/src/ghostpdl/devices/vector/gdevxps.c

Source
/* Copyright (C) 2001-2025 Artifex Software, Inc.
   All Rights Reserved.

   This software is provided AS-IS with no warranty, either express or
   implied.

   This software is distributed under license and may not be copied,
   modified or distributed except as expressly authorized under the terms
   of the license contained in the file LICENSE in this distribution.

   Refer to licensing information at http://www.artifex.com or contact
   Artifex Software, Inc.,  39 Mesa Street, Suite 108A, San Francisco,
   CA 94129, USA, for further information.
*/

/* XPS output device */
#include "string_.h"
#include "stdio_.h"
#include "zlib.h"
#include "gx.h"
#include "gserrors.h"
#include "gdevvec.h"
#include "gxpath.h"
#include "gzcpath.h"
#include "stream.h"
#include "stdint_.h"
#include "gdevtifs.h"
#include "gsicc_create.h"
#include "gsicc_cache.h"
#include "gximdecode.h" /* Need so that we can unpack and decode */
#include "gxpaint.h"

#define MAXPRINTERNAME 64

#define MAXNAME 64
#define PROFILEPATH "Documents/1/Resources/Profiles/"
#define IMAGEPATH "Documents/1/Resources/Images/"

/* default resolution. */
#ifndef X_DPI
#  define X_DPI 96
#endif
#ifndef Y_DPI
#  define Y_DPI 96
#endif

/* default constants */
#define XPS_DEFAULT_LINEWIDTH   1.0
#define XPS_DEFAULT_LINECAP     gs_cap_butt
#define XPS_DEFAULT_LINEJOIN    gs_join_miter
#define XPS_DEFAULT_MITERLIMIT  4.0

/* ---------------- Device definition ---------------- */

/* TODO graphics state definitions are not yet used */

/* xps join and cap values. */
static const char *join_str[] = {"Miter", "Bevel", "Round"};
static const char *cap_str[]  = {"Flat",  "Round", "Square", "Triangle"};

typedef enum {XPS_JOIN, XPS_START_CAP, XPS_END_CAP, XPS_THICK, XPS_MITER_LIMIT,
              XPS_STROKE_COLOR, XPS_FILL_COLOR} xps_attr_t;

typedef struct gx_device_xps_vals {
    double f;
    uint64_t i;
} val_t;

/* current and default values of state atrributes */
typedef struct gx_device_xps_attr_state {
    val_t cur;
    val_t def;
    const char *fmt;
    const char **vals;
} attr_t;

/* xps proto state - a copy of this table is made on the heap when the
   device is opened and the current state values are filled in at run
   time. NB not currently used. */
attr_t xps_fixed_state[] = {
     /* attribute           current  default         Format String            values */
    {/* XPS_JOIN */         {0.0, 0}, {0.0, 0},  "StrokeLineJoin=\"%s\"",     join_str},
    {/* XPS_START_CAP */    {0.0, 0}, {0.0, 0},  "StrokeStartLineCap=\"%s\"",  cap_str},
    {/* XPS_END_CAP */      {0.0, 0}, {0.0, 0},  "StrokeEndLineCap=\"%s\"",    cap_str},
    {/* XPS_THICK */        {0.0, 0}, {1.0, 0},  "StrokeThickness=\"%f\"",     NULL},
    {/* XPS_MITER_LIMIT */  {0.0, 0}, {10.0, 0}, "StrokeMiterLimit=\"%f\"",    NULL},
    {/* XPS_STROKE_COLOR */ {0.0, 0}, {0.0, 0},  "Stroke=\"%X\"",              NULL},
    {/* XPS_FILL_COLOR */   {0.0, 0}, {0.0, 0},  "Fill=\"%X\"",                NULL}
};

/* zip file management - a list of temporary files is maintained along
   with the final filename to be used in the archive.  filenames with
   associated contents in temporary files are maintained until the end
   of the job, at which time we enumerate the list and write the zip
   archive.  The exception to this is the image data and icc profiles.  Image
   data are stored in temp files and upon end image transferred to the zip
   archive and the temp file closed (and removed).  ICC profiles are written
   directly to the archive without a temp file. */

typedef struct gx_device_xps_zdata_s {
    gp_file *fp;
    ulong count;
} gx_device_xps_zdata_t;

/* Zip info for each file in the zip archive */
typedef struct gx_device_xps_zinfo_s {
    ulong CRC;
    ulong file_size;
    gx_device_xps_zdata_t data;
    long current_pos;
    ushort date;
    ushort time;
    bool saved;  /* flag to indicate file was already saved (e.g. image or profile) */
} gx_device_xps_zinfo_t;

/* a list of archive file names and their corresponding info
   (gx_device_xps_zinfo_t) */
typedef struct gx_device_xps_f2i_s {
    char *filename;
    gx_device_xps_zinfo_t *info;
    struct gx_device_xps_f2i_s *next;
    gs_memory_t *memory;
} gx_device_xps_f2i_t;

/* Used for keeping track of icc profiles that we have written.   This way we
   avoid writing the same one multiple times.  It would be nice to do this
   based upon the gs_id for images, but that id is really created after we
   have already drawn the path.  Not clear to me how to get a source ID. */
typedef struct xps_icc_data_s {
    int64_t hash;
    int index;
    struct xps_icc_data_s *next;
} xps_icc_data_t;

/* Add new page relationships to this linked list, avoiding duplicates.
   When page is closed write out all the relationships */
typedef struct xps_relations_s xps_relations_t;

struct xps_relations_s {
    char* relation;
    xps_relations_t *next;
    gs_memory_t *memory;
};

typedef enum {
    xps_solidbrush,
    xps_imagebrush,
    xps_visualbrush
} xps_brush_t;

typedef struct xps_image_enum_s {
    gdev_vector_image_enum_common;
    gs_matrix mat;
    TIFF *tif; /* in non-GC memory */
    char file_name[MAXNAME];
    char icc_name[MAXNAME];
    image_decode_t decode_st;
    int bytes_comp;
    byte *buffer; /* Needed for unpacking/decoding of image data */
    byte *devc_buffer; /* Needed for case where we are mapping to device colors */
    gs_color_space *pcs;     /* Needed for Sep, DeviceN, Indexed */
    gsicc_link_t *icc_link;  /* Needed for CIELAB */
    gp_file *fid;
} xps_image_enum_t;

static void
xps_image_enum_finalize(const gs_memory_t *cmem, void *vptr);

gs_private_st_suffix_add3_final(st_xps_image_enum, xps_image_enum_t,
    "xps_image_enum_t", xps_image_enum_enum_ptrs,
    xps_image_enum_reloc_ptrs, xps_image_enum_finalize, st_vector_image_enum,
    buffer, devc_buffer, pcs);

typedef struct gx_device_xps_s {
    /* superclass state */
    gx_device_vector_common;
    /* zip container bookkeeping */
    gx_device_xps_f2i_t *f2i;
    gx_device_xps_f2i_t *f2i_tail;
    /* local state */
    int page_count;     /* how many output_page calls we've seen */
    int image_count;    /* number of images so far */
    xps_relations_t *relations_head;
    xps_relations_t *relations_tail;
    xps_icc_data_t *icc_data;
    gx_color_index strokecolor, fillcolor;
    xps_brush_t stroketype, filltype;
    xps_image_enum_t *xps_pie;
    double linewidth;
    gs_line_cap linecap;
    gs_line_join linejoin;
    double miterlimit;
    bool can_stroke;
    unsigned char PrinterName[MAXPRINTERNAME];
    bool in_path;
    bool in_clip;
    bool clip_written;
    bool rect_written;
} gx_device_xps;

gs_public_st_suffix_add1_final(st_device_xps, gx_device_xps,
    "gx_device_xps", device_xps_enum_ptrs, device_xps_reloc_ptrs,
    gx_device_finalize, st_device_vector, xps_pie);

#define xps_device_body(dname, depth, init)\
  std_device_dci_type_body(gx_device_xps, init, dname, &st_device_xps, \
                           DEFAULT_WIDTH_10THS * X_DPI / 10, \
                           DEFAULT_HEIGHT_10THS * Y_DPI / 10, \
                           X_DPI, Y_DPI, \
                           (depth > 8 ? 3 : 1), depth, \
                           (depth > 1 ? 255 : 1), (depth > 8 ? 255 : 0), \
                           (depth > 1 ? 256 : 2), (depth > 8 ? 256 : 1))

static dev_proc_open_device(xps_open_device);
static dev_proc_output_page(xps_output_page);
static dev_proc_close_device(xps_close_device);
static dev_proc_get_params(xps_get_params);
static dev_proc_put_params(xps_put_params);
static dev_proc_fill_path(gdev_xps_fill_path);
static dev_proc_stroke_path(gdev_xps_stroke_path);
static dev_proc_initialize_device_procs(xps_initialize_device_procs);
static dev_proc_begin_typed_image(xps_begin_typed_image);

const gx_device_xps gs_xpswrite_device = {
    xps_device_body("xpswrite", 24, xps_initialize_device_procs),
};

static int
xps_initialize_device(gx_device *dev)
{
    gx_device_xps *xps = (gx_device_xps*)dev;

    memset(xps->PrinterName, 0x00, MAXPRINTERNAME);

    return 0;
}

static void
xps_initialize_device_procs(gx_device *dev)
{
    set_dev_proc(dev, initialize_device, xps_initialize_device);
    set_dev_proc(dev, open_device, xps_open_device);
    set_dev_proc(dev, output_page, xps_output_page);
    set_dev_proc(dev, close_device, xps_close_device);
    set_dev_proc(dev, map_rgb_color, gx_default_rgb_map_rgb_color);
    set_dev_proc(dev, map_color_rgb, gx_default_rgb_map_color_rgb);
    set_dev_proc(dev, fill_rectangle, gdev_vector_fill_rectangle);
    set_dev_proc(dev, get_params, xps_get_params);
    set_dev_proc(dev, put_params, xps_put_params);
    set_dev_proc(dev, get_page_device, gx_page_device_get_page_device);
    set_dev_proc(dev, fill_path, gdev_xps_fill_path);
    set_dev_proc(dev, stroke_path, gdev_xps_stroke_path);
    set_dev_proc(dev, begin_typed_image, xps_begin_typed_image);
}

/* Vector device procedures */
static int
xps_beginpage(gx_device_vector *vdev);
static int
xps_setlinewidth(gx_device_vector *vdev, double width);
static int
xps_setlinecap(gx_device_vector *vdev, gs_line_cap cap);
static int
xps_setlinejoin(gx_device_vector *vdev, gs_line_join join);
static int
xps_setmiterlimit(gx_device_vector *vdev, double limit);
static int
xps_setdash(gx_device_vector *vdev, const float *pattern,
            uint count, double offset);
static int
xps_setlogop(gx_device_vector *vdev, gs_logical_operation_t lop,
             gs_logical_operation_t diff);

static bool
xps_can_handle_hl_color(gx_device_vector *vdev, const gs_gstate *pgs,
                        const gx_drawing_color * pdc);
static int
xps_setfillcolor(gx_device_vector *vdev, const gs_gstate *pgs,
                 const gx_drawing_color *pdc);
static int
xps_setstrokecolor(gx_device_vector *vdev, const gs_gstate *pgs,
                   const gx_drawing_color *pdc);

static int
xps_dorect(gx_device_vector *vdev, fixed x0, fixed y0,
           fixed x1, fixed y1, gx_path_type_t type);
static int
xps_beginpath(gx_device_vector *vdev, gx_path_type_t type);

static int
xps_moveto(gx_device_vector *vdev, double x0, double y0,
           double x, double y, gx_path_type_t type);
static int
xps_lineto(gx_device_vector *vdev, double x0, double y0,
           double x, double y, gx_path_type_t type);
static int
xps_curveto(gx_device_vector *vdev, double x0, double y0,
            double x1, double y1, double x2, double y2,
            double x3, double y3, gx_path_type_t type);
static int
xps_closepath(gx_device_vector *vdev, double x, double y,
              double x_start, double y_start, gx_path_type_t type);
static int
xps_endpath(gx_device_vector *vdev, gx_path_type_t type);

/* Vector device function table */
static const gx_device_vector_procs xps_vector_procs = {
    xps_beginpage,
    xps_setlinewidth,
    xps_setlinecap,
    xps_setlinejoin,
    xps_setmiterlimit,
    xps_setdash,
    gdev_vector_setflat,
    xps_setlogop,
    xps_can_handle_hl_color,
    xps_setfillcolor,
    xps_setstrokecolor,
    gdev_vector_dopath,
    xps_dorect,
    xps_beginpath,
    xps_moveto,
    xps_lineto,
    xps_curveto,
    xps_closepath,
    xps_endpath
};

/* Various static content we use in all xps jobs.  We don't use all of
   these resource types */
static char *xps_content_types = (char *)"<?xml version=\"1.0\" encoding=\"utf-8\"?>"
    "<Types xmlns=\"http://schemas.openxmlformats.org/package/2006/content-types\">"
    "<Default Extension=\"fdseq\" ContentType=\"application/vnd.ms-package.xps-fixeddocumentsequence+xml\" />"
    "<Default Extension=\"rels\" ContentType=\"application/vnd.openxmlformats-package.relationships+xml\" />"
    "<Default Extension=\"fdoc\" ContentType=\"application/vnd.ms-package.xps-fixeddocument+xml\" />"
    "<Default Extension=\"fpage\" ContentType=\"application/vnd.ms-package.xps-fixedpage+xml\" />"
    "<Default Extension=\"ttf\" ContentType=\"application/vnd.ms-opentype\" />"
    "<Default Extension = \"icc\" ContentType = \"application/vnd.ms-color.iccprofile\" />"
    "<Default Extension=\"tif\" ContentType=\"image/tiff\" />"
    "<Default Extension=\"png\" ContentType=\"image/png\" /></Types>";

static char *fixed_document_sequence = (char *)"<?xml version=\"1.0\" encoding=\"utf-8\"?>"
    "<FixedDocumentSequence xmlns=\"http://schemas.microsoft.com/xps/2005/06\">"
    "<DocumentReference Source=\"Documents/1/FixedDocument.fdoc\" />"
    "</FixedDocumentSequence>";

static char *fixed_document_fdoc_header = (char *)"<?xml version=\"1.0\" encoding=\"utf-8\"?>"
    "<FixedDocument xmlns=\"http://schemas.microsoft.com/xps/2005/06\">";

static char *rels_header = (char *)"<?xml version=\"1.0\" encoding=\"utf-8\"?>\n"
    "<Relationships xmlns=\"http://schemas.openxmlformats.org/package/2006/relationships\">\n";

static char *rels_fdseq = (char *)"<Relationship Type=\"http://schemas.microsoft.com/xps/2005/06/fixedrepresentation\" "
    "Target=\"/FixedDocumentSequence.fdseq\" Id=\"Rdd12fb46c1de43ab\" />\n"
    "</Relationships>\n";

static char *rels_req_type = (char *) "\"http://schemas.microsoft.com/xps/2005/06/required-resource\"";

    /* Procedures to manage the containing zip archive */

/* Append a node of info for this archive file */
static int
zip_new_info_node(gx_device_xps *xps_dev, const char *filename)
{
    gx_device *dev = (gx_device *)xps_dev;
    gs_memory_t *mem = dev->memory;
    int lenstr;

    /* NB should use GC */
    gx_device_xps_zinfo_t *info =
        (gx_device_xps_zinfo_t *)gs_alloc_bytes(mem->non_gc_memory, sizeof(gx_device_xps_zinfo_t), "zinfo");
    gx_device_xps_f2i_t *f2i =
        (gx_device_xps_f2i_t *)gs_alloc_bytes(mem->non_gc_memory, sizeof(gx_device_xps_f2i_t), "zinfo node");

    if_debug1m('_', dev->memory, "new node %s\n", filename);

    if (info == NULL || f2i == NULL)
        return gs_throw_code(gs_error_VMerror);

    f2i->info = info;
    f2i->next = NULL;
    f2i->memory = mem->non_gc_memory;

    if (xps_dev->f2i == 0) { /* no head */
        xps_dev->f2i = f2i;
        xps_dev->f2i_tail = f2i;
    } else { /* append the node */
        xps_dev->f2i_tail->next = f2i;
        xps_dev->f2i_tail = f2i;
    }

    lenstr = strlen(filename);
    f2i->filename = (char*)gs_alloc_bytes(mem->non_gc_memory, lenstr + 1, "zinfo_filename");
    if (f2i->filename == NULL)
        return gs_throw_code(gs_error_VMerror);
    strcpy(f2i->filename, filename);

    info->data.fp = 0;
    info->data.count = 0;
    info->saved = false;

    if (gs_debug_c('_')) {
        gx_device_xps_f2i_t *f2i = xps_dev->f2i;
#ifdef DEBUG
        int node = 1;
        gx_device_xps_f2i_t *prev_f2i;
#endif

        while (f2i != NULL) {
            if_debug2m('_', dev->memory, "node:%d %s\n", node++, f2i->filename);
#ifdef DEBUG
            prev_f2i = f2i;
#endif
            f2i=f2i->next;
        }
        if_debug1m('_', dev->memory, "tail okay=%s\n", prev_f2i == xps_dev->f2i_tail ? "yes" : "no");
    }
    return 0;
}

/* add a new file to the zip archive */
static int
zip_add_file(gx_device_xps *xps_dev, const char *filename)
{
    int code = zip_new_info_node(xps_dev, filename);
    if (code < 0)
        return gs_throw_code(gs_error_Fatal);
    return 0;
}

/* look up the information associated with the zip archive [filename] */
static gx_device_xps_zinfo_t *
zip_look_up_file_info(gx_device_xps *xps_dev, const char *filename)
{
    gx_device_xps_f2i_t *cur = xps_dev->f2i;
    while (cur) {
        if (!strcmp(cur->filename, filename))
            break;
        cur = cur->next;
    }
    return (cur ? cur->info : NULL);
}

/* Add data to an archived zip file, create the file if it doesn't exist */
static int
zip_append_data(gs_memory_t *mem, gx_device_xps_zinfo_t *info, byte *data, uint len)
{
    uint count;

    /* if there is no data then this is the first call for this
       archive file, open a temporary file to store the data. */
    if (info->data.count == 0) {
        char *filename =
          (char *)gs_alloc_bytes(mem->non_gc_memory, gp_file_name_sizeof,
                "zip_append_data(filename)");
        gp_file *fp;

        if (!filename) {
            return(gs_throw_code(gs_error_VMerror));
        }

        fp = gp_open_scratch_file_rm(mem, "xpsdata-",
                                        filename, "wb+");
        gs_free_object(mem->non_gc_memory, filename, "zip_append_data(filename)");
        info->data.fp = fp;
    }

    /* shouldn't happen unless the first call opens the temporary file
       but writes no data. */
    if (info->data.fp == NULL)
        return gs_throw_code(gs_error_Fatal);

    count = gp_fwrite(data, 1, len, info->data.fp);
    if (count != len) {
        gp_fclose(info->data.fp);
        return -1;
    }
    /* probably unnecessary but makes debugging easier */
    gp_fflush(info->data.fp);
    info->data.count += len;

    return 0;
}

/* write to one of the archives (filename) in the zip archive */
static int
write_to_zip_file(gx_device_xps *xps_dev, const char *filename,
                  byte *data, uint len)
{
    gx_device *dev = (gx_device *)xps_dev;
    gs_memory_t *mem = dev->memory;

    gx_device_xps_zinfo_t *info = zip_look_up_file_info(xps_dev, filename);
    int code = 0;

    /* No information on this archive file, create a new zip entry
       info node */
    if (info == NULL) {
        code = zip_add_file(xps_dev, filename);
        if (code < 0)
            return gs_rethrow_code(code);
        info = zip_look_up_file_info(xps_dev, filename);
    }

    if (info == NULL)
        return gs_throw_code(gs_error_Fatal);

    code = zip_append_data(mem, info, data, len);
    if (code < 0)
        return gs_rethrow_code(code);

    return code;
}

static void
put_bytes(stream *zs, byte *buf, uint len)
{
    uint used;
    sputs(zs, buf, len, &used);
    /* NB return value */
}

static void
put_u32(stream *zs, unsigned long l)
{
    sputc(zs, (byte)(l));
    sputc(zs, (byte)(l >> 8));
    sputc(zs, (byte)(l >> 16));
    sputc(zs, (byte)(l >> 24));
}

static void
put_u16(stream *zs, ushort s)
{
    sputc(zs, (byte)(s));
    sputc(zs, (byte)(s >> 8));
}

/* TODO - the following 2 definitions need to done correctly */
static ushort
make_dos_date(uint year, uint month, uint day)
{
    uint delta_1980 = year - 1980;
    return (delta_1980 << 9 | month << 5 | day);
}

static ushort
make_dos_time(uint hour, uint min, uint sec)
{
    /* note the seconds are multiplied by 2 */
    return (hour << 11 | min << 5 | sec >> 1);
}

/* convenience routine. */
static int
write_str_to_zip_file(gx_device_xps *xps_dev, const char *filename,
                      const char *str)
{
    return write_to_zip_file(xps_dev, filename, (byte *)str, strlen(str));
}

/* Used to add ICC profiles to the zip file. */
static int
add_data_to_zip_file(gx_device_xps *xps_dev, const char *filename, byte *buf, long size)
{
    gx_device_xps_zinfo_t *info = zip_look_up_file_info(xps_dev, filename);
    int code;
    long curr_pos;
    unsigned long crc = 0;
    stream *f;
    ushort date, time;

    /* This file should not yet exist */
    if (info == NULL) {
        code = zip_add_file(xps_dev, filename);
        if (code < 0)
            return gs_rethrow_code(code);
        info = zip_look_up_file_info(xps_dev, filename);
    }
    else {
        return gs_throw_code(gs_error_Fatal);
    }
    f = ((gx_device_vector*)xps_dev)->strm;
    curr_pos = stell(f);

    /* Figure out the crc */
    crc = crc32(0L, Z_NULL, 0);
    crc = crc32(crc, buf, size);

    date = make_dos_date(2012, 2, 16);
    time = make_dos_time(9, 15, 0);

    put_u32(f, 0x04034b50); /* magic */
    put_u16(f, 20);         /* version */
    put_u16(f, 0);          /* flags */
    put_u16(f, 0);          /* method */
    put_u16(f, time);
    put_u16(f, date);
    put_u32(f, crc);
    put_u32(f, size); /* compressed */
    put_u32(f, size); /* uncompressed */
    put_u16(f, strlen(filename));
    put_u16(f, 0);         /* extra field length */
    put_bytes(f, (byte *)filename, strlen(filename));
    put_bytes(f, buf, size);
    put_bytes(f, 0, 0); /* extra field */

    /* Now we need to add the info about this file */
    xps_dev->f2i_tail->info->CRC = crc;
    xps_dev->f2i_tail->info->time = time;
    xps_dev->f2i_tail->info->date = date;
    xps_dev->f2i_tail->info->data.count = size;
    xps_dev->f2i_tail->info->current_pos = curr_pos;
    xps_dev->f2i_tail->info->file_size = size;
    /* Mark the file as already stored */
    xps_dev->f2i_tail->info->saved = true;
    return 0;
}

/* Used to add images to the zip file. This file is added now
and not later like the other files */
static int
add_file_to_zip_file(gx_device_xps *xps_dev, const char *filename, gp_file *src)
{
    gx_device_xps_zinfo_t *info = zip_look_up_file_info(xps_dev, filename);
    int code = 0;
    long curr_pos;
    unsigned long crc = 0;
    byte buf[4];
    uint nread;
    unsigned long count = 0;
    stream *f;
    ushort date, time;

    /* This file should not yet exist */
    if (info == NULL) {
        code = zip_add_file(xps_dev, filename);
        if (code < 0)
            return gs_rethrow_code(code);
        info = zip_look_up_file_info(xps_dev, filename);
    }
    else {
        return gs_throw_code(gs_error_Fatal);
    }

    f = ((gx_device_vector*)xps_dev)->strm;
    curr_pos = stell(f);

    /* Get to the start */
    if (gp_fseek(src, 0, 0) < 0)
        return gs_throw_code(gs_error_Fatal);

    /* Figure out the crc */
    crc = crc32(0L, Z_NULL, 0);
    /* Chunks of 4 until we get to remainder */
    while (!gp_feof(src)) {
        nread = gp_fread(buf, 1, sizeof(buf), src);
        count = count + nread;
        crc = crc32(crc, buf, nread);
    }

    date = make_dos_date(2012, 2, 16);
    time = make_dos_time(9, 15, 0);

    put_u32(f, 0x04034b50); /* magic */
    put_u16(f, 20);         /* version */
    put_u16(f, 0);          /* flags */
    put_u16(f, 0);          /* method */
    put_u16(f, time);
    put_u16(f, date);
    put_u32(f, crc);
    put_u32(f, count); /* compressed */
    put_u32(f, count); /* uncompressed */
    put_u16(f, strlen(filename));
    put_u16(f, 0);         /* extra field length */
    put_bytes(f, (byte *)filename, strlen(filename));
    {
        if (gp_fseek(src, (gs_offset_t)0, 0) < 0)
            return gs_throw_code(gs_error_Fatal);
        while (!gp_feof(src)) {
            ulong nread = gp_fread(buf, 1, sizeof(buf), src);
            put_bytes(f, buf, nread);
        }
    }
    put_bytes(f, 0, 0); /* extra field */

    /* Now we need to add the info about this file */
    xps_dev->f2i_tail->info->CRC = crc;
    xps_dev->f2i_tail->info->time = time;
    xps_dev->f2i_tail->info->date = date;
    xps_dev->f2i_tail->info->data.count = count;
    xps_dev->f2i_tail->info->current_pos = curr_pos;
    xps_dev->f2i_tail->info->file_size = count;
    /* Mark the file as already stored */
    xps_dev->f2i_tail->info->saved = true;
    return 0;
}

/* zip up a single file moving its data from the temporary file to the
   zip container. */
static int
zip_close_archive_file(gx_device_xps *xps_dev, const char *filename)
{
    gx_device_xps_zinfo_t *info = zip_look_up_file_info(xps_dev, filename);
    gx_device_xps_zdata_t data;
    byte buf[4];
    unsigned long crc = 0;
    int count = 0;
    int len;
    /* we can't use the vector stream accessor because it calls beginpage */
    stream *f = ((gx_device_vector*)xps_dev)->strm;

    if (info == NULL)
        return -1;

    /* Already stored */
    if (info->saved)
        return 0;

    data = info->data;
    if ((int)data.count >= 0) {
        gp_file *fp = data.fp;
        uint nread;

        if (fp == NULL)
            return gs_throw_code(gs_error_Fatal);

        crc = crc32(0L, Z_NULL, 0);
        gp_rewind(fp);
        while (!gp_feof(fp)) {
            nread = gp_fread(buf, 1, sizeof(buf), fp);
            crc = crc32(crc, buf, nread);
            count = count + nread;
        }
        /* If this is a TIFF file, then update the data count information.
           During the writing of the TIFF directory there is seeking and
           relocations that occur, which make data.count incorrect.
           We could just do this for all the files and avoid the test. */
        len = strlen(filename);
        if (len > 3 && (strncmp("tif", &(filename[len - 3]), 3) == 0)) {
            info->data.count = count;
            data = info->data;
            data.fp = fp;
        }
    }

    info->current_pos = stell(f);
    info->CRC = crc;

    /* NB should use ghostscript "gp" time and date functions for
       this, for now we hardwire the dates. */
    info->date = make_dos_date(2012, 2, 16);
    info->time = make_dos_time(9, 15, 0);

    put_u32(f, 0x04034b50); /* magic */
    put_u16(f, 20);         /* version */
    put_u16(f, 0);          /* flags */
    put_u16(f, 0);          /* method */
    put_u16(f, info->time);
    put_u16(f, info->date);
    put_u32(f, crc);
    put_u32(f, data.count); /* compressed */
    put_u32(f, data.count); /* uncompressed */
    put_u16(f, strlen(filename));
    put_u16(f, 0);         /* extra field length */
    put_bytes(f, (byte *)filename, strlen(filename));
    {
        gp_file *fp = data.fp;
        gp_rewind(fp);
        while (!gp_feof(fp)) {
                ulong nread = gp_fread(buf, 1, sizeof(buf), fp);
                put_bytes(f, buf, nread);
        }
        gp_fclose(fp);
    }
    put_bytes(f, 0, 0); /* extra field */

    /* Mark as saved */
    info->saved = true;
    return 0;
}

/* walk the file info node list writing all the files to the
   archive */
static int
zip_close_all_archive_files(gx_device_xps *xps_dev)
{
    gx_device_xps_f2i_t *f2i = xps_dev->f2i;
    while (f2i) {
        int code = zip_close_archive_file(xps_dev, f2i->filename);
        if (code < 0) {
            return code;
        }
        f2i = f2i->next;
    }
    return 0;
}

/* write all files to the zip container and write the zip central
   directory */
static int
zip_close_archive(gx_device_xps *xps_dev)
{
    gx_device_xps_f2i_t *f2i = xps_dev->f2i;

    int entry_count = 0;
    long pos_before_cd;
    long pos_after_cd;
    /* we can't use the vector stream accessor because it calls beginpage */
    stream *f = ((gx_device_vector*)xps_dev)->strm;
    int code = zip_close_all_archive_files(xps_dev);

    pos_before_cd = stell(f);

    if (code < 0)
        return code;

    while (f2i) {
        gx_device_xps_zinfo_t *info = f2i->info;
        put_u32(f, 0x02014b50); /* magic */
        put_u16(f, 20); /* version made by */
        put_u16(f, 20); /* version required */
        put_u16(f, 0); /* bit flag */
        put_u16(f, 0); /* compression method */
        put_u16(f, info->time);
        put_u16(f, info->date);
        put_u32(f, info->CRC);
        put_u32(f, info->data.count);  /* compressed */
        put_u32(f, info->data.count); /* uncompressed */
        put_u16(f, strlen(f2i->filename));

        /* probably will never use the next 6 so we just set them to
           zero here */
        put_u16(f, 0); /* extra field length */
        put_u16(f, 0); /* file comment length */
        put_u16(f, 0); /* disk number */
        put_u16(f, 0); /* internal file attributes */
        put_u32(f, 0); /* external file attributes */

        put_u32(f, info->current_pos);
        put_bytes(f, (byte *)f2i->filename, strlen(f2i->filename));

        put_bytes(f, 0, 0); /* extra field */
        put_bytes(f, 0, 0); /* extra comment */

        entry_count++;
        f2i = f2i->next;
    }

    pos_after_cd = stell(f);

    put_u32(f, 0x06054b50);
    put_u16(f, 0); /* number of disks */
    put_u16(f, 0); /* disk where central directory starts */
    put_u16(f, entry_count); /* # of records in cd */
    put_u16(f, entry_count); /* total # of records in cd */
    put_u32(f, pos_after_cd - pos_before_cd); /* size of central cd */
    put_u32(f, pos_before_cd); /* offset of central directory */
    put_u16(f, 0); /* comment length */
    put_bytes(f, 0, 0); /* comment */

    return 0;
}

/* Brush management */
static void
xps_setstrokebrush(gx_device_xps *xps, xps_brush_t type)
{
    if_debug1m('_', xps->memory, "xps_setstrokebrush:%d\n", (int)type);

    xps->stroketype = type;
}

static void
xps_setfillbrush(gx_device_xps *xps, xps_brush_t type)
{
    if_debug1m('_', xps->memory, "xps_setfillbrush:%d\n", (int)type);

    xps->filltype = type;
}

/* Device procedures */
static int
xps_open_device(gx_device *dev)
{
    gx_device_vector * vdev = (gx_device_vector*)dev;
    gx_device_xps * xps = (gx_device_xps*)dev;
    int code = 0;

    vdev->v_memory = dev->memory;
    vdev->vec_procs = &xps_vector_procs;
    gdev_vector_init(vdev);
    code = gdev_vector_open_file_options(vdev, 512,
        VECTOR_OPEN_FILE_SEQUENTIAL);
    if (code < 0)
      return gs_rethrow_code(code);

    /* In case ths device has been subclassed, descend to the terminal
     * of the chain. (Setting the variables in a subclassing device
     * doesn't do anythign useful.....)
     */
    while(vdev->child)
        vdev = (gx_device_vector *)vdev->child;
    xps = (gx_device_xps*)vdev;

    /* xps-specific initialization goes here */
    xps->page_count = 0;
    xps->relations_head = NULL;
    xps->relations_tail = NULL;
    xps->strokecolor = gx_no_color_index;
    xps->fillcolor = gx_no_color_index;
    xps_setstrokebrush(xps, xps_solidbrush);
    xps_setfillbrush(xps, xps_solidbrush);
    /* these should be the graphics library defaults instead? */
    xps->linewidth = XPS_DEFAULT_LINEWIDTH;
    xps->linecap = XPS_DEFAULT_LINECAP;
    xps->linejoin = XPS_DEFAULT_LINEJOIN;
    xps->miterlimit = XPS_DEFAULT_MITERLIMIT;
    xps->can_stroke = true;
    xps->in_path = false;
    xps->in_clip = false;
    xps->clip_written = false;
    xps->rect_written = false;
    /* zip info */
    xps->f2i = NULL;
    xps->f2i_tail = NULL;

    /* Image related stuff */
    xps->image_count = 0;
    xps->xps_pie = NULL;

    /* ICC related stuff */
    xps->icc_data = NULL;

    code = write_str_to_zip_file(xps, (char *)"FixedDocumentSequence.fdseq",
                                 fixed_document_sequence);
    if (code < 0)
        return gs_rethrow_code(code);

    code = write_str_to_zip_file(xps, (char *)"[Content_Types].xml",
                                 xps_content_types);
    if (code < 0)
        return gs_rethrow_code(code);

    code = write_str_to_zip_file(xps,
                                 (char *)"Documents/1/FixedDocument.fdoc",
                                 fixed_document_fdoc_header);
    if (code < 0)
        return gs_rethrow_code(code);

    /* Right out the magical stuff related to the fix document sequence relationship */
    code = write_str_to_zip_file(xps, (char *)"_rels/.rels", rels_header);
    if (code < 0)
        return gs_rethrow_code(code);

    code = write_str_to_zip_file(xps, (char *)"_rels/.rels", rels_fdseq);
    if (code < 0)
        return gs_rethrow_code(code);

    return code;
}

/* write xps commands to Pages/%d.fpage */
static int
write_str_to_current_page(gx_device_xps *xps, const char *str)
{
    const char *page_template = "Documents/1/Pages/%d.fpage";
    char buf[128]; /* easily enough to accommodate the string and a page number */

    /* we're one ahead of the page count */
    int code = gs_snprintf(buf, sizeof(buf), page_template, xps->page_count+1);
    if (code < 0)
        return gs_rethrow_code(code);

    return write_str_to_zip_file(xps, buf, str);
}

/* add relationship to Pages/_rels/%d.fpage.rels */
static int
add_new_relationship(gx_device_xps *xps, const char *str)
{
    xps_relations_t *rel;

    /* See if we already have this one */
    for (rel = xps->relations_head; rel; rel = rel->next)
        if (!strcmp(rel->relation, str))
            return 0;

    rel = (xps_relations_t*)gs_alloc_bytes(xps->memory->non_gc_memory,
        sizeof(xps_relations_t), "add_new_relationship");
    if (!rel) {
        return gs_throw_code(gs_error_VMerror);
    }
    rel->memory = xps->memory->non_gc_memory;
    rel->next = NULL;

    rel->relation = (char*)gs_alloc_bytes(xps->memory->non_gc_memory,
        strlen(str) + 1, "add_new_relationship");
    if (!rel->relation) {
        gs_free_object(rel->memory, rel, "add_new_relationship");
        return gs_throw_code(gs_error_VMerror);
    }
    memcpy(rel->relation, str, strlen(str) + 1);

    if (!xps->relations_head) {
        xps->relations_head = rel;
        xps->relations_tail = rel;
    } else {
        xps->relations_tail->next = rel;
        xps->relations_tail = rel;
    }

    return 0;
}

static int
close_page_relationship(gx_device_xps *xps)
{
    const char *rels_template = "Documents/1/Pages/_rels/%d.fpage.rels";
    char buf[128]; /* easily enough to accommodate the string and a page number */

    int code = gs_snprintf(buf, sizeof(buf), rels_template, xps->page_count + 1);
    if (code < 0)
        return gs_rethrow_code(code);

    write_str_to_zip_file(xps, buf, "</Relationships>");
    return 0;
}

static int
write_page_relationship(gx_device_xps* xps)
{
    const char* rels_template = "Documents/1/Pages/_rels/%d.fpage.rels";
    char buf[128]; /* easily enough to accommodate the string and a page number */
    char line[300];
    const char* fmt;
    int count = 0;
    xps_relations_t *rel = xps->relations_head;

    int code = gs_snprintf(buf, sizeof(buf), rels_template, xps->page_count + 1);
    if (code < 0)
        return gs_rethrow_code(code);

    write_str_to_zip_file(xps, buf, rels_header);
    fmt = "<Relationship Target = \"/%s\" Id = \"R%d\" Type = %s/>\n";

    while (rel) {
        gs_snprintf(line, sizeof(line), fmt, rel->relation, count, rels_req_type);
        write_str_to_zip_file(xps, buf, line);
        rel = rel->next;
        count++;
    }

    return 0;
}

static void
release_relationship(gx_device_xps* xps)
{
    xps_relations_t *rel = xps->relations_head;
    xps_relations_t *old;

    while (rel) {
        old = rel;
        rel = rel->next;
        gs_free_object(old->memory, old->relation, "release_relationship");
        gs_free_object(old->memory, old, "release_relationship");
    }

    xps->relations_head = NULL;
    xps->relations_tail = NULL;
    return;
}

        /* Page management */

/* Complete a page */
static int
xps_output_page(gx_device *dev, int num_copies, int flush)
{
    gx_device_xps *const xps = (gx_device_xps*)dev;
    gx_device_vector *vdev = (gx_device_vector *)dev;
    int code;

    if (!vdev->in_page) {
        (*vdev_proc(vdev, beginpage)) (vdev);
        vdev->in_page = true;
    }
    write_str_to_current_page(xps, "</Canvas></FixedPage>");

    if (xps->relations_head)
    {
        /* Write all the relations for the page */
        code = write_page_relationship(xps);
        if (code < 0)
            return gs_rethrow_code(code);

        /* Close the relationship xml */
        code = close_page_relationship(xps);
        if (code < 0)
            return gs_rethrow_code(code);

        release_relationship(xps);
    }

    xps->page_count++;

    if (gp_ferror(xps->file))
      return gs_throw_code(gs_error_ioerror);

    if ((code=gx_finish_output_page(dev, num_copies, flush)) < 0)
        return code;

    /* Check if we need to change the output file for separate
       pages. NB not sure if this will work correctly. */
    if (gx_outputfile_is_separate_pages(((gx_device_vector *)dev)->fname, dev->memory)) {
        if ((code = xps_close_device(dev)) < 0)
            return code;
        code = xps_open_device(dev);
    }

    if_debug1m('_', dev->memory, "xps_output_page - page=%d\n", xps->page_count);
    vdev->in_page = false;

    return code;
}

static void
xps_release_icc_info(gx_device *dev)
{
    gx_device_xps *xps = (gx_device_xps*)dev;
    xps_icc_data_t *curr;
    xps_icc_data_t *icc_data = xps->icc_data;

    while (icc_data != NULL) {
        curr = icc_data;
        icc_data = icc_data->next;
        gs_free(dev->memory->non_gc_memory, curr, sizeof(xps_icc_data_t), 1,
            "xps_release_icc_info");
    }
    return;
}

static void
xps_release_achive_file_names(gx_device* dev)
{
    gx_device_xps* xps = (gx_device_xps*)dev;
    gx_device_xps_f2i_t *curr;
    gx_device_xps_f2i_t *f2i = xps->f2i;

    while (f2i) {
        curr = f2i;
        f2i = f2i->next;
        gs_free_object(curr->memory, curr->info, "xps_release_achive_file_names(info)");
        gs_free_object(curr->memory, curr->filename, "xps_release_achive_file_names(filename)");
        gs_free_object(curr->memory, curr, "xps_release_achive_file_names(f2i)");
    }
    return;
}

/* Close the device */
static int
xps_close_device(gx_device *dev)
{
    gx_device_xps *xps = (gx_device_xps*)dev;
    int code;

    /* closing for the FixedDocument */
    code = write_str_to_zip_file(xps, "Documents/1/FixedDocument.fdoc", "</FixedDocument>");
    if (code < 0)
        return gs_rethrow_code(code);

    if (gp_ferror(xps->file))
      return gs_throw_code(gs_error_ioerror);

    code = zip_close_archive(xps);
    if (code < 0)
        return gs_rethrow_code(code);

    /* Release the icc info */
    xps_release_icc_info(dev);

    /* Release the archive file names */
    xps_release_achive_file_names(dev);

    code = gdev_vector_close_file((gx_device_vector*)dev);
    if (code < 0)
        return gs_rethrow_code(code);

    if (strlen((const char *)xps->PrinterName)) {
        int reason;
        code = gp_xpsprint(xps->fname, (char *)xps->PrinterName, &reason);
        if (code < 0) {
            switch(code) {
                case -1:
                    break;
                case -2:
                    eprintf1("ERROR: Could not create competion event: %08X\n", reason);
                    break;
                case -3:
                    eprintf1("ERROR: Could not create MultiByteString from PrinerName: %s\n", xps->PrinterName);
                    break;
                case -4:
                    eprintf1("ERROR: Could not start XPS print job: %08X\n", reason);
                    break;
                case -5:
                    eprintf1("ERROR: Could not create XPS OM Object Factory: %08X\n", reason);
                    break;
                case -6:
                    eprintf1("ERROR: Could not create MultiByteString from OutputFile: %s\n", xps->fname);
                    break;
                case -7:
                    eprintf1("ERROR: Could not create Package from File %08X\n", reason);
                    break;
                case -8:
                    eprintf1("ERROR: Could not write Package to stream %08X\n", reason);
                    break;
                case -9:
                    eprintf1("ERROR: Could not close job stream: %08X\n", reason);
                    break;
                case -10:
                    eprintf1("ERROR: Wait for completion event failed: %08X\n", reason);
                    break;
                case -11:
                    eprintf1("ERROR: Could not get job status: %08X\n", reason);
                    break;
                case -12:
                    eprintf("ERROR: job was cancelled\n");
                    break;
                case -13:
                    eprintf1("ERROR: Print job failed: %08X\n", reason);
                    break;
                case -14:
                    eprintf("ERROR: unexpected failure\n");
                    break;
                case -15:
                case -16:
                    eprintf("ERROR: XpsPrint.dll does not exist or is missing a required method\n");
                    break;
            }
            return(gs_throw_code(gs_error_invalidaccess));
        }
    }
    return(0);
}

/* Respond to a device parameter query from the client */
static int
xps_get_params(gx_device *dev, gs_param_list *plist)
{
    int code = 0;

    if_debug0m('_', dev->memory, "xps_get_params\n");

    /* call our superclass to add its standard set */
    code = gdev_vector_get_params(dev, plist);
    if (code < 0)
      return gs_rethrow_code(code);

#if defined(__WIN32__) && XPSPRINT==1
    {
        gs_param_string ofns;
        gx_device_xps *const xps = (gx_device_xps*)dev;

        /* xps specific parameters are added to plist here */
        ofns.data = (const byte *)&xps->PrinterName;
        ofns.size = strlen(xps->fname);
        ofns.persistent = false;
        if ((code = param_write_string(plist, "PrinterName", &ofns)) < 0)
            return code;
    }
#endif
    return code;
}

/* Read the device parameters passed to us by the client */
static int
xps_put_params(gx_device *dev, gs_param_list *plist)
{
    int code = 0;

    if_debug0m('_', dev->memory, "xps_put_params\n");

    /* xps specific parameters are parsed here */
#if defined(__WIN32__) && XPSPRINT==1
    { /* NB: The following is not strictly correct since changes are */
        /*     made even if 'gdev_vector_put_params' returns an error. */
        gs_param_name param_name;
        gs_param_string pps;
        gx_device_xps *const xps = (gx_device_xps*)dev;
        switch (code = param_read_string(plist, (param_name = "PrinterName"), &pps)) {
        case 0:
            if (pps.size > 64) {
                eprintf1("\nERROR: PrinterName too long (max %d)\n", MAXPRINTERNAME);
            } else {
                memcpy(xps->PrinterName, pps.data, pps.size);
                xps->PrinterName[pps.size] = 0;
            }
            break;
        default:
            param_signal_error(plist, param_name, code);
        case 1:
            /*            memset(&xps->PrinterName, 0x00, MAXPRINTERNAME);*/
            break;
        }
    }
#endif
    /* call our superclass to get its parameters, like OutputFile */
    code = gdev_vector_put_params(dev, plist);  /* errors are handled by caller  or setpagedevice */

    return code;
}

static int
set_state_color(gx_device_vector *vdev, const gx_drawing_color *pdc, gx_color_index *color)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;

    /* hack so beginpage is called */
    (void)gdev_vector_stream((gx_device_vector*)xps);

    /* Usually this is not an actual error but a signal to the
       graphics library to simplify the color */
    if (!gx_dc_is_pure(pdc)) {
        return_error(gs_error_rangecheck);
    }

    *color = gx_dc_pure_color(pdc);
    return 0;
}

static int
xps_setfillcolor(gx_device_vector *vdev, const gs_gstate *pgs, const gx_drawing_color *pdc)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;

    if_debug1m('_', xps->memory, "xps_setfillcolor:%06X\n", (uint32_t)gx_dc_pure_color(pdc));

    return set_state_color(vdev, pdc, &xps->fillcolor);
}

static int
xps_setstrokecolor(gx_device_vector *vdev, const gs_gstate *pgs, const gx_drawing_color *pdc)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;

    if_debug1m('_', xps->memory, "xps_setstrokecolor:%06X\n", (uint32_t)gx_dc_pure_color(pdc));

    return set_state_color(vdev, pdc, &xps->strokecolor);
}

static int
xps_beginpage(gx_device_vector *vdev)
{

    gx_device_xps *xps = (gx_device_xps *)vdev;
    char buf[128];
    int code = 0;

    if_debug0m('_', xps->memory, "xps_beginpage\n");

    {
        const char *template = "<PageContent Source=\"Pages/%d.fpage\" />";
        /* Note page count is 1 less than the current page */
        code = gs_snprintf(buf, sizeof(buf), template, xps->page_count + 1);
        if (code < 0)
            return gs_rethrow_code(code);

        /* Put a reference to this new page in the FixedDocument */
        code = write_str_to_zip_file(xps, "Documents/1/FixedDocument.fdoc", buf);
        if (code < 0)
            return gs_rethrow_code(code);

    }

    {
        const char *page_size_template = "<FixedPage Width=\"%d\" Height=\"%d\" "
            "xmlns=\"http://schemas.microsoft.com/xps/2005/06\" xml:lang=\"en-US\">\n";
        code = gs_snprintf(buf, sizeof(buf), page_size_template,
                       (int)(xps->MediaSize[0] * 4.0/3.0),  /* pts -> 1/96 inch */
                       (int)(xps->MediaSize[1] * 4.0/3.0));
        if (code < 0)
            return gs_rethrow_code(code);
        code = write_str_to_current_page(xps, buf);
        if (code < 0)
            return gs_rethrow_code(code);
    }
    {
        const char *canvas_template = "<Canvas RenderTransform=\"%g,%g,%g,%g,%g,%g\">\n";
        code = gs_snprintf(buf, sizeof(buf), canvas_template,
                       96.0/xps->HWResolution[0], 0.0, 0.0,
                       96.0/xps->HWResolution[1], 0.0, 0.0);
        if (code < 0)
            return gs_rethrow_code(code);

        code = write_str_to_current_page(xps, buf);
        if (code < 0)
            return gs_rethrow_code(code);
    }

    if_debug4m('_', xps->memory,
               "page info: resx=%g resy=%g width=%d height=%d\n",
               xps->HWResolution[0], xps->HWResolution[1],
               (int)xps->MediaSize[0], (int)xps->MediaSize[1]);

    return code;
}

static int
xps_setlinewidth(gx_device_vector *vdev, double width)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;

    if_debug1m('_', xps->memory, "xps_setlinewidth(%lf)\n", width);

    xps->linewidth = width;

    return 0;
}
static int
xps_setlinecap(gx_device_vector *vdev, gs_line_cap cap)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;
#ifdef DEBUG
    /* Only used for debug print, so guiard to prevent warnings on non-debug builds */
    const char *linecap_names[] = {"butt", "round", "square",
        "triangle", "unknown"};
#endif

    if ((int)cap < 0 || (int)cap > gs_cap_unknown)
        return gs_throw_code(gs_error_rangecheck);
    if_debug1m('_', xps->memory, "xps_setlinecap(%s)\n", linecap_names[cap]);

    xps->linecap = cap;

    return 0;
}
static int
xps_setlinejoin(gx_device_vector *vdev, gs_line_join join)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;
#ifdef DEBUG
    /* Only used for debug print, so guiard to prevent warnings on non-debug builds */
    const char *linejoin_names[] = {"miter", "round", "bevel",
        "none", "triangle", "unknown"};
#endif

    if ((int)join < 0 || (int)join > gs_join_unknown)
        return gs_throw_code(gs_error_rangecheck);
    if_debug1m('_', xps->memory, "xps_setlinejoin(%s)\n", linejoin_names[join]);

    xps->linejoin = join;

    return 0;
}
static int
xps_setmiterlimit(gx_device_vector *vdev, double limit)
{
    if_debug1m('_', vdev->memory, "xps_setmiterlimit(%lf)\n", limit);
    return 0;
}
static int
xps_setdash(gx_device_vector *vdev, const float *pattern,
            uint count, double offset)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;
    if_debug2m('_', vdev->memory, "xps_setdash count:%d offset:%g\n", count, offset);
    xps->can_stroke = (count == 0);
    return 0;
}
static int
xps_setlogop(gx_device_vector *vdev, gs_logical_operation_t lop,
             gs_logical_operation_t diff)
{
    if_debug2m('_', vdev->memory, "xps_setlogop(%u,%u) set logical operation\n",
        lop, diff);
    /* XPS can fake some simpler modes, but we ignore this for now. */
    return 0;
}

        /* Other state */

static bool
xps_can_handle_hl_color(gx_device_vector *vdev, const gs_gstate *pgs,
                          const gx_drawing_color *pdc)
{
    if_debug0m('_', vdev->memory, "xps_can_handle_hl_color\n");
    return false;
}

/* Paths */
static bool
image_brush_fill(gx_path_type_t path_type, xps_brush_t brush_type)
{
    return brush_type == xps_imagebrush;
}

static bool
drawing_path(gx_path_type_t path_type, xps_brush_t brush_type)
{
    return ((path_type & gx_path_type_stroke) || (path_type & gx_path_type_fill) ||
        (path_type & gx_path_type_clip) || image_brush_fill(path_type, brush_type));
}

static void
xps_finish_image_path(gx_device_vector *vdev)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;
    char line[300];
    const char *fmt;
    gs_matrix matrix;

    /* If an error occurs during an image, we can get here after the enumerator
     * has been freed - if that's the case, just bail out immediately
     */
    if (xps->xps_pie == NULL)
        return;
    /* Path is started.  Do the image brush image brush and close the path */
    write_str_to_current_page(xps, "\t<Path.Fill>\n");
    write_str_to_current_page(xps, "\t\t<ImageBrush ");
    fmt = "ImageSource = \"{ColorConvertedBitmap /%s /%s}\" Viewbox=\"%d, %d, %d, %d\" ViewboxUnits = \"Absolute\" Viewport = \"%d, %d, %d, %d\" ViewportUnits = \"Absolute\" TileMode = \"None\" >\n";
    gs_snprintf(line, sizeof(line), fmt, xps->xps_pie->file_name, xps->xps_pie->icc_name,
        0, 0, xps->xps_pie->width, xps->xps_pie->height, 0, 0,
        xps->xps_pie->width, xps->xps_pie->height);
    write_str_to_current_page(xps, line);

    /* Now the render transform.  This is applied to the image brush. Path
    is already transformed */
    write_str_to_current_page(xps, "\t\t\t<ImageBrush.Transform>\n");
    fmt = "\t\t\t\t<MatrixTransform Matrix = \"%g,%g,%g,%g,%g,%g\" />\n";
    matrix = xps->xps_pie->mat;
    gs_snprintf(line, sizeof(line), fmt,
        matrix.xx, matrix.xy, matrix.yx, matrix.yy, matrix.tx, matrix.ty);
    write_str_to_current_page(xps, line);
    write_str_to_current_page(xps, "\t\t\t</ImageBrush.Transform>\n");
    write_str_to_current_page(xps, "\t\t</ImageBrush>\n");
    write_str_to_current_page(xps, "\t</Path.Fill>\n");
    /* End this path */
    write_str_to_current_page(xps, "</Path>\n");
}

static int
xps_dorect(gx_device_vector *vdev, fixed x0, fixed y0,
           fixed x1, fixed y1, gx_path_type_t type)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;
    char line[300];
    const char *fmt;
    uint32_t c;

    (void)gdev_vector_stream((gx_device_vector*)xps);

    if_debug9m('_', xps->memory,
               "rect type=%d coords=%g,%g %g,%g %g,%g %g,%g\n", type,
                fixed2float(x0), fixed2float(y0),
                fixed2float(x0), fixed2float(y1),
                fixed2float(x1), fixed2float(y1),
                fixed2float(x1), fixed2float(y0));


    /* skip non-drawing paths for now */
    if (!drawing_path(type, xps->filltype)) {
        if_debug1m('_', xps->memory, "xps_dorect: type not supported %x\n", type);
        return 0;
    }

    /* CLIP - we only write clips as an attribute of a path */
    if (type & gx_path_type_clip && !image_brush_fill(type, xps->filltype)) {
        if (xps->in_path == false)
            return 0;
        fmt = "Clip=\"M %g,%g V %g H %g V %g Z\" ";
        gs_snprintf(line, sizeof(line), fmt,
                   fixed2float(x0), fixed2float(y0),
                   fixed2float(y1), fixed2float(x1),
                   fixed2float(y0));
        write_str_to_current_page(xps, line);
        xps->clip_written = true;
        return 0;
    }

    if (xps->in_path && image_brush_fill(type, xps->filltype)) {
        write_str_to_current_page(xps, "/>\n");
        xps->in_path = false;
        xps->in_clip = false;
        xps->clip_written = false;
    }

    if (xps->in_path && xps->rect_written) {
        write_str_to_current_page(xps, "/>\n");
        xps->in_path = false;
        xps->in_clip = false;
        xps->clip_written = false;
        xps->rect_written = false;
    }

    if ((type & gx_path_type_stroke) && !xps->can_stroke) {
        return_error(gs_error_rangecheck);
    }

    if (image_brush_fill(type, xps->filltype)) {
        /* Do the path data  */
        fmt = "<Path Data=\"M %g, %g L %g, %g %g, %g %g, %g Z\" >\n";
        gs_snprintf(line, sizeof(line), fmt,
            fixed2float(x0), fixed2float(y0),
            fixed2float(x0), fixed2float(y1),
            fixed2float(x1), fixed2float(y1),
            fixed2float(x1), fixed2float(y0));
        write_str_to_current_page(xps, line);
        /* And now the rest of the details */
        xps_finish_image_path(vdev);
    } else if (type & gx_path_type_fill) {
        /* Solid fill */
        if (!xps->in_path)
            write_str_to_current_page(xps, "<Path ");
        /* NB - F0 should be changed for a different winding type */
        fmt = "Fill=\"#%06X\" Data=\"M %g,%g V %g H %g V %g Z\" ";
        c = xps->fillcolor & 0xffffffL;
        gs_snprintf(line, sizeof(line), fmt, c,
                   fixed2float(x0), fixed2float(y0),
                   fixed2float(y1), fixed2float(x1),
                   fixed2float(y0));
        write_str_to_current_page(xps, line);
        if (!xps->in_path)
            write_str_to_current_page(xps, "/>\n");
        else
            xps->rect_written = true;
    } else {
        /* Solid stroke */
        if (!xps->in_path)
            write_str_to_current_page(xps, "<Path ");
        fmt = "Stroke=\"#%06X\" Data=\"M %g,%g V %g H %g V %g Z\" ";
        c = xps->strokecolor & 0xffffffL;
        gs_snprintf(line, sizeof(line), fmt, c,
                   fixed2float(x0), fixed2float(y0),
                   fixed2float(y1), fixed2float(x1),
                   fixed2float(y0));
        write_str_to_current_page(xps, line);

        if (type & gx_path_type_stroke) {
            /* NB format width. */
            fmt = "StrokeThickness=\"%g\" ";
            gs_snprintf(line, sizeof(line), fmt, xps->linewidth);
            write_str_to_current_page(xps, line);
        }
        if (!xps->in_path)
            write_str_to_current_page(xps, "/>\n");
        else
            xps->rect_written = true;
    }
    /* end and close NB \n not necessary. */
    return 0;
}

static int
gdev_xps_fill_path(gx_device * dev, const gs_gstate * pgs, gx_path * ppath,
                   const gx_fill_params * params,
                   const gx_drawing_color * pdcolor, const gx_clip_path * pcpath)
{
    gx_device_xps *xps = (gx_device_xps *)dev;
    int code = 0;

    if (gx_path_is_void(ppath)) {
        return 0;
    }

    (void)gdev_vector_stream((gx_device_vector*)xps);

    if (xps->in_path) {
        write_str_to_current_page(xps, "/>\n");
        xps->in_clip = false;
    }

    xps->clip_path_id = xps->no_clip_path_id;
    write_str_to_current_page(xps, "<Path ");
    xps->in_path = true;
    code = gdev_vector_fill_path(dev, pgs, ppath, params, pdcolor, pcpath);
    if (xps->in_path) {
        write_str_to_current_page(xps, "/>\n");
        xps->in_path = false;
    }
    xps->clip_written = false;
    xps->rect_written = false;
    return code;
}

static int
gdev_xps_stroke_path(gx_device * dev, const gs_gstate * pgs, gx_path * ppath,
                     const gx_stroke_params * params,
                     const gx_drawing_color * pdcolor, const gx_clip_path * pcpath)
{
    gx_device_xps *xps = (gx_device_xps *)dev;
    int code = 0;

    if (gx_path_is_void(ppath)) {
        return 0;
    }

    (void)gdev_vector_stream((gx_device_vector*)xps);

    if (xps->in_path) {
        write_str_to_current_page(xps, "/>\n");
        xps->in_clip = false;
    }

    xps->clip_path_id = xps->no_clip_path_id;
    write_str_to_current_page(xps, "<Path ");
    xps->in_path = true;
    code = gdev_vector_stroke_path(dev, pgs, ppath, params, pdcolor, pcpath);
    if (xps->in_path) {
        write_str_to_current_page(xps, "/>\n");
        xps->in_path = false;

    }
    xps->clip_written = false;
    xps->rect_written = false;
    return code;
}

static int
xps_beginpath(gx_device_vector *vdev, gx_path_type_t type)
{
    char line[300];
    gx_device_xps *xps = (gx_device_xps *)vdev;
    uint32_t c;
    const char *fmt;

    (void)gdev_vector_stream((gx_device_vector*)xps);

    /* skip non-drawing paths for now */
    if (!drawing_path(type, xps->filltype)) {
        if_debug1m('_', xps->memory, "xps_beginpath: type not supported %x\n", type);
        return 0;
    }

    if ((type & gx_path_type_stroke) && !xps->can_stroke) {
        return_error(gs_error_rangecheck);
    }

    c = type & gx_path_type_fill ? xps->fillcolor : xps->strokecolor;
    c &= 0xffffffL;

    /* NOTE the XPS code (ab)uses the clip to write the rectangle for the image!
    */
    if (type & gx_path_type_clip && !image_brush_fill(type, xps->filltype)) {
        if (xps->in_path == true && xps->clip_written == false) {
            write_str_to_current_page(xps, " Clip=\"");
            xps->in_clip = true;
        }
        goto exit;
    }

    if (!image_brush_fill(type, xps->filltype)) {
        if (type & gx_path_type_fill) {
            if (type == gx_path_type_fill)
                fmt = "Fill=\"#%06X\" Data=\"F 1";
            else
                fmt = "Fill=\"#%06X\" Data=\"";
        }
        else {
            fmt = "Stroke=\"#%06X\" Data=\"";
        }
        gs_snprintf(line, sizeof(line), fmt, c);
        write_str_to_current_page(xps, line);
    }
    else {
        if ( image_brush_fill(type, xps->filltype))
            write_str_to_current_page(xps, "<Path Data=\"");
        else
            write_str_to_current_page(xps, " Data=\"");
    }

exit:
    if_debug1m('_', xps->memory, "xps_beginpath %s\n", line);

    return 0;
}

static int
xps_moveto(gx_device_vector *vdev, double x0, double y0,
           double x, double y, gx_path_type_t type)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;
    char line[300];

    if_debug2m('_', xps->memory, "xps_moveto %g %g\n", x, y);

    /* skip non-drawing paths for now */
    if (!drawing_path(type, xps->filltype)) {
        if (type == gx_path_type_none) {
            if (xps->in_path == false) {
                if_debug1m('_', xps->memory, "xps_moveto: type not supported %x\n", type);
                return 0;
            }
        }
    }

    if ((type & gx_path_type_clip || type == gx_path_type_none) && !image_brush_fill(type, xps->filltype)) {
        if (xps->in_path == false || xps->clip_written)
            return 0;
    }
    gs_snprintf(line, sizeof(line), " M %g,%g", x, y);
    write_str_to_current_page(xps, line);
    if_debug1m('_', xps->memory, "xps_moveto %s", line);
    return 0;
}

static int
xps_lineto(gx_device_vector *vdev, double x0, double y0,
           double x, double y, gx_path_type_t type)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;
    char line[200];

    if_debug2m('_', xps->memory, "xps_lineto %g %g\n", x, y);

    /* skip non-drawing paths for now */
    if (!drawing_path(type, xps->filltype)) {
        if (type == gx_path_type_none) {
            if (xps->in_path == false) {
                if_debug1m('_', xps->memory, "xps_lineto: type not supported %x\n", type);
                return 0;
            }
        }
    }

    if ((type & gx_path_type_clip || type == gx_path_type_none) && !image_brush_fill(type, xps->filltype)) {
        if (xps->in_path == false || xps->clip_written)
            return 0;
    }

    gs_snprintf(line, sizeof(line), " L %g,%g", x, y);
    write_str_to_current_page(xps, line);
    if_debug1m('_', xps->memory, "xps_lineto %s\n", line);
    return 0;
}

static int
xps_curveto(gx_device_vector *vdev, double x0, double y0,
            double x1, double y1, double x2, double y2,
            double x3, double y3, gx_path_type_t type)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;
    char line[200];

    /* skip non-drawing paths for now */
    if (!drawing_path(type, xps->filltype)) {
        if (type == gx_path_type_none) {
            if (xps->in_path == false) {
                if_debug1m('_', xps->memory, "xps_curveto: type not supported %x\n", type);
                return 0;
            }
        }
    }

    if ((type & gx_path_type_clip || type == gx_path_type_none) && !image_brush_fill(type, xps->filltype)) {
        if (xps->in_path == false || xps->clip_written)
            return 0;
    }

    gs_snprintf(line, sizeof(line), " C %g,%g %g,%g %g,%g", x1, y1,
            x2,y2,x3,y3);
    write_str_to_current_page(xps,line);
    if_debug1m('_', xps->memory, "xps_curveto %s\n", line);

    return 0;
}

static int
xps_closepath(gx_device_vector *vdev, double x, double y,
              double x_start, double y_start, gx_path_type_t type)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;

    /* skip non-drawing paths for now */
    if (!drawing_path(type, xps->filltype)) {
        if (type == gx_path_type_none) {
            if (xps->in_path == false) {
                if_debug1m('_', xps->memory, "xps_closepath: type not supported %x\n", type);
                return 0;
            }
        }
    }

    if ((type & gx_path_type_clip || type == gx_path_type_none) && !image_brush_fill(type, xps->filltype)) {
        if (xps->in_path == false || xps->clip_written)
            return 0;
    }

    write_str_to_current_page(xps, " Z");
    if_debug0m('_', xps->memory, "xps_closepath");

    return 0;
}

static int
xps_endpath(gx_device_vector *vdev, gx_path_type_t type)
{
    gx_device_xps *xps = (gx_device_xps *)vdev;
    char line[200];
    const char *fmt;

    if (xps->in_clip) {
        xps->in_clip = false;
        xps->clip_written = true;
        if (type & gx_path_type_clip) {
            if (xps->in_path == false)
                return 0;
        }
    } else {
        if (type & gx_path_type_clip && !image_brush_fill(type, xps->filltype)) {
            if (xps->in_path == false || xps->clip_written)
                return 0;
        }
    }

    if (image_brush_fill(type, xps->filltype)) {
        write_str_to_current_page(xps, "\" >\n");
        /* And now the rest of the details */
        xps_finish_image_path(vdev);
    } else if (type & gx_path_type_stroke) {
        /* NB format width. */
        fmt = "\" StrokeThickness=\"%g\" ";
        gs_snprintf(line, sizeof(line), fmt, xps->linewidth);
        write_str_to_current_page(xps, line);
        switch(xps->linecap) {
            case gs_cap_round:
                gs_snprintf(line, sizeof(line), "StrokeStartLineCap=\"Round\" StrokeEndLineCap=\"Round\" ");
                write_str_to_current_page(xps, line);
                break;
            case gs_cap_square:
                gs_snprintf(line, sizeof(line), "StrokeStartLineCap=\"Square\" StrokeEndLineCap=\"Square\" ");
                write_str_to_current_page(xps, line);
                break;
            case gs_cap_triangle:
                gs_snprintf(line, sizeof(line), "StrokeStartLineCap=\"Triangle\" StrokeEndLineCap=\"Triangle\" ");
                write_str_to_current_page(xps, line);
                break;
            case gs_cap_butt:
            case gs_cap_unknown:
            default:
                break;
        }
        switch(xps->linejoin) {
            case gs_join_round:
                gs_snprintf(line, sizeof(line), "StrokeLineJoin=\"Round\" ");
                write_str_to_current_page(xps, line);
                break;
            case gs_join_miter:
                gs_snprintf(line, sizeof(line), "StrokeLineJoin=\"Miter\" ");
                write_str_to_current_page(xps, line);
                gs_snprintf(line, sizeof(line), "StrokeMiterLimit=\"%g\" ", xps->miterlimit);
                write_str_to_current_page(xps, line);
                break;
            case gs_join_bevel:
                gs_snprintf(line, sizeof(line), "StrokeLineJoin=\"Bevel\" ");
                write_str_to_current_page(xps, line);
                break;
            case gs_join_none:
            case gs_join_triangle:
            case gs_join_unknown:
            default:
                break;
        }
    } else { /* fill */
        /* close the path data attribute */
        write_str_to_current_page(xps, " Z\" ");
    }

    return 0;
}

/* Image handling */
static image_enum_proc_plane_data(xps_image_data);
static image_enum_proc_end_image(xps_image_end_image);
static const gx_image_enum_procs_t xps_image_enum_procs = {
    xps_image_data, xps_image_end_image
};

/* High level image support */
/* Prototypes */
static TIFF* tiff_from_name(gx_device_xps *dev, const char *name, int big_endian,
    bool usebigtiff);
static int tiff_set_values(xps_image_enum_t *pie, TIFF *tif,
                            cmm_profile_t *profile, bool force8bit);
static void xps_tiff_set_handlers(void);
static void xps_tiff_cleanup(xps_image_enum_t *xpie);

/* Check if we have the ICC profile in the package */
static xps_icc_data_t*
xps_find_icc(const gx_device_xps *xdev, cmm_profile_t *icc_profile)
{
    xps_icc_data_t *icc_data = xdev->icc_data;

    while (icc_data != NULL) {
        if (icc_data->hash == gsicc_get_hash(icc_profile)) {
            return icc_data;
        }
        icc_data = icc_data->next;
    }
    return NULL;
}

static int
xps_create_icc_name(const gx_device_xps *xps_dev, cmm_profile_t *profile, char *name)
{
    xps_icc_data_t *icc_data;

    icc_data = xps_find_icc(xps_dev, profile);
    if (icc_data == NULL)
        return gs_throw_code(gs_error_rangecheck);  /* Should be there */

    snprintf(name, MAXNAME, "%sProfile_%d.icc", PROFILEPATH, icc_data->index);
    return 0;
}

static void
xps_create_image_name(gx_device *dev, char *name)
{
    gx_device_xps *const xdev = (gx_device_xps *)dev;

    snprintf(name, MAXNAME, "%s%d.tif", IMAGEPATH, xdev->image_count);
    xdev->image_count++;
}

static int
xps_add_icc_relationship(xps_image_enum_t *pie)
{
    gx_device_xps *xps = (gx_device_xps*) (pie->dev);
    int code;

    code = add_new_relationship(xps, pie->icc_name);
    if (code < 0)
        return gs_rethrow_code(code);

    return 0;
}

static int
xps_add_image_relationship(xps_image_enum_t *pie)
{
    gx_device_xps *xps = (gx_device_xps*) (pie->dev);
    int code;

    code = add_new_relationship(xps, pie->file_name);
    if (code < 0)
        return gs_rethrow_code(code);
    return 0;
}

static int
xps_write_profile(const gs_gstate *pgs, char *name, cmm_profile_t *profile, gx_device_xps *xps_dev)
{
    byte *profile_buffer;
    int size;

    /* Need V2 ICC Profile */
    profile_buffer = gsicc_create_getv2buffer(pgs, profile, &size);

    /* Now go ahead and add to the zip archive */
    return add_data_to_zip_file(xps_dev, name, profile_buffer, size);
}

static int
xps_begin_typed_image(gx_device               *dev,
                const gs_gstate               *pgs,
                const gs_matrix               *pmat,
                const gs_image_common_t       *pic,
                const gs_int_rect             *prect,
                const gx_drawing_color        *pdcolor,
                const gx_clip_path            *pcpath,
                      gs_memory_t             *mem,
                      gx_image_enum_common_t **pinfo)
{
    gx_device_vector *vdev = (gx_device_vector *)dev;
    gx_device_xps *xdev = (gx_device_xps *)dev;
    const gs_image_t *pim = (const gs_image_t *)pic;
    gs_color_space *pcs;
    xps_image_enum_t *pie = NULL;
    xps_icc_data_t *icc_data;
    gs_matrix mat;
    int code;
    gx_clip_path cpath;
    gs_fixed_rect bbox;
    int bits_per_pixel;
    int num_components;
    size_t bsize;
    cmm_profile_t *icc_profile = NULL;
    gs_color_space_index csindex;
    float index_decode[2];
    gsicc_rendering_param_t rendering_params;
    bool force8bit = false;

    if (pic->type->index != 1)
        goto use_default;

    pcs = pim->ColorSpace;
    /* No image mask yet.  Also, need a color space */
    if (pcs == NULL || ((const gs_image1_t *)pim)->ImageMask)
        goto use_default;

    /* No indexed images that are not 8 bit. */
    csindex = gs_color_space_get_index(pcs);
    if (csindex == gs_color_space_index_Indexed && pim->BitsPerComponent != 8)
        goto use_default;

    /* Also need  gs_gstate for these color spaces */
    if (pgs == NULL && (csindex == gs_color_space_index_Indexed ||
        csindex == gs_color_space_index_Separation ||
        csindex == gs_color_space_index_DeviceN))
        goto use_default;

    if (gs_matrix_invert(&pim->ImageMatrix, &mat) < 0)
        goto use_default;
    if (pmat == NULL)
        pmat = &ctm_only(pgs);
    if (pgs)
        gs_matrix_multiply(&mat, pmat, &mat);

    pie = gs_alloc_struct(mem, xps_image_enum_t, &st_xps_image_enum,
                          "xps_begin_image");
    if (pie == 0)
        return_error(gs_error_VMerror);
    pie->buffer = NULL;
    pie->devc_buffer = NULL;
    pie->pgs = NULL;
    pie->tif = NULL;

    /* Set the brush types to image */
    xps_setstrokebrush(xdev, xps_imagebrush);
    xps_setfillbrush(xdev, xps_imagebrush);
    pie->mat = mat;
    xdev->xps_pie = pie;
    /* We need this set a bit early for the ICC relationship writing */
    pie->dev = (gx_device*) xdev;

    /* If the color space is DeviceN, Sep or indexed these end up getting
       mapped to the color space defined by the device profile.  XPS only
       support RGB indexed images so we just expand if for now. ICC link
       creation etc is handled during the remap/concretization of the colors */
    if (csindex == gs_color_space_index_Indexed ||
        csindex == gs_color_space_index_Separation ||
        csindex == gs_color_space_index_DeviceN) {
        cmm_dev_profile_t *dev_profile;
        pie->pcs = pcs;
        rc_increment(pcs);
        code = dev_proc(dev, get_profile)(dev, &(dev_profile));
        /* Just use the "default" profile for now */
        icc_profile = dev_profile->device_profile[GS_DEFAULT_DEVICE_PROFILE];
        force8bit = true; /* Output image is 8 bit regardless of source */
    } else {
        /* An ICC, RGB, CMYK, Gray color space */
        pie->pcs = NULL;
        /* Get the ICC profile */
        if (gs_color_space_is_PSCIE(pcs)) {
            if (pcs->icc_equivalent == NULL) {
                bool is_lab;
                if (pgs == NULL) {
                    gs_free_object(mem, *pinfo, "xps_begin_image");
                    return_error(gs_error_invalidaccess);
                }
                gs_colorspace_set_icc_equivalent(pcs, &is_lab, pgs->memory);
            }
            icc_profile = pcs->icc_equivalent->cmm_icc_profile_data;
        } else {
            icc_profile = pcs->cmm_icc_profile_data;
        }
    }

    /* Set up for handling case where we are in CIELAB. In this case, we are
       going out to the default RGB color space */
    if (icc_profile->islab) {
        /* Create the link */
        rendering_params.black_point_comp = gsBLACKPTCOMP_ON;
        rendering_params.graphics_type_tag = GS_IMAGE_TAG;
        rendering_params.override_icc = false;
        rendering_params.preserve_black = gsBKPRESNOTSPECIFIED;
        rendering_params.rendering_intent = gsPERCEPTUAL;
        rendering_params.cmm = gsCMM_DEFAULT;
        if (pgs == NULL) {
            gs_free_object(mem, *pinfo, "xps_begin_image");
            return_error(gs_error_invalidaccess);
        }
        pie->icc_link = gsicc_get_link_profile(pgs, dev, icc_profile,
            pgs->icc_manager->default_rgb, &rendering_params, pgs->memory, false);
        icc_profile = pgs->icc_manager->default_rgb;
    } else {
        pie->icc_link = NULL;
    }

    /* Now we actually write out the image and icc profile data to the zip
      package. Test if profile is already here. If not, add it. */
    if (xps_find_icc(xdev, icc_profile) == NULL) {
        icc_data = (xps_icc_data_t*)gs_alloc_bytes(dev->memory->non_gc_memory,
            sizeof(xps_icc_data_t), "xps_begin_image");
        if (icc_data == NULL) {
            gs_free_object(mem, *pinfo, "xps_begin_image");
            gs_throw(gs_error_VMerror, "Allocation of icc_data failed");
            return_error(gs_error_VMerror);
        }

        icc_data->hash = gsicc_get_hash(icc_profile);
        if (xdev->icc_data == NULL) {
            icc_data->index = 0;
            xdev->icc_data = icc_data;
            xdev->icc_data->next = NULL;
        } else {
            icc_data->next = xdev->icc_data;
            icc_data->index = icc_data->next->index + 1;
            xdev->icc_data = icc_data;
        }

        /* Get name for mark up and for relationship. Have to wait and do
           this after it is added to the package */
        code = xps_create_icc_name(xdev, icc_profile, &(pie->icc_name[0]));
        if (code < 0) {
            gs_free_object(mem, *pinfo, "xps_begin_image");
            return_error(gs_rethrow_code(code));
        }

        /* Add profile to the package. Here like images we are going to write
           the data now.  Rather than later. */
        if (pgs == NULL) {
            gs_free_object(mem, *pinfo, "xps_begin_image");
            return_error(gs_error_invalidaccess);
        }
        code = xps_write_profile(pgs, &(pie->icc_name[0]), icc_profile, xdev);
        if (code < 0) {
            gs_free_object(mem, *pinfo, "xps_begin_image");
            return_error(gs_rethrow_code(code));
        }

        /* Add ICC relationship */
        xps_add_icc_relationship(pie);
    } else {
        /* Get name for mark up.  We already have it in the resource list */
        code = xps_create_icc_name(xdev, icc_profile, &(pie->icc_name[0]));
        if (code < 0) {
            gs_free_object(mem, *pinfo, "xps_begin_image");
            return_error(gs_rethrow_code(code));
        }

        /* Add ICC relationship.  It may not yet be present for this page. */
        xps_add_icc_relationship(pie);
    }

    /* Get image name for mark up */
    xps_create_image_name(dev, &(pie->file_name[0]));
    /* Set width and height here */
    pie->width = pim->Width;
    pie->height = pim->Height;

    if (pcpath == NULL) {
        (*dev_proc(dev, get_clipping_box)) (dev, &bbox);
        gx_cpath_init_local(&cpath, dev->memory);
        code = gx_cpath_from_rectangle(&cpath, &bbox);
        if (code < 0) {
            gs_free_object(mem, *pinfo, "xps_begin_image");
            return_error(gs_rethrow_code(code));
        }
        pcpath = &cpath;
    } else {
        /* Force vector device to do new path as the clip path is the image
           path.  I had a case where the clip path ids were the same but the
           CTM was changing which resulted in subsequent images coming up
           missing on the page. i.e. only the first one was shown. */
        ((gx_device_vector*) vdev)->clip_path_id = vdev->no_clip_path_id;
    }

    if (pgs == NULL) {
        gs_free_object(mem, *pinfo, "xps_begin_image");
        return_error(gs_error_invalidaccess);
    }
    code = gdev_vector_begin_image(vdev, pgs, pim, pim->format, prect,
        pdcolor, pcpath, mem, &xps_image_enum_procs,
        (gdev_vector_image_enum_t *)pie);
    if (code < 0) {
        gs_free_object(mem, pie, "xps_begin_image");
        return_error(gs_rethrow_code(code));
    }

    if ((pie->tif = tiff_from_name(xdev, pie->file_name, false, false)) == NULL) {
        gs_free_object(mem, pie, "xps_begin_image");
        return_error(gs_error_VMerror);
    }

    /* Null out pie.  Only needed for the above vector command and tiff set up */
    xdev->xps_pie = NULL;
    xps_tiff_set_handlers();
    code = tiff_set_values(pie, pie->tif, icc_profile, force8bit);
    if (code < 0) {
        gs_free_object(mem, pie, "xps_begin_image");
        return_error(gs_rethrow_code(code));
    }
    code = TIFFCheckpointDirectory(pie->tif);

    num_components = gs_color_space_num_components(pcs);
    bits_per_pixel = pim->BitsPerComponent * num_components;

    {
        /* This is a really hacky attempt to avoid running out of memory. This is
         * inspired by various OSS-fuzz bugs but in particular 53398. This device
         * uses the libtiff library to write images into the XPS file, libtiff won't
         * let us use our own memory manager and have rejected patches to allow it
         * to do so, so it uses system memory. If we have a badly broken file we
         * might end up asking it to write a ridiculously large image which will
         * cause it to eat all system memory. So here we try to limit it to any pre-defined
         * limit. Also, if the width * height * 24 bits (RGB) goes negative then we know
         * we've exceeded 2^(64 - 1) bytes, which is unreasonable too.
         */
        int64_t memory_needed = (int64_t)pim->Width * (int64_t)pim->Height * 3;
        gs_memory_status_t status;

        if (memory_needed < 0) {
            gs_free_object(mem, pie, "xps_begin_image");
            return_error(gs_error_VMerror);
        }

        gs_memory_status(dev->memory->gs_lib_ctx->memory, &status);
        if (status.limit < (size_t)~1) {
            if ( memory_needed > status.limit) {
                gs_free_object(mem, pie, "xps_begin_image");
                return_error(gs_error_VMerror);
            }
        }
    }

    pie->decode_st.bps = bits_per_pixel / num_components;
    pie->bytes_comp = (pie->decode_st.bps > 8 ? 2 : 1);
    pie->decode_st.spp = num_components;
    pie->decode_st.unpack = NULL;
    get_unpack_proc((gx_image_enum_common_t*)pie, &(pie->decode_st), pim->format,
        pim->Decode);
    if (pie->decode_st.unpack == NULL){
        gs_free_object(mem, pie, "xps_begin_image");
        return_error(gs_rethrow_code(gs_error_rangecheck));
    }

    /* The decode mapping for index colors needs an adjustment */
    if (csindex == gs_color_space_index_Indexed) {
        if (pim->Decode[0] == 0 &&
            pim->Decode[1] == 255) {
            index_decode[0] = 0;
            index_decode[1] = 1.0;
        } else {
            index_decode[0] = pim->Decode[0];
            index_decode[1] = pim->Decode[1];
        }
        get_map(&(pie->decode_st), pim->format, index_decode);
    } else {
        get_map(&(pie->decode_st), pim->format, pim->Decode);
    }

    /* Allocate our decode buffer. */
    bsize = ((pie->decode_st.bps > 8 ? (pim->Width) * 2 : pim->Width) + 15) * num_components;
    pie->buffer = gs_alloc_bytes(mem, bsize, "xps_begin_typed_image(buffer)");
    if (pie->buffer == 0) {
        gs_free_object(mem, pie, "xps_begin_typed_image");
        *pinfo = NULL;
        return_error(gs_error_VMerror);
    }

    /* If needed, allocate our device color buffer.  We will always do 8 bit here */
    if (csindex == gs_color_space_index_Indexed ||
        csindex == gs_color_space_index_Separation ||
        csindex == gs_color_space_index_DeviceN) {
        bsize = ((unsigned int)pim->Width + 15) * icc_profile->num_comps;
        pie->devc_buffer = gs_alloc_bytes(mem, bsize, "xps_begin_typed_image(devc_buffer)");
        if (pie->devc_buffer == 0) {
            gs_free_object(mem, pie, "xps_begin_typed_image");
            *pinfo = NULL;
            return_error(gs_error_VMerror);
        }
    }

    /* Also, the color remaps need the gs_gstate */
    pie->pgs = pgs;
    if (pgs != NULL)
        pie->pgs_level = pgs->level;

    *pinfo = (gx_image_enum_common_t *)pie;
    return 0;

use_default:
    return gx_default_begin_typed_image(dev, pgs, pmat, pic, prect,
                                        pdcolor, pcpath, mem, pinfo);
}

/* Handles conversion from decoded DeviceN, Sep or Indexed space to Device color
   space. The encoding specified by the image object is already handled at this
   point. Slow due to the multitude of conversions that take place.  I.e. conv to
   float, frac and back to byte, but it will get the job done. Since we can have
   indexed spaces that reference DeviceN spaces etc, we really have to do it
   this way or code up a bunch of optimized special cases.  Note here we always
   output 8 bit regardless of input */
static int
set_device_colors(xps_image_enum_t *pie)
{
    gx_device *pdev = pie->dev;
    const gs_gstate *pgs = pie->pgs;
    gs_color_space *pcs = pie->pcs;
    byte *src = pie->buffer;
    byte *des = pie->devc_buffer;
    int num_src = gs_color_space_num_components(pcs);
    int num_des = pdev->color_info.num_components;
    int width = pie->width;
    cs_proc_remap_color((*remap_color)) = pcs->type->remap_color;
    int i, j, code = 0;
    gs_client_color cc;
    gx_device_color devc;
    gx_color_value cm_values[GX_DEVICE_COLOR_MAX_COMPONENTS];
    float scale = 1.0;

    if (pie->decode_st.bps > 8) {
        unsigned short *src_ptr = (unsigned short*)src;
        int pos_src = 0;
        int pos_des = 0;
        for (i = 0; i < width; i++) {
            for (j = 0; j < num_src; j++, pos_src++) {
                cc.paint.values[j] = (float)(src_ptr[pos_src]) / 65535.0;
            }
            code = remap_color(&cc, pcs, &devc, pgs, pdev, gs_color_select_source);
            dev_proc(pdev, decode_color)(pdev, devc.colors.pure, cm_values);
            for (j = 0; j < num_des; j++, pos_des++) {
                des[pos_des] = (cm_values[j] >> 8);
            }
        }
    } else {
        int pos_src = 0;
        int pos_des = 0;
        if (gs_color_space_get_index(pcs) != gs_color_space_index_Indexed)
            scale = 255.0;
        for (i = 0; i < width; i++) {
            for (j = 0; j < num_src; j++, pos_src++) {
                cc.paint.values[j] = (float)(src[pos_src]) / scale;
            }
            code = remap_color(&cc, pcs, &devc, pgs, pdev, gs_color_select_source);
            dev_proc(pdev, decode_color)(pdev, devc.colors.pure, cm_values);
            for (j = 0; j < num_des; j++, pos_des++) {
                des[pos_des] = (cm_values[j] >> 8);
            }
        }
    }
    return code;
}

/* Chunky or planar in and chunky out */
static int
xps_image_data(gx_image_enum_common_t *info,
const gx_image_plane_t *planes, int height, int *rows_used)
{
    xps_image_enum_t *pie = (xps_image_enum_t *)info;
    int data_bit = planes[0].data_x * info->plane_depths[0];
    int width_bits = pie->width * info->plane_depths[0];
    int bytes_comp = pie->bytes_comp;
    int i, plane;
    int code = 0;
    int width = pie->width;
    int num_planes = pie->num_planes;
    int dsize = (((width + (planes[0]).data_x) * pie->decode_st.spp *
        pie->decode_st.bps / num_planes + 7) >> 3);
    void *bufend = (void*)(pie->buffer + width * bytes_comp * pie->decode_st.spp);
    byte *outbuffer;

    if (info->pgs != NULL && info->pgs->level < info->pgs_level)
        return_error(gs_error_undefinedresult);

    if (width_bits != pie->bits_per_row || (data_bit & 7) != 0)
        return_error(gs_error_rangecheck);
    if (height > pie->height - pie->y)
        height = pie->height - pie->y;

    for (i = 0; i < height; pie->y++, i++) {
        int pdata_x;
        /* Plane zero done here to get the pointer to the data */
        const byte *data_ptr = planes[0].data + planes[0].raster * i + (data_bit >> 3);
        byte *des_ptr = pie->buffer;
        byte *buffer = (byte *)(*pie->decode_st.unpack)(des_ptr, &pdata_x,
            data_ptr, 0, dsize, &(pie->decode_st.map[0]),
            pie->decode_st.spread, pie->decode_st.spp);

        /* Step through the planes having decode do the repack to chunky as
           well as any decoding needed */
        for (plane = 1; plane < num_planes; plane++) {
            data_ptr = planes[plane].data + planes[plane].raster * i + (data_bit >> 3);
            des_ptr = pie->buffer + plane * pie->bytes_comp;
            /* This does the planar to chunky conversion */
            (*pie->decode_st.unpack)(des_ptr, &pdata_x,
                data_ptr, 0, dsize, &(pie->decode_st.map[plane]),
                pie->decode_st.spread, pie->decode_st.spp);
        }

        /* CIELAB does not get mapped.  Handled in color management */
        if (pie->icc_link == NULL) {
            pie->decode_st.applymap(pie->decode_st.map, (void*)buffer,
                pie->decode_st.spp, (void*)pie->buffer, bufend);
            /* Index, Sep and DeviceN are mapped to color space defined by
            device profile */
            if (pie->pcs != NULL) {
                /* In device color space */
                code = set_device_colors(pie);
                if (code < 0)
                    return gs_rethrow_code(code);
                outbuffer = pie->devc_buffer;
            } else {
                /* In source color space */
                outbuffer = pie->buffer;
            }
        } else {
            /* CIELAB to default RGB */
            gsicc_bufferdesc_t input_buff_desc;
            gsicc_bufferdesc_t output_buff_desc;
            gsicc_init_buffer(&input_buff_desc, 3, bytes_comp,
                false, false, false, 0, width * bytes_comp * 3,
                1, width);
            gsicc_init_buffer(&output_buff_desc, 3, bytes_comp,
                false, false, false, 0, width * bytes_comp * 3,
                1, width);
            code = (pie->icc_link->procs.map_buffer)(pie->dev, pie->icc_link,
                &input_buff_desc, &output_buff_desc, (void*)buffer,
                (void*)pie->buffer);
            if (code < 0)
                return code;
            outbuffer = pie->buffer;
        }
        code = TIFFWriteScanline(pie->tif, outbuffer, pie->y, 0);
        if (code < 0)
            return code;
    }
    *rows_used = height;
    return pie->y >= pie->height;
}

static int
xps_add_tiff_image(xps_image_enum_t *pie)
{
    gx_device_xps *xdev = (gx_device_xps *)(pie->dev);
    int code;

    code = add_file_to_zip_file(xdev, pie->file_name, pie->fid);
    gp_fclose(pie->fid);
    return code;
}

/* Clean up by releasing the buffers. */
static int
xps_image_end_image(gx_image_enum_common_t * info, bool draw_last)
{
    xps_image_enum_t *pie = (xps_image_enum_t *)info;
    int code = 0;

    /* N.B. Write the final strip, if any. */

    code = TIFFWriteDirectory(pie->tif);
    xps_tiff_cleanup(pie);

    /* Stuff the image into the zip archive and close the file */
    code = xps_add_tiff_image(pie);
    if (code < 0)
        goto exit;

    /* Reset the brush type to solid */
    xps_setstrokebrush((gx_device_xps *) (pie->dev), xps_solidbrush);
    xps_setfillbrush((gx_device_xps *) (pie->dev), xps_solidbrush);

    /* Add the image relationship */
    code = xps_add_image_relationship(pie);

    gs_free_object(pie->memory, pie, "xps_image_end_image");
exit:
    return code;
}

/* Tiff related code so that we can output all the image data in Tiff format.
   Tiff has the advantage of supporting Gray, RGB, CMYK as well as multiple
   bit depts and having lossless compression.  Much of this was borrowed from
   gstiffio.c */
#define TIFF_PRINT_BUF_LENGTH 1024
static const char tifs_msg_truncated[] = "\n*** Previous line has been truncated.\n";

static int
tiff_set_values(xps_image_enum_t *pie, TIFF *tif, cmm_profile_t *profile,
                bool force8bit)
{
    int bits = 8;

    TIFFSetField(tif, TIFFTAG_ROWSPERSTRIP, pie->height);
    TIFFSetField(tif, TIFFTAG_IMAGEWIDTH, pie->width);
    TIFFSetField(tif, TIFFTAG_IMAGELENGTH, pie->height);
    TIFFSetField(tif, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT);
    TIFFSetField(tif, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG);
    TIFFSetField(tif, TIFFTAG_COMPRESSION, COMPRESSION_LZW);
    TIFFSetField(tif, TIFFTAG_FILLORDER, FILLORDER_MSB2LSB);
    TIFFSetField(tif, TIFFTAG_XRESOLUTION, 96.0);
    TIFFSetField(tif, TIFFTAG_YRESOLUTION, 96.0);

    switch (profile->data_cs) {
        case  gsGRAY:
            if (pie->bits_per_pixel > 8 && !force8bit)
                bits = 16;
            TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, bits);
            TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_MINISBLACK);
            TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, 1);
            break;
        case  gsRGB:
        case gsCIELAB:
            if ((pie->num_planes > 1 && pie->bits_per_pixel > 8 && !force8bit) ||
                (pie->num_planes == 1 && pie->bits_per_pixel / 3 > 8 && !force8bit))
                bits = 16;
            TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, bits);
            TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_RGB);
            TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, 3);
            break;
        case gsCMYK:
            if ((pie->num_planes > 1 && pie->bits_per_pixel > 8 && !force8bit) ||
                (pie->num_planes == 1 && pie->bits_per_pixel / 4 > 8 && !force8bit))
                bits = 16;
            TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, bits);
            TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_SEPARATED);
            TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, 4);
            break;
        default:
            return gs_throw_code(gs_error_rangecheck);
    }
    return 0;
}

/* place to hold the data for our libtiff i/o hooks */
typedef struct tifs_io_xps_t
{
    gx_device_xps *pdev;
    gp_file *fid;
} tifs_io_xps;

/* libtiff i/o hooks */
static size_t
xps_tifsWriteProc(thandle_t fd, void* buf, size_t size)
{
    tifs_io_xps *tiffio = (tifs_io_xps *)fd;
    size_t size_io = (size_t)size;
    gp_file *fid = tiffio->fid;
    size_t count;

    if ((size_t)size_io != size) {
        return (size_t)-1;
    }

    if (fid == NULL)
        return gs_throw_code(gs_error_Fatal);

    count = gp_fwrite(buf, 1, size, fid);
    if (count != size) {
        gp_fclose(fid);
        return gs_rethrow_code(-1);
    }
    gp_fflush(fid);
    return size;
}

static uint64_t
xps_tifsSeekProc(thandle_t fd, uint64_t off, int origin)
{
    tifs_io_xps *tiffio = (tifs_io_xps *)fd;
    gs_offset_t off_io = (gs_offset_t)off;
    gp_file *fid = tiffio->fid;

    if ((uint64_t)off_io != off) {
        return (uint64_t)-1;
    }

    if (fid == NULL && off == 0)
        return 0;

    if (fid == NULL)
        return (uint64_t)-1;

    if (gp_fseek(fid, (gs_offset_t)off, origin) < 0) {
        return (uint64_t)-1;
    }
    return (gp_ftell(fid));
}

static int
xps_tifsCloseProc(thandle_t fd)
{
    tifs_io_xps *tiffio = (tifs_io_xps *)fd;
    gx_device_xps *pdev = tiffio->pdev;

    gs_free(pdev->memory->non_gc_memory, tiffio, sizeof(tifs_io_xps), 1,
        "xps_tifsCloseProc");
    return 0;
}

static int
xps_tifsDummyMapProc(thandle_t fd, void** pbase, toff_t* psize)
{
    (void)fd;
    (void)pbase;
    (void)psize;
    return (0);
}

static void
xps_tifsDummyUnmapProc(thandle_t fd, void* base, toff_t size)
{
    (void)fd;
    (void)base;
    (void)size;
}

static size_t
xps_tifsReadProc(thandle_t fd, void* buf, size_t size)
{
    size_t size_io = (size_t)size;

    if ((size_t)size_io != size) {
        return (size_t)-1;
    }
    return 0;
}

/* Could not see where this was getting used so basically a dummy proc
   for now. */
static uint64_t
xps_tifsSizeProc(thandle_t fd)
{
    uint64_t length = 0;

    return length;
}

static void
xps_tifsWarningHandlerEx(thandle_t client_data, const char *module,
                         const char *fmt, va_list ap)
{
    tifs_io_xps *tiffio = (tifs_io_xps *)client_data;
    gx_device_xps *pdev = tiffio->pdev;
    int count;
    char buf[TIFF_PRINT_BUF_LENGTH];

    count = vsnprintf(buf, sizeof(buf), fmt, ap);
    if (count >= sizeof(buf) || count < 0)  { /* C99 || MSVC */
        dmlprintf1(pdev->memory, "%s", buf);
        dmlprintf1(pdev->memory, "%s\n", tifs_msg_truncated);
    }
    else {
        dmlprintf1(pdev->memory, "%s\n", buf);
    }
}

static void
xps_tifsErrorHandlerEx(thandle_t client_data, const char *module,
                       const char *fmt, va_list ap)
{
    tifs_io_xps *tiffio = (tifs_io_xps *)client_data;
    gx_device_xps *pdev = tiffio->pdev;
    const char *max_size_error = "Maximum TIFF file size exceeded";
    int count;
    char buf[TIFF_PRINT_BUF_LENGTH];

    count = vsnprintf(buf, sizeof(buf), fmt, ap);
    if (count >= sizeof(buf) || count < 0)  { /* C99 || MSVC */
        dmlprintf1(pdev->memory, "%s\n", buf);
        dmlprintf1(pdev->memory, "%s", tifs_msg_truncated);
    }
    else {
        dmlprintf1(pdev->memory, "%s\n", buf);
    }

#if (TIFFLIB_VERSION >= 20111221)
    if (!strncmp(fmt, max_size_error, strlen(max_size_error))) {
        dmlprintf(pdev->memory, "Use -dUseBigTIFF(=true) for BigTIFF output\n");
    }
#endif
}

static void
xps_tiff_set_handlers(void)
{
    (void)TIFFSetErrorHandler(NULL);
    (void)TIFFSetWarningHandler(NULL);
    (void)TIFFSetErrorHandlerExt(xps_tifsErrorHandlerEx);
    (void)TIFFSetWarningHandlerExt(xps_tifsWarningHandlerEx);
}

static TIFF *
tiff_from_name(gx_device_xps *dev, const char *name, int big_endian, bool usebigtiff)
{
    char mode[5] = "w";
    int modelen = 1;
    TIFF *t;
    tifs_io_xps *tiffio;
    gs_memory_t *mem = dev->memory->non_gc_memory;
    char *filename;

    if (big_endian)
        mode[modelen++] = 'b';
    else
        mode[modelen++] = 'l';

    if (usebigtiff)
        /* this should never happen for libtiff < 4.0 - see tiff_put_some_params() */
        mode[modelen++] = '8';

    mode[modelen] = (char)0;

    tiffio = (tifs_io_xps *)gs_malloc(dev->memory->non_gc_memory,
        sizeof(tifs_io_xps), 1, "tiff_from_name");
    if (!tiffio) {
        return NULL;
    }
    tiffio->pdev = dev;

    filename = (char *)gs_alloc_bytes(mem, gp_file_name_sizeof,
        "tiff_from_name(filename)");
    if (!filename)
        return NULL;

    tiffio->fid = gp_open_scratch_file_rm(mem, "tif-", filename, "wb+");
    dev->xps_pie->fid = tiffio->fid;  /* We will be closing it from here */

    gs_free_object(mem, filename, "tiff_from_name(filename)");

    t = TIFFClientOpen(name, mode,
        (thandle_t)tiffio, (TIFFReadWriteProc)xps_tifsReadProc,
        (TIFFReadWriteProc)xps_tifsWriteProc, (TIFFSeekProc)xps_tifsSeekProc,
        xps_tifsCloseProc, (TIFFSizeProc)xps_tifsSizeProc, xps_tifsDummyMapProc,
        xps_tifsDummyUnmapProc);
    return t;
}

static void xps_tiff_cleanup(xps_image_enum_t *xpie)
{
    if (xpie->tif != NULL) {
        void *t = TIFFClientdata(xpie->tif);
        TIFFCleanup(xpie->tif);
        xpie->tif = NULL;
        gs_free_object(xpie->dev->memory->non_gc_memory, t, "xps_image_enum_finalize");
    }
}

static void
xps_image_enum_finalize(const gs_memory_t *cmem, void *vptr)
{
    xps_image_enum_t *xpie = (xps_image_enum_t *)vptr;
    gx_device_xps *xdev = (gx_device_xps *)xpie->dev;

    xps_tiff_cleanup(xpie);

    xpie->dev = NULL;
    if (xpie->pcs != NULL)
        rc_decrement(xpie->pcs, "xps_image_end_image (pcs)");
    if (xpie->buffer != NULL)
        gs_free_object(xpie->memory, xpie->buffer, "xps_image_end_image");
    if (xpie->devc_buffer != NULL)
        gs_free_object(xpie->memory, xpie->devc_buffer, "xps_image_end_image");

    /* ICC clean up */
    if (xpie->icc_link != NULL)
        gsicc_release_link(xpie->icc_link);
    xdev->xps_pie = NULL;
}

Coverage Report

Created: 2026-09-14 07:34