/src/mupdf/source/fitz/output-pcl.c

Source (jump to first uncovered line)
// Copyright (C) 2004-2021 Artifex Software, Inc.
//
// This file is part of MuPDF.
//
// MuPDF is free software: you can redistribute it and/or modify it under the
// terms of the GNU Affero General Public License as published by the Free
// Software Foundation, either version 3 of the License, or (at your option)
// any later version.
//
// MuPDF is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
// FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
// details.
//
// You should have received a copy of the GNU Affero General Public License
// along with MuPDF. If not, see <https://www.gnu.org/licenses/agpl-3.0.en.html>
//
// Alternative licensing terms are available from the licensor.
// For commercial licensing, see <https://www.artifex.com/> or contact
// Artifex Software, Inc., 39 Mesa Street, Suite 108A, San Francisco,
// CA 94129, USA, for further information.

#include "mupdf/fitz.h"

#include <limits.h>
#include <stdlib.h>
#include <string.h>

/* Lifted from ghostscript gdevjlm.h */
/*
 * The notion that there is such a thing as a "PCL printer" is a fiction: no
 * two "PCL" printers, even at the same PCL level, have identical command
 * sets. (The H-P documentation isn't fully accurate either; for example,
 * it doesn't reveal that the DeskJet printers implement anything beyond PCL
 * 3.)
 *
 * This file contains feature definitions for a generic monochrome PCL
 * driver (gdevdljm.c), and the specific feature values for all such
 * printers that Ghostscript currently supports.
 */

/* Printer spacing capabilities. Include at most one of these. */
#define PCL_NO_SPACING  0 /* no vertical spacing capability, must be 0 */
#define PCL3_SPACING  1  /* <ESC>*p+<n>Y (PCL 3) */
#define PCL4_SPACING  2  /* <ESC>*b<n>Y (PCL 4) */
#define PCL5_SPACING  4  /* <ESC>*b<n>Y and clear seed row (PCL 5) */
/* The following is only used internally. */
#define PCL_ANY_SPACING \
  (PCL3_SPACING | PCL4_SPACING | PCL5_SPACING)

/* Individual printer properties. Any subset of these may be included. */
#define PCL_MODE_2_COMPRESSION    8  /* compression mode 2 supported */
            /* (PCL 4) */
#define PCL_MODE_3_COMPRESSION    16  /* compression modes 2 & 3 supported */
            /* (PCL 5) */
#define PCL_END_GRAPHICS_DOES_RESET 32  /* <esc>*rB resets all parameters */
#define PCL_HAS_DUPLEX      64  /* <esc>&l<duplex>S supported */
#define PCL_CAN_SET_PAPER_SIZE    128  /* <esc>&l<sizecode>A supported */
#define PCL_CAN_PRINT_COPIES    256  /* <esc>&l<copies>X supported */
#define HACK__IS_A_LJET4PJL   512
#define HACK__IS_A_OCE9050    1024
#define PCL_HAS_ORIENTATION             2048
#define PCL_CAN_SET_CUSTOM_PAPER_SIZE   4096
#define PCL_HAS_RICOH_PAPER_SIZES       8192

/* Shorthands for the most common spacing/compression combinations. */
#define PCL_MODE0 PCL3_SPACING
#define PCL_MODE0NS PCL_NO_SPACING
#define PCL_MODE2 (PCL4_SPACING | PCL_MODE_2_COMPRESSION)
#define PCL_MODE2P (PCL_NO_SPACING | PCL_MODE_2_COMPRESSION)
#define PCL_MODE3 (PCL5_SPACING | PCL_MODE_3_COMPRESSION)
#define PCL_MODE3NS (PCL_NO_SPACING | PCL_MODE_3_COMPRESSION)

#define MIN_SKIP_LINES 7
static const char *const from2to3 = "\033*b3M";
static const char *const from3to2 = "\033*b2M";
static const int penalty_from2to3 = 5; /* strlen(from2to3); */
static const int penalty_from3to2 = 5; /* strlen(from3to2); */

/* Generic */
static const fz_pcl_options fz_pcl_options_generic =
{
  (PCL_MODE2 | PCL_END_GRAPHICS_DOES_RESET | PCL_CAN_SET_PAPER_SIZE | PCL_CAN_SET_CUSTOM_PAPER_SIZE),
  "\033&k1W\033*b2M",
  "\033&k1W\033*b2M"
};

/* H-P DeskJet */
static const fz_pcl_options fz_pcl_options_ljet4 =
{
  (PCL_MODE2 | PCL_END_GRAPHICS_DOES_RESET | PCL_CAN_SET_PAPER_SIZE),
  "\033&k1W\033*b2M",
  "\033&k1W\033*b2M"
};

/* H-P DeskJet 500 */
static const fz_pcl_options fz_pcl_options_dj500 =
{
  (PCL_MODE3 | PCL_END_GRAPHICS_DOES_RESET | PCL_CAN_SET_PAPER_SIZE),
  "\033&k1W",
  "\033&k1W"
};

/* Kyocera FS-600 */
static const fz_pcl_options fz_pcl_options_fs600 =
{
  (PCL_MODE3 | PCL_CAN_SET_PAPER_SIZE | PCL_CAN_PRINT_COPIES),
  "\033*r0F\033&u%dD",
  "\033*r0F\033&u%dD"
};

/* H-P original LaserJet */
/* H-P LaserJet Plus */
static const fz_pcl_options fz_pcl_options_lj =
{
  (PCL_MODE0),
  "\033*b0M",
  "\033*b0M"
};

/* H-P LaserJet IIp, IId */
static const fz_pcl_options fz_pcl_options_lj2 =
{
  (PCL_MODE2P | PCL_CAN_SET_PAPER_SIZE),
  "\033*r0F\033*b2M",
  "\033*r0F\033*b2M"
};

/* H-P LaserJet III* */
static const fz_pcl_options fz_pcl_options_lj3 =
{
  (PCL_MODE3 | PCL_CAN_SET_PAPER_SIZE | PCL_CAN_PRINT_COPIES),
  "\033&l-180u36Z\033*r0F",
  "\033&l-180u36Z\033*r0F"
};

/* H-P LaserJet IIId */
static const fz_pcl_options fz_pcl_options_lj3d =
{
  (PCL_MODE3 | PCL_HAS_DUPLEX | PCL_CAN_SET_PAPER_SIZE | PCL_CAN_PRINT_COPIES),
  "\033&l-180u36Z\033*r0F",
  "\033&l180u36Z\033*r0F"
};

/* H-P LaserJet 4 */
static const fz_pcl_options fz_pcl_options_lj4 =
{
  (PCL_MODE3 | PCL_CAN_SET_PAPER_SIZE | PCL_CAN_PRINT_COPIES),
  "\033&l-180u36Z\033*r0F\033&u%dD",
  "\033&l-180u36Z\033*r0F\033&u%dD"
};

/* H-P LaserJet 4 PL */
static const fz_pcl_options fz_pcl_options_lj4pl =
{
  (PCL_MODE3 | PCL_CAN_SET_PAPER_SIZE | PCL_CAN_PRINT_COPIES | HACK__IS_A_LJET4PJL),
  "\033&l-180u36Z\033*r0F\033&u%dD",
  "\033&l-180u36Z\033*r0F\033&u%dD"
};

/* H-P LaserJet 4d */
static const fz_pcl_options fz_pcl_options_lj4d =
{
  (PCL_MODE3 | PCL_HAS_DUPLEX | PCL_CAN_SET_PAPER_SIZE | PCL_CAN_PRINT_COPIES),
  "\033&l-180u36Z\033*r0F\033&u%dD",
  "\033&l180u36Z\033*r0F\033&u%dD"
};

/* H-P 2563B line printer */
static const fz_pcl_options fz_pcl_options_lp2563b =
{
  (PCL_MODE0NS | PCL_CAN_SET_PAPER_SIZE),
  "\033*b0M",
  "\033*b0M"
};

/* OCE 9050 line printer */
static const fz_pcl_options fz_pcl_options_oce9050 =
{
  (PCL_MODE3NS | PCL_CAN_SET_PAPER_SIZE | HACK__IS_A_OCE9050),
  "\033*b0M",
  "\033*b0M"
};

enum {
  eLetterPaper = 0,
  eLegalPaper,
  eA4Paper,
  eExecPaper,
  eLedgerPaper,
  eA3Paper,
  eCOM10Envelope,
  eMonarchEnvelope,
  eC5Envelope,
  eDLEnvelope,
  eJB4Paper,
  eJB5Paper,
  eB5Envelope,
  eB5Paper,                   /* 2.1 */
  eJPostcard,
  eJDoublePostcard,
  eA5Paper,
  eA6Paper,                   /* 2.0 */
  eJB6Paper,                  /* 2.0 */
  eJIS8K,                     /* 2.1 */
  eJIS16K,                    /* 2.1 */
  eJISExec,                   /* 2.1 */
  eDefaultPaperSize = 96,     /* 2.1 */
  eCustomPaperSize = 101,
  eB6JIS = 201,               /* non-standard, Ricoh printers */
  eC6Envelope = 202,          /* non-standard, Ricoh printers */
  e8Kai  = 203,               /* non-standard, Ricoh printers */
  e16Kai = 204,               /* non-standard, Ricoh printers */
  e12x18 = 205,               /* non-standard, Ricoh printers */
  e13x19_2 = 212,             /* non-standard, Ricoh printers */
  e13x19 = 213,               /* non-standard, Ricoh printers */
  e12_6x19_2 = 214,           /* non-standard, Ricoh printers */
  e12_6x18_5 = 215,           /* non-standard, Ricoh printers */
  e13x18  = 216,              /* non-standard, Ricoh printers */
  eSRA3 = 217,                /* non-standard, Ricoh printers */
  eSRA4 = 218,                /* non-standard, Ricoh printers */
  e226x310 = 219,             /* non-standard, Ricoh printers */
  e310x432 = 220,             /* non-standard, Ricoh printers */
  eEngQuatro = 221,           /* non-standard, Ricoh printers */
  e11x14 = 222,               /* non-standard, Ricoh printers */
  e11x15 = 223,               /* non-standard, Ricoh printers */
  e10x14 = 224,               /* non-standard, Ricoh printers */
};

static void copy_opts(fz_pcl_options *dst, const fz_pcl_options *src)
{
  if (dst)
    *dst = *src;
}

const char *fz_pcl_write_options_usage =
  "PCL output options:\n"
  "\tcolorspace=mono: render 1-bit black and white page\n"
  "\tcolorspace=rgb: render full color page\n"
  "\tpreset=generic|ljet4|dj500|fs600|lj|lj2|lj3|lj3d|lj4|lj4pl|lj4d|lp2563b|oce9050\n"
  "\tspacing=0: No vertical spacing capability\n"
  "\tspacing=1: PCL 3 spacing (<ESC>*p+<n>Y)\n"
  "\tspacing=2: PCL 4 spacing (<ESC>*b<n>Y)\n"
  "\tspacing=3: PCL 5 spacing (<ESC>*b<n>Y and clear seed row)\n"
  "\tmode2: Enable mode 2 graphics compression\n"
  "\tmode3: Enable mode 3 graphics compression\n"
  "\teog_reset: End of graphics (<ESC>*rB) resets all parameters\n"
  "\thas_duplex: Duplex supported (<ESC>&l<duplex>S)\n"
  "\thas_papersize: Papersize setting supported (<ESC>&l<sizecode>A)\n"
  "\thas_copies: Number of copies supported (<ESC>&l<copies>X)\n"
  "\tis_ljet4pjl: Disable/Enable HP 4PJL model-specific output\n"
  "\tis_oce9050: Disable/Enable Oce 9050 model-specific output\n"
  "\n";

void fz_pcl_preset(fz_context *ctx, fz_pcl_options *opts, const char *preset)
{
  if (preset == NULL || *preset == 0 || !strcmp(preset, "generic"))
    copy_opts(opts, &fz_pcl_options_generic);
  else if (!strcmp(preset, "ljet4"))
    copy_opts(opts, &fz_pcl_options_ljet4);
  else if (!strcmp(preset, "dj500"))
    copy_opts(opts, &fz_pcl_options_dj500);
  else if (!strcmp(preset, "fs600"))
    copy_opts(opts, &fz_pcl_options_fs600);
  else if (!strcmp(preset, "lj"))
    copy_opts(opts, &fz_pcl_options_lj);
  else if (!strcmp(preset, "lj2"))
    copy_opts(opts, &fz_pcl_options_lj2);
  else if (!strcmp(preset, "lj3"))
    copy_opts(opts, &fz_pcl_options_lj3);
  else if (!strcmp(preset, "lj3d"))
    copy_opts(opts, &fz_pcl_options_lj3d);
  else if (!strcmp(preset, "lj4"))
    copy_opts(opts, &fz_pcl_options_lj4);
  else if (!strcmp(preset, "lj4pl"))
    copy_opts(opts, &fz_pcl_options_lj4pl);
  else if (!strcmp(preset, "lj4d"))
    copy_opts(opts, &fz_pcl_options_lj4d);
  else if (!strcmp(preset, "lp2563b"))
    copy_opts(opts, &fz_pcl_options_lp2563b);
  else if (!strcmp(preset, "oce9050"))
    copy_opts(opts, &fz_pcl_options_oce9050);
  else
    fz_throw(ctx, FZ_ERROR_ARGUMENT, "Unknown preset '%s'", preset);
}

fz_pcl_options *
fz_parse_pcl_options(fz_context *ctx, fz_pcl_options *opts, const char *args)
{
  const char *val;

  memset(opts, 0, sizeof *opts);

  if (fz_has_option(ctx, args, "preset", &val))
    fz_pcl_preset(ctx, opts, val);
  else
    fz_pcl_preset(ctx, opts, "generic");

  if (fz_has_option(ctx, args, "spacing", &val))
  {
    switch (atoi(val))
    {
    case 0: opts->features &= ~PCL_ANY_SPACING; break;
    case 1: opts->features = (opts->features & ~PCL_ANY_SPACING) | PCL3_SPACING; break;
    case 2: opts->features = (opts->features & ~PCL_ANY_SPACING) | PCL4_SPACING; break;
    case 3: opts->features = (opts->features & ~PCL_ANY_SPACING) | PCL5_SPACING; break;
    default: fz_throw(ctx, FZ_ERROR_ARGUMENT, "Unsupported PCL spacing %d (0-3 only)", atoi(val));
    }
  }
  if (fz_has_option(ctx, args, "mode2", &val))
  {
    if (fz_option_eq(val, "no"))
      opts->features &= ~PCL_MODE_2_COMPRESSION;
    else if (fz_option_eq(val, "yes"))
      opts->features |= PCL_MODE_2_COMPRESSION;
    else
      fz_throw(ctx, FZ_ERROR_ARGUMENT, "Expected 'yes' or 'no' for mode2 value");
  }
  if (fz_has_option(ctx, args, "mode3", &val))
  {
    if (fz_option_eq(val, "no"))
      opts->features &= ~PCL_MODE_3_COMPRESSION;
    else if (fz_option_eq(val, "yes"))
      opts->features |= PCL_MODE_3_COMPRESSION;
    else
      fz_throw(ctx, FZ_ERROR_ARGUMENT, "Expected 'yes' or 'no' for mode3 value");
  }
  if (fz_has_option(ctx, args, "eog_reset", &val))
  {
    if (fz_option_eq(val, "no"))
      opts->features &= ~PCL_END_GRAPHICS_DOES_RESET;
    else if (fz_option_eq(val, "yes"))
      opts->features |= PCL_END_GRAPHICS_DOES_RESET;
    else
      fz_throw(ctx, FZ_ERROR_ARGUMENT, "Expected 'yes' or 'no' for eog_reset value");
  }
  if (fz_has_option(ctx, args, "has_duplex", &val))
  {
    if (fz_option_eq(val, "no"))
      opts->features &= ~PCL_HAS_DUPLEX;
    else if (fz_option_eq(val, "yes"))
      opts->features |= PCL_HAS_DUPLEX;
    else
      fz_throw(ctx, FZ_ERROR_ARGUMENT, "Expected 'yes' or 'no' for has_duplex value");
  }
  if (fz_has_option(ctx, args, "has_papersize", &val))
  {
    if (fz_option_eq(val, "no"))
      opts->features &= ~PCL_CAN_SET_PAPER_SIZE;
    else if (fz_option_eq(val, "yes"))
      opts->features |= PCL_CAN_SET_PAPER_SIZE;
    else
      fz_throw(ctx, FZ_ERROR_ARGUMENT, "Expected 'yes' or 'no' for has_papersize value");
  }
  if (fz_has_option(ctx, args, "has_copies", &val))
  {
    if (fz_option_eq(val, "no"))
      opts->features &= ~PCL_CAN_PRINT_COPIES;
    else if (fz_option_eq(val, "yes"))
      opts->features |= PCL_CAN_PRINT_COPIES;
    else
      fz_throw(ctx, FZ_ERROR_ARGUMENT, "Expected 'yes' or 'no' for has_papersize value");
  }
  if (fz_has_option(ctx, args, "is_ljet4pjl", &val))
  {
    if (fz_option_eq(val, "no"))
      opts->features &= ~HACK__IS_A_LJET4PJL;
    else if (fz_option_eq(val, "yes"))
      opts->features |= HACK__IS_A_LJET4PJL;
    else
      fz_throw(ctx, FZ_ERROR_ARGUMENT, "Expected 'yes' or 'no' for is_ljet4pjl value");
  }
  if (fz_has_option(ctx, args, "is_oce9050", &val))
  {
    if (fz_option_eq(val, "no"))
      opts->features &= ~HACK__IS_A_OCE9050;
    else if (fz_option_eq(val, "yes"))
      opts->features |= HACK__IS_A_OCE9050;
    else
      fz_throw(ctx, FZ_ERROR_ARGUMENT, "Expected 'yes' or 'no' for is_oce9050 value");
  }

  return opts;
}

static void
make_init(fz_pcl_options *pcl, char *buf, unsigned long len, const char *str, int res)
{
  int paper_source = -1;

  fz_snprintf(buf, len, str, res);

  if (pcl->manual_feed_set && pcl->manual_feed)
    paper_source = 2;
  else if (pcl->media_position_set && pcl->media_position >= 0)
    paper_source = pcl->media_position;
  if (paper_source >= 0)
  {
    char buf2[40];
    fz_snprintf(buf2, sizeof(buf2), "\033&l%dH", paper_source);
    strncat(buf, buf2, len);
  }
}

static void
pcl_header(fz_context *ctx, fz_output *out, fz_pcl_options *pcl, int num_copies, int xres, int yres, int w, int h)
{
  char odd_page_init[80];
  char even_page_init[80];

  make_init(pcl, odd_page_init, sizeof(odd_page_init), pcl->odd_page_init, xres);
  make_init(pcl, even_page_init, sizeof(even_page_init), pcl->even_page_init, xres);

  if (pcl->page_count == 0)
  {
    if (pcl->features & HACK__IS_A_LJET4PJL)
      fz_write_string(ctx, out, "\033%-12345X@PJL\r\n@PJL ENTER LANGUAGE = PCL\r\n");
    fz_write_string(ctx, out, "\033E"); /* reset printer */
    /* Reset the margins */
    fz_write_string(ctx, out, "\033&10e-180u36Z");
    /* If the printer supports it, set orientation */
    if (pcl->features & PCL_HAS_ORIENTATION)
    {
      fz_write_printf(ctx, out, "\033&l%dO", pcl->orientation);
    }
    /* If the printer supports it, set the paper size */
    /* based on the actual requested size. */
    if (pcl->features & PCL_CAN_SET_PAPER_SIZE)
    {
      /* It probably never hurts to define the page explicitly */
      {
        int decipointw = (w * 720 + (xres>>1)) / xres;
        int decipointh = (h * 720 + (yres>>1)) / yres;

        fz_write_printf(ctx, out, "\033&f%dI", decipointw);
        fz_write_printf(ctx, out, "\033&f%dJ", decipointh);
      }
      fz_write_printf(ctx, out, "\033&l%dA", pcl->paper_size);
    }
    /* If printer can duplex, set duplex mode appropriately. */
    if (pcl->features & PCL_HAS_DUPLEX)
    {
      if (pcl->duplex_set)
      {
        if (pcl->duplex)
        {
          if (!pcl->tumble)
            fz_write_string(ctx, out, "\033&l1S");
          else
            fz_write_string(ctx, out, "\033&l2S");
        }
        else
          fz_write_string(ctx, out, "\033&l0S");
      }
      else
      {
        /* default to duplex for this printer */
        fz_write_string(ctx, out, "\033&l1S");
      }
    }
  }

  /* Put out per-page initialization. */
  /* In duplex mode the sheet is already in process, so there are some
   * commands which must not be sent to the printer for the 2nd page,
   * as these commands will cause the printer to eject the sheet with
   * only the 1st page printed. These commands are:
   * \033&l%dA (setting paper size)
   * \033&l%dH (setting paper tray)
   * in simplex mode we set these parameters for each page,
   * in duplex mode we set these parameters for each odd page
   */

  if ((pcl->features & PCL_HAS_DUPLEX) && pcl->duplex_set && pcl->duplex)
  {
    /* We are printing duplex, so change margins as needed */
    if (((pcl->page_count/num_copies)%2) == 0)
    {
      if (pcl->page_count != 0 && (pcl->features & PCL_CAN_SET_PAPER_SIZE))
      {
        fz_write_printf(ctx, out, "\033&l%dA", pcl->paper_size);
      }
      fz_write_string(ctx, out, "\033&l0o0l0E");
      fz_write_string(ctx, out, pcl->odd_page_init);
    }
    else
      fz_write_string(ctx, out, pcl->even_page_init);
  }
  else
  {
    if (pcl->features & PCL_CAN_SET_PAPER_SIZE)
    {
      fz_write_printf(ctx, out, "\033&l%dA", pcl->paper_size);
    }
    fz_write_string(ctx, out, "\033&l0o0l0E");
    fz_write_string(ctx, out, pcl->odd_page_init);
  }

  fz_write_printf(ctx, out, "\033&l%dX", num_copies); /* # of copies */

  /* End raster graphics, position cursor at top. */
  fz_write_string(ctx, out, "\033*rB\033*p0x0Y");

  /* The DeskJet and DeskJet Plus reset everything upon */
  /* receiving \033*rB, so we must reinitialize graphics mode. */
  if (pcl->features & PCL_END_GRAPHICS_DOES_RESET)
  {
    fz_write_string(ctx, out, pcl->odd_page_init); /* Assume this does the right thing */
    fz_write_printf(ctx, out, "\033&l%dX", num_copies); /* # of copies */
  }

  /* Set resolution. */
  fz_write_printf(ctx, out, "\033*t%dR", xres);

  /* Raster units */
  /* 96,100,120,144,150,160,180,200,225,240,288,300,360,400,450,480,600,720,800,900,1200,1440,1800,2400,3600,7200 */
  /* FIXME: xres vs yres */
  fz_write_printf(ctx, out, "\033&u%dD", xres);

  pcl->page_count++;
}

typedef struct pcl_papersize_s
{
  int code;
  const char *text;
  int width;
  int height;
} pcl_papersize;

static const pcl_papersize papersizes[] =
{
  { eLetterPaper,      "letter",       2550, 3300},
  { eLegalPaper,       "legal",        2550, 4200},
  { eA4Paper,          "a4",           2480, 3507},
  { eExecPaper,        "executive",    2175, 3150},
  { eLedgerPaper,      "ledger",       3300, 5100},
  { eA3Paper,          "a3",           3507, 4960},
  { eCOM10Envelope,    "com10",        1237, 2850},
  { eMonarchEnvelope,  "monarch",      1162, 2250},
  { eC5Envelope,       "c5",           1913, 2704},
  { eDLEnvelope,       "dl",           1299, 2598},
  { eJB4Paper,         "jisb4",        3035, 4299},
  { eJB4Paper,         "jis b4",       3035, 4299},
  { eJB5Paper,         "jisb5",        2150, 3035},
  { eJB5Paper,         "jis b5",       2150, 3035},
  { eB5Envelope,       "b5",           2078, 2952},
  { eB5Paper,          "b5paper",      2150, 3035},
  { eJPostcard,        "jpost",        1181, 1748},
  { eJDoublePostcard,  "jpostd",       2362, 1748},
  { eA5Paper,          "a5",           1748, 2480},
  { eA6Paper,          "a6",           1240, 1748},
  { eJB6Paper,         "jisb6",        1512, 2150},
  { eJIS8K,            "jis8K",        3154, 4606},
  { eJIS16K,           "jis16K",       2303, 3154},
  { eJISExec,          "jisexec",      2551, 3898},
  { eB6JIS,            "B6 (JIS)",     1512, 2150},
  { eC6Envelope,       "C6",           1345, 1912},
  { e8Kai,             "8Kai",         3154, 4608},
  { e16Kai,            "16Kai",        2304, 3154},
  { e12x18,            "12x18",        3600, 5400},
  { e13x19_2,          "13x19.2",      3900, 5758},
  { e13x19,            "13x19",        3900, 5700},
  { e12_6x19_2,        "12.6x19.2",    3779, 5758},
  { e12_6x18_5,        "12.6x18.5",    3779, 5550},
  { e13x18,            "13x18",        3900, 5400},
  { eSRA3,             "SRA3",         3779, 5316},
  { eSRA4,             "SRA4",         2658, 3779},
  { e226x310,          "226x310",      2670, 3662},
  { e310x432,          "310x432",      3662, 5104},
  { eEngQuatro,        "EngQuatro",    2400, 3000},
  { e11x14,            "11x14",        3300, 4200},
  { e11x15,            "11x15",        3300, 4500},
  { e10x14,            "10x14",        3000, 4200}
};

#define num_elems(X) (sizeof(X)/sizeof(*X))

static void guess_paper_size(fz_pcl_options *pcl, int w, int h, int xres, int yres)
{
  int size;
  int rotated = 0;

  /* If we've been given a paper size, live with it */
  if (pcl->paper_size != 0)
    return;

  w = w * 300 / xres;
  h = h * 300 / xres;

  /* Look for an exact match */
  for (size = 0; size < (int)num_elems(papersizes); size++)
  {
    if (papersizes[size].code > eCustomPaperSize && (pcl->features & PCL_HAS_RICOH_PAPER_SIZES) == 0)
      continue;
    if (w == papersizes[size].width && h == papersizes[size].height)
      break;
    if ((pcl->features & PCL_HAS_ORIENTATION) && w == papersizes[size].height && h == papersizes[size].width)
    {
      rotated = 1;
      break;
    }
  }

  /* If we didn't find an exact match, find the smallest one that's
   * larger. Consider orientation if our printer supports it. */
  if (size == num_elems(papersizes))
  {
    if ((pcl->features & PCL_CAN_SET_CUSTOM_PAPER_SIZE) != 0)
    {
      /* Send it as a custom size */
      size = eCustomPaperSize;
    }
    else
    {
      /* Send the next larger one (minimise waste) */
      int i;
      int best_waste = INT_MAX;
      for (i = 0; i < (int)num_elems(papersizes); i++)
      {
        int waste;
        if (papersizes[i].code > eCustomPaperSize && (pcl->features & PCL_HAS_RICOH_PAPER_SIZES) == 0)
          continue;
        waste = papersizes[i].width * papersizes[i].height - w * h;
        if (waste > best_waste)
          continue;
        if (w <= papersizes[i].width && h <= papersizes[i].height)
        {
          best_waste = waste;
          rotated = 0;
          size = i;
        }
        if ((pcl->features & PCL_HAS_ORIENTATION) && w <= papersizes[i].height && h <= papersizes[i].width)
        {
          best_waste = waste;
          rotated = 1;
          size = i;
        }
      }
    }
  }

  /* Now, size = The best size we have (or num_elems(papersizes)) if it's too big */

  if (size < (int)num_elems(papersizes))
    pcl->paper_size = papersizes[size].code;
  else
    pcl->paper_size = eCustomPaperSize; /* Custom */

  pcl->orientation = rotated;
}

/* Copy a line, returning true if the line was blank. */
static int
line_is_blank(unsigned char *dst, const unsigned char *sp, int w)
{
  int zero = 0;

  while (w-- > 0)
  {
    zero |= (*dst++ = *sp++);
    zero |= (*dst++ = *sp++);
    zero |= (*dst++ = *sp++);
  }

  return zero == 0;
}

static int
delta_compression(unsigned char *curr, unsigned char *prev, unsigned char *comp, int ds, int space)
{
  int left = space;
  int x = ds;

  while (x > 0)
  {
    /* Count matching bytes */
    int match = 0;
    int diff = 0;
    while (x > 0 && *curr == *prev)
    {
      curr++;
      prev++;
      match++;
      x--;
    }

    /* Count different bytes */
    while (x > 0 && *curr != *prev)
    {
      curr++;
      prev++;
      diff++;
      x--;
    }

    while (diff > 0)
    {
      int exts;
      int mini_diff = diff;
      if (mini_diff > 8)
        mini_diff = 8;

      exts = (match+255-31)/255;
      left -= 1 + mini_diff + exts;
      if (left < 0)
        return 0;
      *comp++ = ((mini_diff-1)<<5) | (match < 31 ? match : 31);
      if (exts > 0)
      {
        match -= 31;
        while (--exts)
        {
          *comp++ = 255;
          match -= 255;
        }
        *comp++ = match;
      }
      memcpy(comp, curr-diff, mini_diff);
      comp += mini_diff;

      match = 0;
      diff -= mini_diff;
    }
  }
  return space - left;
}

void
fz_write_pixmap_as_pcl(fz_context *ctx, fz_output *out, const fz_pixmap *pixmap, const fz_pcl_options *pcl)
{
  fz_band_writer *writer;

  if (!pixmap || !out)
    return;

  writer = fz_new_color_pcl_band_writer(ctx, out, pcl);
  fz_try(ctx)
  {
    fz_write_header(ctx, writer, pixmap->w, pixmap->h, pixmap->n, pixmap->alpha, pixmap->xres, pixmap->yres, 0, pixmap->colorspace, pixmap->seps);
    fz_write_band(ctx, writer, pixmap->stride, pixmap->h, pixmap->samples);
    fz_close_band_writer(ctx, writer);
  }
  fz_always(ctx)
    fz_drop_band_writer(ctx, writer);
  fz_catch(ctx)
    fz_rethrow(ctx);
}

typedef struct color_pcl_band_writer_s
{
  fz_band_writer super;
  fz_pcl_options options;
  unsigned char *linebuf;
  unsigned char compbuf[32768];
  unsigned char compbuf2[32768];
} color_pcl_band_writer;

static void
color_pcl_write_header(fz_context *ctx, fz_band_writer *writer_, fz_colorspace *cs)
{
  color_pcl_band_writer *writer = (color_pcl_band_writer *)writer_;
  fz_output *out = writer->super.out;
  int w = writer->super.w;
  int h = writer->super.h;
  int n = writer->super.n;
  int s = writer->super.s;
  int a = writer->super.alpha;
  int xres = writer->super.xres;
  int yres = writer->super.yres;

  if (a != 0)
    fz_throw(ctx, FZ_ERROR_ARGUMENT, "color PCL cannot write alpha channel");
  if (s != 0)
    fz_throw(ctx, FZ_ERROR_ARGUMENT, "color PCL cannot write spot colors");
  if (n != 3)
    fz_throw(ctx, FZ_ERROR_ARGUMENT, "color PCL must be RGB");

  writer->linebuf = Memento_label(fz_malloc(ctx, w * 3 * 2), "color_pcl_linebuf");

  guess_paper_size(&writer->options, w, h, xres, yres);

  pcl_header(ctx, out, &writer->options, 1, xres, yres, w, h);

  /* Raster presentation */
  /* Print in orientation of the logical page */
  fz_write_string(ctx, out, "\033&r0F");

  /* Set color mode */
  fz_write_data(ctx, out, "\033*v6W"
    "\000"  /* Colorspace 0 = Device RGB */
    "\003"  /* Pixel encoding mode: 3 = Direct by Pixel*/
    "\000"  /* Bits per index: 0 = no palette */
    "\010"  /* Red bits */
    "\010"  /* Green bits */
    "\010", /* Blue bits */
    11
    );

  /* Raster resolution */
  /* Supposed to be strictly 75, 100, 150, 200, 300, 600 */
  /* FIXME: xres vs yres */
  fz_write_printf(ctx, out, "\033*t%dR", xres);
}

static void flush_if_not_room(fz_context *ctx, fz_output *out, const unsigned char *comp, int *fill, int len)
{
  if (len + *fill >= 32767)
  {
    /* Can't fit any data, so flush */
    fz_write_printf(ctx, out, "\033*b%dW", *fill);
    fz_write_data(ctx, out, comp, *fill);
    *fill = 0;
  }
}

static void
color_pcl_compress_column(fz_context *ctx, color_pcl_band_writer *writer, const unsigned char *sp, int w, int h, int stride)
{
  fz_output *out = writer->super.out;
  int ss = w * 3;
  int seed_valid = 0;
  int fill = 0;
  int y = 0;
  unsigned char *prev = writer->linebuf + w * 3;
  unsigned char *curr = writer->linebuf;
  unsigned char *comp = writer->compbuf;
  unsigned char *comp2 = writer->compbuf2;

  while (y < h)
  {
    /* Skip over multiple blank lines */
    int blanks;
    do
    {
      blanks = 0;
      while (blanks < 32767 && y < h)
      {
        if (!line_is_blank(curr, sp, w))
          break;
        blanks++;
        y++;
      }

      if (blanks)
      {
        flush_if_not_room(ctx, out, comp, &fill, 3);
        comp[fill++] = 4; /* Empty row */
        comp[fill++] = blanks>>8;
        comp[fill++] = blanks & 0xFF;
        seed_valid = 0;
      }
    }
    while (blanks == 32767);

    if (y == h)
      break;

    /* So, at least 1 more line to copy, and it's in curr */
    if (seed_valid && memcmp(curr, prev, ss) == 0)
    {
      int count = 1;
      sp += stride;
      y++;
      while (count < 32767 && y < h)
      {
        if (memcmp(sp-stride, sp, ss) != 0)
          break;
        count++;
        sp += stride;
        y++;
      }
      flush_if_not_room(ctx, out, comp, &fill, 3);
      comp[fill++] = 5; /* Duplicate row */
      comp[fill++] = count>>8;
      comp[fill++] = count & 0xFF;
    }
    else
    {
      unsigned char *tmp;
      int len = 0;

      /* Compress the line into our fixed buffer. */
      if (seed_valid)
        len = delta_compression(curr, prev, comp2, ss, fz_mini(ss-1, 32767-3));

      if (len > 0)
      {
        /* Delta compression */
        flush_if_not_room(ctx, out, comp, &fill, len+3);
        comp[fill++] = 3; /* Delta compression */
        comp[fill++] = len>>8;
        comp[fill++] = len & 0xFF;
        memcpy(&comp[fill], comp2, len);
        fill += len;
      }
      else
      {
        flush_if_not_room(ctx, out, comp, &fill, 3 + ss);

        /* PCL requires that all rows MUST fit in at most 1 block, so
         * we are carefully sending columns that are only so wide. */

        /* Unencoded */
        /* Transfer Raster Data: ss+3 bytes, 0 = Unencoded, count high, count low */
        comp[fill++] = 0;
        comp[fill++] = ss>>8;
        comp[fill++] = ss & 0xFF;
        memcpy(&comp[fill], curr, ss);
        fill += ss;
        seed_valid = 1;
      }

      /* curr becomes prev */
      tmp = prev; prev = curr; curr = tmp;
      sp += stride;
      y++;
    }
  }
  /* And flush */
  if (fill) {
    fz_write_printf(ctx, out, "\033*b%dW", fill);
    fz_write_data(ctx, out, comp, fill);
  }

  /* End Raster Graphics */
  fz_write_string(ctx, out, "\033*rC");
}

static void
color_pcl_write_band(fz_context *ctx, fz_band_writer *writer_, int stride, int band_start, int band_height, const unsigned char *sp)
{
  color_pcl_band_writer *writer = (color_pcl_band_writer *)writer_;
  fz_output *out = writer->super.out;
  int w = writer->super.w;
  int h = writer->super.h;
  int xres = writer->super.xres;
  int cw;
  int x;

  if (!out)
    return;

  if (band_start+band_height >= h)
    band_height = h - band_start;

  /* We have to specify image output size in decipoints (720dpi).
   * Most usual PCL resolutions are a multiple of 75.
   * Pick our maximum column size to be 10800 = 15*720 = 144*75
   * to give us good results. 10800 * 3 = 32400 < 32760 */
  cw = 10800; /* Limited by how much rowdata we can send at once */
  if (cw > w)
    cw = w;

  for (x = 0; x*cw < w; x++)
  {
    int col_w = w - cw*x;
    if (col_w > cw)
      col_w = cw;

    /* Top left corner */
    fz_write_printf(ctx, out, "\033*p%dx%dY", x*cw, band_start);

    /* Raster height */
    fz_write_printf(ctx, out, "\033*r%dT", band_height);

    /* Raster width */
    fz_write_printf(ctx, out, "\033*r%dS", col_w);

    /* Destination height */
    fz_write_printf(ctx, out, "\033*t%dV", band_height*720/xres);

    /* Destination width */
    fz_write_printf(ctx, out, "\033*t%dH", col_w*720/xres);

    /* start raster graphics */
    /* 1 = start at cursor position */
    fz_write_string(ctx, out, "\033*r3A");

    /* Now output the actual bitmap */
    /* Adaptive Compression */
    fz_write_string(ctx, out, "\033*b5M");

    color_pcl_compress_column(ctx, writer, sp + x * cw * 3, col_w, band_height, stride);
  }
}

static void
color_pcl_write_trailer(fz_context *ctx, fz_band_writer *writer_)
{
}

static void
color_pcl_drop_band_writer(fz_context *ctx, fz_band_writer *writer_)
{
  color_pcl_band_writer *writer = (color_pcl_band_writer *)writer_;
  fz_free(ctx, writer->linebuf);
}

fz_band_writer *fz_new_color_pcl_band_writer(fz_context *ctx, fz_output *out, const fz_pcl_options *options)
{
  color_pcl_band_writer *writer = fz_new_band_writer(ctx, color_pcl_band_writer, out);

  writer->super.header = color_pcl_write_header;
  writer->super.band = color_pcl_write_band;
  writer->super.trailer = color_pcl_write_trailer;
  writer->super.drop = color_pcl_drop_band_writer;

  if (options)
    writer->options = *options;
  else
    fz_pcl_preset(ctx, &writer->options, "generic");

  return &writer->super;
}

/*
 * Mode 2 Row compression routine for the HP DeskJet & LaserJet IIp.
 * Compresses data from row up to end_row, storing the result
 * starting at out. Returns the number of bytes stored.
 * Runs of K<=127 literal bytes are encoded as K-1 followed by
 * the bytes; runs of 2<=K<=127 identical bytes are encoded as
 * 257-K followed by the byte.
 * In the worst case, the result is N+(N/127)+1 bytes long,
 * where N is the original byte count (end_row - row).
 */
static int
mode2compress(unsigned char *out, const unsigned char *in, int in_len)
{
  int x;
  int out_len = 0;
  int run;

  for (x = 0; x < in_len; x += run)
  {
    /* How far do we have to look to find a value that isn't repeated? */
    for (run = 1; run < 127 && x+run < in_len; run++)
      if (in[0] != in[run])
        break;
    if (run > 1)
    {
      /* We have a run of matching bytes */
      out[out_len++] = 257-run;
      out[out_len++] = in[0];
    }
    else
    {
      /* Now copy as many literals as possible. We only
       * break the run at a length of 127, at the end,
       * or where we have 3 repeated values. */
      int i;

      /* How many literals do we need to copy? */
      for (; run < 127 && x+run+2 < in_len; run++)
        if (in[run] == in[run+1] && in[run] == in[run+2])
          break;
      /* Don't leave stragglers at the end */
      if (x + run + 2 >= in_len)
      {
        run = in_len - x;
        if (run > 127)
          run = 127;
      }
      out[out_len++] = run-1;
      for (i = 0; i < run; i++)
      {
        out[out_len++] = in[i];
      }
    }
    in += run;
  }

  return out_len;
}

/*
 * Mode 3 compression routine for the HP LaserJet III family.
 * Compresses bytecount bytes starting at current, storing the result
 * in compressed, comparing against and updating previous.
 * Returns the number of bytes stored.  In the worst case,
 * the number of bytes is bytecount+(bytecount/8)+1.
 */
static int
mode3compress(unsigned char *out, const unsigned char *in, unsigned char *prev, int in_len)
{
  unsigned char *compressed = out;
  const unsigned char *cur = in;
  const unsigned char *end = in + in_len;

  while (cur < end) {   /* Detect a maximum run of unchanged bytes. */
    const unsigned char *run = cur;
    const unsigned char *diff;
    const unsigned char *stop;
    int offset, cbyte;

    while (cur < end && *cur == *prev) {
      cur++, prev++;
    }
    if (cur == end)
      break;   /* rest of row is unchanged */
    /* Detect a run of up to 8 changed bytes. */
    /* We know that *cur != *prev. */
    diff = cur;
    stop = (end - cur > 8 ? cur + 8 : end);
    do
    {
      *prev++ = *cur++;
    }
    while (cur < stop && *cur != *prev);
    /* Now [run..diff) are unchanged, and */
    /* [diff..cur) are changed. */
    /* Generate the command byte(s). */
    offset = diff - run;
    cbyte = (cur - diff - 1) << 5;
    if (offset < 31)
      *out++ = cbyte + offset;
    else {
      *out++ = cbyte + 31;
      offset -= 31;
      while (offset >= 255)
        *out++ = 255, offset -= 255;
      *out++ = offset;
    }
    /* Copy the changed data. */
    while (diff < cur)
      *out++ = *diff++;
  }
  return out - compressed;
}

void
fz_write_bitmap_as_pcl(fz_context *ctx, fz_output *out, const fz_bitmap *bitmap, const fz_pcl_options *pcl)
{
  fz_band_writer *writer;

  if (!bitmap || !out)
    return;

  writer = fz_new_mono_pcl_band_writer(ctx, out, pcl);
  fz_try(ctx)
  {
    fz_write_header(ctx, writer, bitmap->w, bitmap->h, 1, 0, bitmap->xres, bitmap->yres, 0, NULL, NULL);
    fz_write_band(ctx, writer, bitmap->stride, bitmap->h, bitmap->samples);
    fz_close_band_writer(ctx, writer);
  }
  fz_always(ctx)
    fz_drop_band_writer(ctx, writer);
  fz_catch(ctx)
    fz_rethrow(ctx);
}

typedef struct mono_pcl_band_writer_s
{
  fz_band_writer super;
  fz_pcl_options options;
  unsigned char *prev;
  unsigned char *mode2buf;
  unsigned char *mode3buf;
  int top_of_page;
  int num_blank_lines;
} mono_pcl_band_writer;

static void
mono_pcl_write_header(fz_context *ctx, fz_band_writer *writer_, fz_colorspace *cs)
{
  mono_pcl_band_writer *writer = (mono_pcl_band_writer *)writer_;
  fz_output *out = writer->super.out;
  int w = writer->super.w;
  int h = writer->super.h;
  int xres = writer->super.xres;
  int yres = writer->super.yres;
  int line_size;
  int max_mode_2_size;
  int max_mode_3_size;

  if (writer->super.alpha != 0)
    fz_throw(ctx, FZ_ERROR_ARGUMENT, "mono PCL cannot write alpha channel");
  if (writer->super.s != 0)
    fz_throw(ctx, FZ_ERROR_ARGUMENT, "mono PCL cannot write spot colors");
  if (writer->super.n != 1)
    fz_throw(ctx, FZ_ERROR_ARGUMENT, "mono PCL must be grayscale");

  line_size = (w + 7)/8;
  max_mode_2_size = line_size + (line_size/127) + 1;
  max_mode_3_size = line_size + (line_size/8) + 1;

  writer->prev = fz_calloc(ctx, line_size, sizeof(unsigned char));
  writer->mode2buf = fz_calloc(ctx, max_mode_2_size, sizeof(unsigned char));
  writer->mode3buf = fz_calloc(ctx, max_mode_3_size, sizeof(unsigned char));
  writer->num_blank_lines = 0;
  writer->top_of_page = 1;

  guess_paper_size(&writer->options, w, h, xres, yres);

  if (writer->options.features & HACK__IS_A_OCE9050)
  {
    /* Enter HPGL/2 mode, begin plot, Initialise (start plot), Enter PCL mode */
    fz_write_string(ctx, out, "\033%1BBPIN;\033%1A");
  }

  pcl_header(ctx, out, &writer->options, 1, xres, yres, w, h);
}

static void
mono_pcl_write_band(fz_context *ctx, fz_band_writer *writer_, int ss, int band_start, int band_height, const unsigned char *data)
{
  mono_pcl_band_writer *writer = (mono_pcl_band_writer *)writer_;
  fz_output *out = writer->super.out;
  int w = writer->super.w;
  int yres = writer->super.yres;
  const unsigned char *out_data;
  int y, rmask, line_size;
  int num_blank_lines;
  int compression = -1;
  unsigned char *prev = NULL;
  unsigned char *mode2buf = NULL;
  unsigned char *mode3buf = NULL;
  int out_count;
  const fz_pcl_options *pcl;

  if (!out)
    return;

  num_blank_lines = writer->num_blank_lines;
  rmask = ~0 << (-w & 7);
  line_size = (w + 7)/8;
  prev = writer->prev;
  mode2buf = writer->mode2buf;
  mode3buf = writer->mode3buf;
  pcl = &writer->options;

  /* Transfer raster graphics. */
  for (y = 0; y < band_height; y++, data += ss)
  {
    const unsigned char *end_data = data + line_size;

    if ((end_data[-1] & rmask) == 0)
    {
      end_data--;
      while (end_data > data && end_data[-1] == 0)
        end_data--;
    }
    if (end_data == data)
    {
      /* Blank line */
      num_blank_lines++;
      continue;
    }

    /* We've reached a non-blank line. */
    /* Put out a spacing command if necessary. */
    if (writer->top_of_page)
    {
      writer->top_of_page = 0;
      /* We're at the top of a page. */
      if (pcl->features & PCL_ANY_SPACING)
      {
        if (num_blank_lines > 0)
          fz_write_printf(ctx, out, "\033*p+%dY", num_blank_lines);
        /* Start raster graphics. */
        fz_write_string(ctx, out, "\033*r1A");
      }
      else if (pcl->features & PCL_MODE_3_COMPRESSION)
      {
        /* Start raster graphics. */
        fz_write_string(ctx, out, "\033*r1A");
        for (; num_blank_lines; num_blank_lines--)
          fz_write_string(ctx, out, "\033*b0W");
      }
      else
      {
        /* Start raster graphics. */
        fz_write_string(ctx, out, "\033*r1A");
        for (; num_blank_lines; num_blank_lines--)
          fz_write_string(ctx, out, "\033*bW");
      }
    }

    /* Skip blank lines if any */
    else if (num_blank_lines != 0)
    {
      /* Moving down from current position causes head
       * motion on the DeskJet, so if the number of lines
       * is small, we're better off printing blanks.
       *
       * For Canon LBP4i and some others, <ESC>*b<n>Y
       * doesn't properly clear the seed row if we are in
       * compression mode 3.
       */
      if ((num_blank_lines < MIN_SKIP_LINES && compression != 3) ||
          !(pcl->features & PCL_ANY_SPACING))
      {
        int mode_3ns = ((pcl->features & PCL_MODE_3_COMPRESSION) && !(pcl->features & PCL_ANY_SPACING));
        if (mode_3ns && compression != 2)
        {
          /* Switch to mode 2 */
          fz_write_string(ctx, out, from3to2);
          compression = 2;
        }
        if (pcl->features & PCL_MODE_3_COMPRESSION)
        {
          /* Must clear the seed row. */
          fz_write_string(ctx, out, "\033*b1Y");
          num_blank_lines--;
        }
        if (mode_3ns)
        {
          for (; num_blank_lines; num_blank_lines--)
            fz_write_string(ctx, out, "\033*b0W");
        }
        else
        {
          for (; num_blank_lines; num_blank_lines--)
            fz_write_string(ctx, out, "\033*bW");
        }
      }
      else if (pcl->features & PCL3_SPACING)
        fz_write_printf(ctx, out, "\033*p+%dY", num_blank_lines * yres);
      else
        fz_write_printf(ctx, out, "\033*b%dY", num_blank_lines);
      /* Clear the seed row (only matters for mode 3 compression). */
      memset(prev, 0, line_size);
    }
    num_blank_lines = 0;

    /* Choose the best compression mode for this particular line. */
    if (pcl->features & PCL_MODE_3_COMPRESSION)
    {
      /* Compression modes 2 and 3 are both available. Try
       * both and see which produces the least output data.
       */
      int count3 = mode3compress(mode3buf, data, prev, line_size);
      int count2 = mode2compress(mode2buf, data, line_size);
      int penalty3 = (compression == 3 ? 0 : penalty_from2to3);
      int penalty2 = (compression == 2 ? 0 : penalty_from3to2);

      if (count3 + penalty3 < count2 + penalty2)
      {
        if (compression != 3)
          fz_write_string(ctx, out, from2to3);
        compression = 3;
        out_data = (unsigned char *)mode3buf;
        out_count = count3;
      }
      else
      {
        if (compression != 2)
          fz_write_string(ctx, out, from3to2);
        compression = 2;
        out_data = (unsigned char *)mode2buf;
        out_count = count2;
      }
    }
    else if (pcl->features & PCL_MODE_2_COMPRESSION)
    {
      out_data = mode2buf;
      out_count = mode2compress(mode2buf, data, line_size);
    }
    else
    {
      out_data = data;
      out_count = line_size;
    }

    /* Transfer the data */
    fz_write_printf(ctx, out, "\033*b%dW", out_count);
    fz_write_data(ctx, out, out_data, out_count);
  }

  writer->num_blank_lines = num_blank_lines;
}

static void
mono_pcl_write_trailer(fz_context *ctx, fz_band_writer *writer_)
{
  mono_pcl_band_writer *writer = (mono_pcl_band_writer *)writer_;
  fz_output *out = writer->super.out;

  /* end raster graphics and eject page */
  fz_write_string(ctx, out, "\033*rB\f");

  if (writer->options.features & HACK__IS_A_OCE9050)
  {
    /* Pen up, pen select, advance full page, reset */
    fz_write_string(ctx, out, "\033%1BPUSP0PG;\033E");
  }
}

static void
mono_pcl_drop_band_writer(fz_context *ctx, fz_band_writer *writer_)
{
  mono_pcl_band_writer *writer = (mono_pcl_band_writer *)writer_;

  fz_free(ctx, writer->prev);
  fz_free(ctx, writer->mode2buf);
  fz_free(ctx, writer->mode3buf);
}

fz_band_writer *fz_new_mono_pcl_band_writer(fz_context *ctx, fz_output *out, const fz_pcl_options *options)
{
  mono_pcl_band_writer *writer = fz_new_band_writer(ctx, mono_pcl_band_writer, out);

  writer->super.header = mono_pcl_write_header;
  writer->super.band = mono_pcl_write_band;
  writer->super.trailer = mono_pcl_write_trailer;
  writer->super.drop = mono_pcl_drop_band_writer;

  if (options)
    writer->options = *options;
  else
    fz_pcl_preset(ctx, &writer->options, "generic");

  return &writer->super;
}

void
fz_save_pixmap_as_pcl(fz_context *ctx, fz_pixmap *pixmap, char *filename, int append, const fz_pcl_options *pcl)
{
  fz_output *out = fz_new_output_with_path(ctx, filename, append);
  fz_try(ctx)
  {
    fz_write_pixmap_as_pcl(ctx, out, pixmap, pcl);
    fz_close_output(ctx, out);
  }
  fz_always(ctx)
    fz_drop_output(ctx, out);
  fz_catch(ctx)
    fz_rethrow(ctx);
}

void
fz_save_bitmap_as_pcl(fz_context *ctx, fz_bitmap *bitmap, char *filename, int append, const fz_pcl_options *pcl)
{
  fz_output *out = fz_new_output_with_path(ctx, filename, append);
  fz_try(ctx)
  {
    fz_write_bitmap_as_pcl(ctx, out, bitmap, pcl);
    fz_close_output(ctx, out);
  }
  fz_always(ctx)
    fz_drop_output(ctx, out);
  fz_catch(ctx)
    fz_rethrow(ctx);
}

/* High-level document writer interface */

typedef struct
{
  fz_document_writer super;
  fz_draw_options draw;
  fz_pcl_options pcl;
  fz_pixmap *pixmap;
  int mono;
  fz_output *out;
} fz_pcl_writer;

static fz_device *
pcl_begin_page(fz_context *ctx, fz_document_writer *wri_, fz_rect mediabox)
{
  fz_pcl_writer *wri = (fz_pcl_writer*)wri_;
  return fz_new_draw_device_with_options(ctx, &wri->draw, mediabox, &wri->pixmap);
}

static void
pcl_end_page(fz_context *ctx, fz_document_writer *wri_, fz_device *dev)
{
  fz_pcl_writer *wri = (fz_pcl_writer*)wri_;
  fz_bitmap *bitmap = NULL;

  fz_var(bitmap);

  fz_try(ctx)
  {
    fz_close_device(ctx, dev);
    if (wri->mono)
    {
      bitmap = fz_new_bitmap_from_pixmap(ctx, wri->pixmap, NULL);
      fz_write_bitmap_as_pcl(ctx, wri->out, bitmap, &wri->pcl);
    }
    else
    {
      fz_write_pixmap_as_pcl(ctx, wri->out, wri->pixmap, &wri->pcl);
    }
  }
  fz_always(ctx)
  {
    fz_drop_device(ctx, dev);
    fz_drop_bitmap(ctx, bitmap);
    fz_drop_pixmap(ctx, wri->pixmap);
    wri->pixmap = NULL;
  }
  fz_catch(ctx)
    fz_rethrow(ctx);
}

static void
pcl_close_writer(fz_context *ctx, fz_document_writer *wri_)
{
  fz_pcl_writer *wri = (fz_pcl_writer*)wri_;
  fz_close_output(ctx, wri->out);
}

static void
pcl_drop_writer(fz_context *ctx, fz_document_writer *wri_)
{
  fz_pcl_writer *wri = (fz_pcl_writer*)wri_;
  fz_drop_pixmap(ctx, wri->pixmap);
  fz_drop_output(ctx, wri->out);
}

fz_document_writer *
fz_new_pcl_writer_with_output(fz_context *ctx, fz_output *out, const char *options)
{
  fz_pcl_writer *wri = NULL;
  const char *val;

  fz_var(wri);

  fz_try(ctx)
  {
    wri = fz_new_derived_document_writer(ctx, fz_pcl_writer, pcl_begin_page, pcl_end_page, pcl_close_writer, pcl_drop_writer);
    fz_parse_draw_options(ctx, &wri->draw, options);
    fz_parse_pcl_options(ctx, &wri->pcl, options);
    if (fz_has_option(ctx, options, "colorspace", &val))
      if (fz_option_eq(val, "mono"))
        wri->mono = 1;
    wri->out = out;
  }
  fz_catch(ctx)
  {
    fz_drop_output(ctx, out);
    fz_free(ctx, wri);
    fz_rethrow(ctx);
  }

  return (fz_document_writer*)wri;
}

fz_document_writer *
fz_new_pcl_writer(fz_context *ctx, const char *path, const char *options)
{
  fz_output *out = fz_new_output_with_path(ctx, path ? path : "out.pcl", 0);
  return fz_new_pcl_writer_with_output(ctx, out, options);
}

Coverage Report

Created: 2025-01-28 06:17