name || (name[0] == '*'))
  {
    /* TODO: implement auto detection of serial ports */
    WLog_Print(log, WLOG_WARN,
               "Serial port autodetection not implemented, nothing will be redirected!");
    return CHANNEL_RC_OK;
  }

  if ((name && name[0]) && (path && path[0]))
  {
    WLog_Print(log, WLOG_DEBUG, "Defining %s as %s", name, path);

    if (!DefineCommDevice(name /* eg: COM1 */, path /* eg: /dev/ttyS0 */))
    {
      DWORD status = GetLastError();
      WLog_Print(log, WLOG_ERROR, "DefineCommDevice failed with %08" PRIx32, status);
      return ERROR_INTERNAL_ERROR;
    }

    serial = (SERIAL_DEVICE*)calloc(1, sizeof(SERIAL_DEVICE));

    if (!serial)
    {
      WLog_Print(log, WLOG_ERROR, "calloc failed!");
      return CHANNEL_RC_NO_MEMORY;
    }

    serial->log = log;
    serial->device.type = RDPDR_DTYP_SERIAL;
    serial->device.name = name;
    serial->device.IRPRequest = serial_irp_request;
    serial->device.Free = serial_free;
    serial->rdpcontext = pEntryPoints->rdpcontext;
    len = strlen(name);
    serial->device.data = Stream_New(nullptr, len + 1);

    if (!serial->device.data)
    {
      WLog_Print(serial->log, WLOG_ERROR, "calloc failed!");
      error = CHANNEL_RC_NO_MEMORY;
      goto error_out;
    }

    for (size_t i = 0; i <= len; i++)
      Stream_Write_INT8(serial->device.data, name[i] < 0 ? '_' : name[i]);

    if (driver != nullptr)
    {
      if (_stricmp(driver, "Serial") == 0)
        serial->ServerSerialDriverId = SerialDriverSerialSys;
      else if (_stricmp(driver, "SerCx") == 0)
        serial->ServerSerialDriverId = SerialDriverSerCxSys;
      else if (_stricmp(driver, "SerCx2") == 0)
        serial->ServerSerialDriverId = SerialDriverSerCx2Sys;
      else
      {
        WLog_Print(serial->log, WLOG_WARN, "Unknown server's serial driver: %s.", driver);
        WLog_Print(serial->log, WLOG_WARN,
                   "Valid options are: 'Serial' (default), 'SerCx' and 'SerCx2'");
        goto error_out;
      }
    }
    else
    {
      /* default driver */
      serial->ServerSerialDriverId = SerialDriverSerialSys;
    }

    if (device->Permissive != nullptr)
    {
      if (_stricmp(device->Permissive, "permissive") == 0)
      {
        serial->permissive = TRUE;
      }
      else
      {
        WLog_Print(serial->log, WLOG_WARN, "Unknown flag: %s", device->Permissive);
        goto error_out;
      }
    }

    WLog_Print(serial->log, WLOG_DEBUG, "Server's serial driver: %s (id: %u)", driver,
               serial->ServerSerialDriverId);

    serial->MainIrpQueue = MessageQueue_New(nullptr);

    if (!serial->MainIrpQueue)
    {
      WLog_Print(serial->log, WLOG_ERROR, "MessageQueue_New failed!");
      error = CHANNEL_RC_NO_MEMORY;
      goto error_out;
    }

    {
      wObject* obj = MessageQueue_Object(serial->MainIrpQueue);
      WINPR_ASSERT(obj);
      obj->fnObjectFree = serial_message_free;
    }

    /* IrpThreads content only modified by create_irp_thread() */
    serial->IrpThreads = ListDictionary_New(FALSE);

    if (!serial->IrpThreads)
    {
      WLog_Print(serial->log, WLOG_ERROR, "ListDictionary_New failed!");
      error = CHANNEL_RC_NO_MEMORY;
      goto error_out;
    }

    {
      wObject* obj = ListDictionary_ValueObject(serial->IrpThreads);
      WINPR_ASSERT(obj);
      obj->fnObjectFree = irp_thread_close;
    }

    InitializeCriticalSection(&serial->TerminatingIrpThreadsLock);

    error = pEntryPoints->RegisterDevice(pEntryPoints->devman, &serial->device);
    if (error != CHANNEL_RC_OK)
    {
      WLog_Print(serial->log, WLOG_ERROR,
                 "EntryPoints->RegisterDevice failed with error %" PRIu32 "!", error);
      goto error_out;
    }

    serial->MainThread = CreateThread(nullptr, 0, serial_thread_func, serial, 0, nullptr);
    if (!serial->MainThread)
    {
      WLog_Print(serial->log, WLOG_ERROR, "CreateThread failed!");
      error = ERROR_INTERNAL_ERROR;
      goto error_out;
    }
  }

  return error;
error_out:
  if (serial)
    serial_free(&serial->device);
  return error;
}

Coverage Report

Created: 2026-10-15 06:30