/src/cairo/src/cairo-tor-scan-converter.c

Source
/* -*- Mode: c; tab-width: 8; c-basic-offset: 4; indent-tabs-mode: t; -*- */
/* glitter-paths - polygon scan converter
 *
 * Copyright (c) 2008  M Joonas Pihlaja
 * Copyright (c) 2007  David Turner
 *
 * Permission is hereby granted, free of charge, to any person
 * obtaining a copy of this software and associated documentation
 * files (the "Software"), to deal in the Software without
 * restriction, including without limitation the rights to use,
 * copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following
 * conditions:
 *
 * The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 */
/* This is the Glitter paths scan converter incorporated into cairo.
 * The source is from commit 734c53237a867a773640bd5b64816249fa1730f8
 * of
 *
 *   https://gitweb.freedesktop.org/?p=users/joonas/glitter-paths
 */
/* Glitter-paths is a stand alone polygon rasteriser derived from
 * David Turner's reimplementation of Tor Anderssons's 15x17
 * supersampling rasteriser from the Apparition graphics library.  The
 * main new feature here is cheaply choosing per-scan line between
 * doing fully analytical coverage computation for an entire row at a
 * time vs. using a supersampling approach.
 *
 * David Turner's code can be found at
 *
 *   http://david.freetype.org/rasterizer-shootout/raster-comparison-20070813.tar.bz2
 *
 * In particular this file incorporates large parts of ftgrays_tor10.h
 * from raster-comparison-20070813.tar.bz2
 */
/* Overview
 *
 * A scan converter's basic purpose to take polygon edges and convert
 * them into an RLE compressed A8 mask.  This one works in two phases:
 * gathering edges and generating spans.
 *
 * 1) As the user feeds the scan converter edges they are vertically
 * clipped and bucketted into a _polygon_ data structure.  The edges
 * are also snapped from the user's coordinates to the subpixel grid
 * coordinates used during scan conversion.
 *
 *     user
 *      |
 *      | edges
 *      V
 *    polygon buckets
 *
 * 2) Generating spans works by performing a vertical sweep of pixel
 * rows from top to bottom and maintaining an _active_list_ of edges
 * that intersect the row.  From the active list the fill rule
 * determines which edges are the left and right edges of the start of
 * each span, and their contribution is then accumulated into a pixel
 * coverage list (_cell_list_) as coverage deltas.  Once the coverage
 * deltas of all edges are known we can form spans of constant pixel
 * coverage by summing the deltas during a traversal of the cell list.
 * At the end of a pixel row the cell list is sent to a coverage
 * blitter for rendering to some target surface.
 *
 * The pixel coverages are computed by either supersampling the row
 * and box filtering a mono rasterisation, or by computing the exact
 * coverages of edges in the active list.  The supersampling method is
 * used whenever some edge starts or stops within the row or there are
 * edge intersections in the row.
 *
 *   polygon bucket for       \
 *   current pixel row        |
 *      |                     |
 *      | activate new edges  |  Repeat GRID_Y times if we
 *      V                     \  are supersampling this row,
 *   active list              /  or just once if we're computing
 *      |                     |  analytical coverage.
 *      | coverage deltas     |
 *      V                     |
 *   pixel coverage list     /
 *      |
 *      V
 *   coverage blitter
 */
#include "cairoint.h"
#include "cairo-spans-private.h"
#include "cairo-error-private.h"

#include <stdlib.h>
#include <string.h>
#include <limits.h>
#include <setjmp.h>

/*-------------------------------------------------------------------------
 * cairo specific config
 */
#define I static

/* Prefer cairo's status type. */
#define GLITTER_HAVE_STATUS_T 1
#define GLITTER_STATUS_SUCCESS CAIRO_STATUS_SUCCESS
#define GLITTER_STATUS_NO_MEMORY CAIRO_STATUS_NO_MEMORY
typedef cairo_status_t glitter_status_t;

/* The input coordinate scale and the rasterisation grid scales. */
#define GLITTER_INPUT_BITS CAIRO_FIXED_FRAC_BITS
#define GRID_X_BITS CAIRO_FIXED_FRAC_BITS
#define GRID_Y 15

/* Set glitter up to use a cairo span renderer to do the coverage
 * blitting. */
struct pool;
struct cell_list;

/*-------------------------------------------------------------------------
 * glitter-paths.h
 */

/* "Input scaled" numbers are fixed precision reals with multiplier
 * 2**GLITTER_INPUT_BITS.  Input coordinates are given to glitter as
 * pixel scaled numbers.  These get converted to the internal grid
 * scaled numbers as soon as possible. Internal overflow is possible
 * if GRID_X/Y inside glitter-paths.c is larger than
 * 1<<GLITTER_INPUT_BITS. */
#ifndef GLITTER_INPUT_BITS
#  define GLITTER_INPUT_BITS 8
#endif
#define GLITTER_INPUT_SCALE (1<<GLITTER_INPUT_BITS)
typedef int glitter_input_scaled_t;

#if !GLITTER_HAVE_STATUS_T
typedef enum {
    GLITTER_STATUS_SUCCESS = 0,
    GLITTER_STATUS_NO_MEMORY
} glitter_status_t;
#endif

#ifndef I
# define I /*static*/
#endif

/* Opaque type for scan converting. */
typedef struct glitter_scan_converter glitter_scan_converter_t;

/* Reset a scan converter to accept polygon edges and set the clip box
 * in pixels.  Allocates O(ymax-ymin) bytes of memory.  The clip box
 * is set to integer pixel coordinates xmin <= x < xmax, ymin <= y <
 * ymax. */
I glitter_status_t
glitter_scan_converter_reset(
    glitter_scan_converter_t *converter,
    int xmin, int ymin,
    int xmax, int ymax);

/* Render the polygon in the scan converter to the given A8 format
 * image raster.  Only the pixels accessible as pixels[y*stride+x] for
 * x,y inside the clip box are written to, where xmin <= x < xmax,
 * ymin <= y < ymax.  The image is assumed to be clear on input.
 *
 * If nonzero_fill is true then the interior of the polygon is
 * computed with the non-zero fill rule.  Otherwise the even-odd fill
 * rule is used.
 *
 * The scan converter must be reset or destroyed after this call. */

/*-------------------------------------------------------------------------
 * glitter-paths.c: Implementation internal types
 */
#include <stdlib.h>
#include <string.h>
#include <limits.h>

/* All polygon coordinates are snapped onto a subsample grid. "Grid
 * scaled" numbers are fixed precision reals with multiplier GRID_X or
 * GRID_Y. */
typedef int grid_scaled_t;
typedef int grid_scaled_x_t;
typedef int grid_scaled_y_t;

/* Default x/y scale factors.
 *  You can either define GRID_X/Y_BITS to get a power-of-two scale
 *  or define GRID_X/Y separately. */
#if !defined(GRID_X) && !defined(GRID_X_BITS)
#  define GRID_X_BITS 8
#endif
#if !defined(GRID_Y) && !defined(GRID_Y_BITS)
#  define GRID_Y 15
#endif

/* Use GRID_X/Y_BITS to define GRID_X/Y if they're available. */
#ifdef GRID_X_BITS
#  define GRID_X (1 << GRID_X_BITS)
#endif
#ifdef GRID_Y_BITS
#  define GRID_Y (1 << GRID_Y_BITS)
#endif

/* The GRID_X_TO_INT_FRAC macro splits a grid scaled coordinate into
 * integer and fractional parts. The integer part is floored. */
#if defined(GRID_X_TO_INT_FRAC)
  /* do nothing */
#elif defined(GRID_X_BITS)
#  define GRID_X_TO_INT_FRAC(x, i, f) \
  _GRID_TO_INT_FRAC_shift(x, i, f, GRID_X_BITS)
#else
#  define GRID_X_TO_INT_FRAC(x, i, f) \
  _GRID_TO_INT_FRAC_general(x, i, f, GRID_X)
#endif

#define _GRID_TO_INT_FRAC_general(t, i, f, m) do {  \
    (i) = (t) / (m);          \
    (f) = (t) % (m);          \
    if ((f) < 0) {          \
  --(i);            \
  (f) += (m);         \
    }             \
} while (0)

#define _GRID_TO_INT_FRAC_shift(t, i, f, b) do { \
    (f) = (t) & ((1 << (b)) - 1);     \
    (i) = (t) >> (b);         \
} while (0)

/* A grid area is a real in [0,1] scaled by 2*GRID_X*GRID_Y.  We want
 * to be able to represent exactly areas of subpixel trapezoids whose
 * vertices are given in grid scaled coordinates.  The scale factor
 * comes from needing to accurately represent the area 0.5*dx*dy of a
 * triangle with base dx and height dy in grid scaled numbers. */
#define GRID_XY (2*GRID_X*GRID_Y) /* Unit area on the grid. */

/* GRID_AREA_TO_ALPHA(area): map [0,GRID_XY] to [0,255]. */
#if GRID_XY == 510
#  define GRID_AREA_TO_ALPHA(c)   (((c)+1) >> 1)
#elif GRID_XY == 255
#  define  GRID_AREA_TO_ALPHA(c)  (c)
#elif GRID_XY == 64
#  define  GRID_AREA_TO_ALPHA(c)  (((c) << 2) | -(((c) & 0x40) >> 6))
#elif GRID_XY == 128
#  define  GRID_AREA_TO_ALPHA(c)  ((((c) << 1) | -((c) >> 7)) & 255)
#elif GRID_XY == 256
#  define  GRID_AREA_TO_ALPHA(c)  (((c) | -((c) >> 8)) & 255)
#elif GRID_XY == 15
#  define  GRID_AREA_TO_ALPHA(c)  (((c) << 4) + (c))
#elif GRID_XY == 2*256*15
#  define  GRID_AREA_TO_ALPHA(c)  (((c) + ((c)<<4) + 256) >> 9)
#else
#  define  GRID_AREA_TO_ALPHA(c)  (((c)*255 + GRID_XY/2) / GRID_XY)
#endif

#define UNROLL3(x) x x x

struct quorem {
    int32_t quo;
    int64_t rem;
};

/* Header for a chunk of memory in a memory pool. */
struct _pool_chunk {
    /* # bytes used in this chunk. */
    size_t size;

    /* # bytes total in this chunk */
    size_t capacity;

    /* Pointer to the previous chunk or %NULL if this is the sentinel
     * chunk in the pool header. */
    struct _pool_chunk *prev_chunk;

    /* Actual data starts here. Well aligned even for 64 bit types. */
    int64_t data;
};

/* The int64_t data member of _pool_chunk just exists to enforce alignment,
 * it shouldn't be included in the allocated size for the struct. */
#define SIZEOF_POOL_CHUNK (sizeof(struct _pool_chunk) - sizeof(int64_t))

/* A memory pool.  This is supposed to be embedded on the stack or
 * within some other structure.  It may optionally be followed by an
 * embedded array from which requests are fulfilled until
 * malloc needs to be called to allocate a first real chunk. */
struct pool {
    /* Chunk we're allocating from. */
    struct _pool_chunk *current;

    jmp_buf *jmp;

    /* Free list of previously allocated chunks.  All have >= default
     * capacity. */
    struct _pool_chunk *first_free;

    /* The default capacity of a chunk. */
    size_t default_capacity;

    /* Header for the sentinel chunk.  Directly following the pool
     * struct should be some space for embedded elements from which
     * the sentinel chunk allocates from. This is expressed as a char
     * array so that the 'int64_t data' member of _pool_chunk isn't
     * included. This way embedding struct pool in other structs works
     * without wasting space. */
    char sentinel[SIZEOF_POOL_CHUNK];
};

/* A polygon edge. */
struct edge {
    /* Next in y-bucket or active list. */
    struct edge *next, *prev;

    /* The clipped y of the top of the edge. */
    grid_scaled_y_t ytop;

    /* Number of subsample rows remaining to scan convert of this
     * edge. */
    grid_scaled_y_t height_left;

    /* Original sign of the edge: +1 for downwards, -1 for upwards
     * edges.  */
    int dir;
    int cell;

    /* Current x coordinate while the edge is on the active
     * list. Initialised to the x coordinate of the top of the
     * edge. The quotient is in grid_scaled_x_t units and the
     * remainder is mod dy in grid_scaled_y_t units.*/
    struct quorem x;

    /* Advance of the current x when moving down a subsample line. */
    struct quorem dxdy;

    /* Advance of the current x when moving down a full pixel
     * row. Only initialised when the height of the edge is large
     * enough that there's a chance the edge could be stepped by a
     * full row's worth of subsample rows at a time. */
    struct quorem dxdy_full;

    /* y2-y1 after orienting the edge downwards.  */
    int64_t dy;
};

#define EDGE_Y_BUCKET_INDEX(y, ymin) (((y) - (ymin))/GRID_Y)

/* A collection of sorted and vertically clipped edges of the polygon.
 * Edges are moved from the polygon to an active list while scan
 * converting. */
struct polygon {
    /* The vertical clip extents. */
    grid_scaled_y_t ymin, ymax;

    /* Array of edges all starting in the same bucket.  An edge is put
     * into bucket EDGE_BUCKET_INDEX(edge->ytop, polygon->ymin) when
     * it is added to the polygon. */
    struct edge **y_buckets;
    struct edge *y_buckets_embedded[64];

    struct {
  struct pool base[1];
  struct edge embedded[32];
    } edge_pool;
};

/* A cell records the effect on pixel coverage of polygon edges
 * passing through a pixel.  It contains two accumulators of pixel
 * coverage.
 *
 * Consider the effects of a polygon edge on the coverage of a pixel
 * it intersects and that of the following one.  The coverage of the
 * following pixel is the height of the edge multiplied by the width
 * of the pixel, and the coverage of the pixel itself is the area of
 * the trapezoid formed by the edge and the right side of the pixel.
 *
 * +-----------------------+-----------------------+
 * |                       |                       |
 * |                       |                       |
 * |_______________________|_______________________|
 * |   \...................|.......................|\
 * |    \..................|.......................| |
 * |     \.................|.......................| |
 * |      \....covered.....|.......................| |
 * |       \....area.......|.......................| } covered height
 * |        \..............|.......................| |
 * |uncovered\.............|.......................| |
 * |  area    \............|.......................| |
 * |___________\...........|.......................|/
 * |                       |                       |
 * |                       |                       |
 * |                       |                       |
 * +-----------------------+-----------------------+
 *
 * Since the coverage of the following pixel will always be a multiple
 * of the width of the pixel, we can store the height of the covered
 * area instead.  The coverage of the pixel itself is the total
 * coverage minus the area of the uncovered area to the left of the
 * edge.  As it's faster to compute the uncovered area we only store
 * that and subtract it from the total coverage later when forming
 * spans to blit.
 *
 * The heights and areas are signed, with left edges of the polygon
 * having positive sign and right edges having negative sign.  When
 * two edges intersect they swap their left/rightness so their
 * contribution above and below the intersection point must be
 * computed separately. */
struct cell {
    struct cell   *next;
    int      x;
    int16_t    uncovered_area;
    int16_t    covered_height;
};

/* A cell list represents the scan line sparsely as cells ordered by
 * ascending x.  It is geared towards scanning the cells in order
 * using an internal cursor. */
struct cell_list {
    /* Sentinel nodes */
    struct cell head, tail;

    /* Cursor state for iterating through the cell list. */
    struct cell *cursor, *rewind;

    /* Cells in the cell list are owned by the cell list and are
     * allocated from this pool.  */
    struct {
  struct pool base[1];
  struct cell embedded[32];
    } cell_pool;
};

struct cell_pair {
    struct cell *cell1;
    struct cell *cell2;
};

/* The active list contains edges in the current scan line ordered by
 * the x-coordinate of the intercept of the edge and the scan line. */
struct active_list {
    /* Leftmost edge on the current scan line. */
    struct edge head, tail;

    /* A lower bound on the height of the active edges is used to
     * estimate how soon some active edge ends.  We can't advance the
     * scan conversion by a full pixel row if an edge ends somewhere
     * within it. */
    grid_scaled_y_t min_height;
    int is_vertical;
};

struct glitter_scan_converter {
    struct polygon  polygon[1];
    struct active_list  active[1];
    struct cell_list  coverages[1];

    cairo_half_open_span_t *spans;
    cairo_half_open_span_t spans_embedded[64];

    /* Clip box. */
    grid_scaled_x_t xmin, xmax;
    grid_scaled_y_t ymin, ymax;
};

static struct _pool_chunk *
_pool_chunk_init(
    struct _pool_chunk *p,
    struct _pool_chunk *prev_chunk,
    size_t capacity)
{
    p->prev_chunk = prev_chunk;
    p->size = 0;
    p->capacity = capacity;
    return p;
}

static struct _pool_chunk *
_pool_chunk_create(struct pool *pool, size_t size)
{
    struct _pool_chunk *p;

    p = _cairo_malloc (SIZEOF_POOL_CHUNK + size);
    if (unlikely (NULL == p))
  longjmp (*pool->jmp, _cairo_error (CAIRO_STATUS_NO_MEMORY));

    return _pool_chunk_init(p, pool->current, size);
}

static void
pool_init(struct pool *pool,
    jmp_buf *jmp,
    size_t default_capacity,
    size_t embedded_capacity)
{
    pool->jmp = jmp;
    pool->current = (void*) pool->sentinel;
    pool->first_free = NULL;
    pool->default_capacity = default_capacity;
    _pool_chunk_init(pool->current, NULL, embedded_capacity);
}

static void
pool_fini(struct pool *pool)
{
    struct _pool_chunk *p = pool->current;
    do {
  while (NULL != p) {
      struct _pool_chunk *prev = p->prev_chunk;
      if (p != (void *) pool->sentinel)
    free(p);
      p = prev;
  }
  p = pool->first_free;
  pool->first_free = NULL;
    } while (NULL != p);
}

/* Satisfy an allocation by first allocating a new large enough chunk
 * and adding it to the head of the pool's chunk list. This function
 * is called as a fallback if pool_alloc() couldn't do a quick
 * allocation from the current chunk in the pool. */
static void *
_pool_alloc_from_new_chunk(
    struct pool *pool,
    size_t size)
{
    struct _pool_chunk *chunk;
    void *obj;
    size_t capacity;

    /* If the allocation is smaller than the default chunk size then
     * try getting a chunk off the free list.  Force alloc of a new
     * chunk for large requests. */
    capacity = size;
    chunk = NULL;
    if (size < pool->default_capacity) {
  capacity = pool->default_capacity;
  chunk = pool->first_free;
  if (chunk) {
      pool->first_free = chunk->prev_chunk;
      _pool_chunk_init(chunk, pool->current, chunk->capacity);
  }
    }

    if (NULL == chunk)
  chunk = _pool_chunk_create (pool, capacity);
    pool->current = chunk;

    obj = ((unsigned char*)&chunk->data + chunk->size);
    chunk->size += size;
    return obj;
}

/* Allocate size bytes from the pool.  The first allocated address
 * returned from a pool is aligned to 8 bytes.  Subsequent
 * addresses will maintain alignment as long as multiples of 8 are
 * allocated.  Returns the address of a new memory area or %NULL on
 * allocation failures.  The pool retains ownership of the returned
 * memory. */
inline static void *
pool_alloc (struct pool *pool, size_t size)
{
    struct _pool_chunk *chunk = pool->current;

    if (size <= chunk->capacity - chunk->size) {
  void *obj = ((unsigned char*)&chunk->data + chunk->size);
  chunk->size += size;
  return obj;
    } else {
  return _pool_alloc_from_new_chunk(pool, size);
    }
}

/* Relinquish all pool_alloced memory back to the pool. */
static void
pool_reset (struct pool *pool)
{
    /* Transfer all used chunks to the chunk free list. */
    struct _pool_chunk *chunk = pool->current;
    if (chunk != (void *) pool->sentinel) {
  while (chunk->prev_chunk != (void *) pool->sentinel) {
      chunk = chunk->prev_chunk;
  }
  chunk->prev_chunk = pool->first_free;
  pool->first_free = pool->current;
    }
    /* Reset the sentinel as the current chunk. */
    pool->current = (void *) pool->sentinel;
    pool->current->size = 0;
}

/* Rewinds the cell list's cursor to the beginning.  After rewinding
 * we're good to cell_list_find() the cell any x coordinate. */
inline static void
cell_list_rewind (struct cell_list *cells)
{
    cells->cursor = &cells->head;
}

inline static void
cell_list_maybe_rewind (struct cell_list *cells, int x)
{
    if (x < cells->cursor->x) {
  cells->cursor = cells->rewind;
  if (x < cells->cursor->x)
      cells->cursor = &cells->head;
    }
}

inline static void
cell_list_set_rewind (struct cell_list *cells)
{
    cells->rewind = cells->cursor;
}

static void
cell_list_init(struct cell_list *cells, jmp_buf *jmp)
{
    pool_init(cells->cell_pool.base, jmp,
        256*sizeof(struct cell),
        sizeof(cells->cell_pool.embedded));
    cells->tail.next = NULL;
    cells->tail.x = INT_MAX;
    cells->head.x = INT_MIN;
    cells->head.next = &cells->tail;
    cell_list_rewind (cells);
}

static void
cell_list_fini(struct cell_list *cells)
{
    pool_fini (cells->cell_pool.base);
}

/* Empty the cell list.  This is called at the start of every pixel
 * row. */
inline static void
cell_list_reset (struct cell_list *cells)
{
    cell_list_rewind (cells);
    cells->head.next = &cells->tail;
    pool_reset (cells->cell_pool.base);
}

inline static struct cell *
cell_list_alloc (struct cell_list *cells,
     struct cell *tail,
     int x)
{
    struct cell *cell;

    cell = pool_alloc (cells->cell_pool.base, sizeof (struct cell));
    cell->next = tail->next;
    tail->next = cell;
    cell->x = x;
    *(uint32_t *)&cell->uncovered_area = 0;

    return cell;
}

/* Find a cell at the given x-coordinate.  Returns %NULL if a new cell
 * needed to be allocated but couldn't be.  Cells must be found with
 * non-decreasing x-coordinate until the cell list is rewound using
 * cell_list_rewind(). Ownership of the returned cell is retained by
 * the cell list. */
inline static struct cell *
cell_list_find (struct cell_list *cells, int x)
{
    struct cell *tail = cells->cursor;

    if (tail->x == x)
  return tail;

    while (1) {
  UNROLL3({
    if (tail->next->x > x)
      break;
    tail = tail->next;
  });
    }

    if (tail->x != x)
  tail = cell_list_alloc (cells, tail, x);
    return cells->cursor = tail;

}

/* Find two cells at x1 and x2.  This is exactly equivalent
 * to
 *
 *   pair.cell1 = cell_list_find(cells, x1);
 *   pair.cell2 = cell_list_find(cells, x2);
 *
 * except with less function call overhead. */
inline static struct cell_pair
cell_list_find_pair(struct cell_list *cells, int x1, int x2)
{
    struct cell_pair pair;

    pair.cell1 = cells->cursor;
    while (1) {
  UNROLL3({
    if (pair.cell1->next->x > x1)
      break;
    pair.cell1 = pair.cell1->next;
  });
    }
    if (pair.cell1->x != x1)
  pair.cell1 = cell_list_alloc (cells, pair.cell1, x1);

    pair.cell2 = pair.cell1;
    while (1) {
  UNROLL3({
    if (pair.cell2->next->x > x2)
      break;
    pair.cell2 = pair.cell2->next;
  });
    }
    if (pair.cell2->x != x2)
  pair.cell2 = cell_list_alloc (cells, pair.cell2, x2);

    cells->cursor = pair.cell2;
    return pair;
}

/* Add a subpixel span covering [x1, x2) to the coverage cells. */
inline static void
cell_list_add_subspan(struct cell_list *cells,
          grid_scaled_x_t x1,
          grid_scaled_x_t x2)
{
    int ix1, fx1;
    int ix2, fx2;

    if (x1 == x2)
  return;

    GRID_X_TO_INT_FRAC(x1, ix1, fx1);
    GRID_X_TO_INT_FRAC(x2, ix2, fx2);

    if (ix1 != ix2) {
  struct cell_pair p;
  p = cell_list_find_pair(cells, ix1, ix2);
  p.cell1->uncovered_area += 2*fx1;
  ++p.cell1->covered_height;
  p.cell2->uncovered_area -= 2*fx2;
  --p.cell2->covered_height;
    } else {
  struct cell *cell = cell_list_find(cells, ix1);
  cell->uncovered_area += 2*(fx1-fx2);
    }
}

inline static void full_step (struct edge *e)
{
    if (e->dy == 0)
  return;

    e->x.quo += e->dxdy_full.quo;
    e->x.rem += e->dxdy_full.rem;
    if (e->x.rem < 0) {
  e->x.quo--;
  e->x.rem += e->dy;
    } else if (e->x.rem >= e->dy) {
  ++e->x.quo;
  e->x.rem -= e->dy;
    }

    e->cell = e->x.quo + (e->x.rem >= e->dy/2);
}


/* Adds the analytical coverage of an edge crossing the current pixel
 * row to the coverage cells and advances the edge's x position to the
 * following row.
 *
 * This function is only called when we know that during this pixel row:
 *
 * 1) The relative order of all edges on the active list doesn't
 * change.  In particular, no edges intersect within this row to pixel
 * precision.
 *
 * 2) No new edges start in this row.
 *
 * 3) No existing edges end mid-row.
 *
 * This function depends on being called with all edges from the
 * active list in the order they appear on the list (i.e. with
 * non-decreasing x-coordinate.)  */
static void
cell_list_render_edge(struct cell_list *cells,
          struct edge *edge,
          int sign)
{
    struct quorem x1, x2;
    grid_scaled_x_t fx1, fx2;
    int ix1, ix2;

    x1 = edge->x;
    full_step (edge);
    x2 = edge->x;

    /* Step back from the sample location (half-subrow) to the pixel origin */
    if (edge->dy) {
  x1.quo -= edge->dxdy.quo / 2;
  x1.rem -= edge->dxdy.rem / 2;
  if (x1.rem < 0) {
      --x1.quo;
      x1.rem += edge->dy;
  } else if (x1.rem >= edge->dy) {
      ++x1.quo;
      x1.rem -= edge->dy;
  }

  x2.quo -= edge->dxdy.quo / 2;
  x2.rem -= edge->dxdy.rem / 2;
  if (x2.rem < 0) {
      --x2.quo;
      x2.rem += edge->dy;
  } else if (x2.rem >= edge->dy) {
      ++x2.quo;
      x2.rem -= edge->dy;
  }
    }

    GRID_X_TO_INT_FRAC(x1.quo, ix1, fx1);
    GRID_X_TO_INT_FRAC(x2.quo, ix2, fx2);

    cell_list_maybe_rewind(cells, MIN(ix1, ix2));

    /* Edge is entirely within a column? */
    if (ix1 == ix2) {
  /* We always know that ix1 is >= the cell list cursor in this
   * case due to the no-intersections precondition.  */
  struct cell *cell = cell_list_find(cells, ix1);
  cell->covered_height += sign*GRID_Y;
  cell->uncovered_area += sign*(fx1 + fx2)*GRID_Y;
  return;
    }

    /* Orient the edge left-to-right. */
    if (ix2 < ix1) {
  struct quorem tx;
  int t;

  t = ix1;
  ix1 = ix2;
  ix2 = t;

  t = fx1;
  fx1 = fx2;
  fx2 = t;

  tx = x1;
  x1 = x2;
  x2 = tx;
    }

    /* Add coverage for all pixels [ix1,ix2] on this row crossed
     * by the edge. */
    {
  struct cell_pair pair;
  struct quorem y;
  int64_t tmp, dx;
  int y_last;

  dx = (x2.quo - x1.quo) * edge->dy + (x2.rem - x1.rem);

  tmp = (ix1 + 1) * GRID_X * edge->dy;
  tmp -= x1.quo * edge->dy + x1.rem;
  tmp *= GRID_Y;

  y.quo = tmp / dx;
  y.rem = tmp % dx;

  /* When rendering a previous edge on the active list we may
   * advance the cell list cursor past the leftmost pixel of the
   * current edge even though the two edges don't intersect.
   * e.g. consider two edges going down and rightwards:
   *
   *  --\_+---\_+-----+-----+----
   *      \_    \_    |     |
   *      | \_  | \_  |     |
   *      |   \_|   \_|     |
   *      |     \_    \_    |
   *  ----+-----+-\---+-\---+----
   *
   * The left edge touches cells past the starting cell of the
   * right edge.  Fortunately such cases are rare.
   */

  pair = cell_list_find_pair(cells, ix1, ix1+1);
  pair.cell1->uncovered_area += sign*y.quo*(GRID_X + fx1);
  pair.cell1->covered_height += sign*y.quo;
  y_last = y.quo;

  if (ix1+1 < ix2) {
      struct cell *cell = pair.cell2;
      struct quorem dydx_full;

      dydx_full.quo = GRID_Y * GRID_X * edge->dy / dx;
      dydx_full.rem = GRID_Y * GRID_X * edge->dy % dx;

      ++ix1;
      do {
    y.quo += dydx_full.quo;
    y.rem += dydx_full.rem;
    if (y.rem >= dx) {
        y.quo++;
        y.rem -= dx;
    }

    cell->uncovered_area += sign*(y.quo - y_last)*GRID_X;
    cell->covered_height += sign*(y.quo - y_last);
    y_last = y.quo;

    ++ix1;
    cell = cell_list_find(cells, ix1);
      } while (ix1 != ix2);

      pair.cell2 = cell;
  }
  pair.cell2->uncovered_area += sign*(GRID_Y - y_last)*fx2;
  pair.cell2->covered_height += sign*(GRID_Y - y_last);
    }
}

static void
polygon_init (struct polygon *polygon, jmp_buf *jmp)
{
    polygon->ymin = polygon->ymax = 0;
    polygon->y_buckets = polygon->y_buckets_embedded;
    pool_init (polygon->edge_pool.base, jmp,
         8192 - sizeof (struct _pool_chunk),
         sizeof (polygon->edge_pool.embedded));
}

static void
polygon_fini (struct polygon *polygon)
{
    if (polygon->y_buckets != polygon->y_buckets_embedded)
  free (polygon->y_buckets);

    pool_fini (polygon->edge_pool.base);
}

/* Empties the polygon of all edges. The polygon is then prepared to
 * receive new edges and clip them to the vertical range
 * [ymin,ymax). */
static glitter_status_t
polygon_reset (struct polygon *polygon,
         grid_scaled_y_t ymin,
         grid_scaled_y_t ymax)
{
    unsigned h = ymax - ymin;
    unsigned num_buckets = EDGE_Y_BUCKET_INDEX(ymax + GRID_Y-1, ymin);

    pool_reset(polygon->edge_pool.base);

    if (unlikely (h > 0x7FFFFFFFU - GRID_Y))
  goto bail_no_mem; /* even if you could, you wouldn't want to. */

    if (polygon->y_buckets != polygon->y_buckets_embedded)
  free (polygon->y_buckets);

    polygon->y_buckets =  polygon->y_buckets_embedded;
    if (num_buckets > ARRAY_LENGTH (polygon->y_buckets_embedded)) {
  polygon->y_buckets = _cairo_malloc_ab (num_buckets,
                 sizeof (struct edge *));
  if (unlikely (NULL == polygon->y_buckets))
      goto bail_no_mem;
    }
    memset (polygon->y_buckets, 0, num_buckets * sizeof (struct edge *));

    polygon->ymin = ymin;
    polygon->ymax = ymax;
    return GLITTER_STATUS_SUCCESS;

bail_no_mem:
    polygon->ymin = 0;
    polygon->ymax = 0;
    return GLITTER_STATUS_NO_MEMORY;
}

static void
_polygon_insert_edge_into_its_y_bucket(struct polygon *polygon,
               struct edge *e)
{
    unsigned ix = EDGE_Y_BUCKET_INDEX(e->ytop, polygon->ymin);
    struct edge **ptail = &polygon->y_buckets[ix];
    e->next = *ptail;
    *ptail = e;
}

static void
active_list_reset (struct active_list *active)
{
    active->head.height_left = INT_MAX;
    active->head.dy = 0;
    active->head.cell = INT_MIN;
    active->head.prev = NULL;
    active->head.next = &active->tail;
    active->tail.prev = &active->head;
    active->tail.next = NULL;
    active->tail.cell = INT_MAX;
    active->tail.height_left = INT_MAX;
    active->tail.dy = 0;
    active->min_height = 0;
    active->is_vertical = 1;
}

static void
active_list_init(struct active_list *active)
{
    active_list_reset(active);
}

/*
 * Merge two sorted edge lists.
 * Input:
 *  - head_a: The head of the first list.
 *  - head_b: The head of the second list; head_b cannot be NULL.
 * Output:
 * Returns the head of the merged list.
 *
 * Implementation notes:
 * To make it fast (in particular, to reduce to an insertion sort whenever
 * one of the two input lists only has a single element) we iterate through
 * a list until its head becomes greater than the head of the other list,
 * then we switch their roles. As soon as one of the two lists is empty, we
 * just attach the other one to the current list and exit.
 * Writes to memory are only needed to "switch" lists (as it also requires
 * attaching to the output list the list which we will be iterating next) and
 * to attach the last non-empty list.
 */
static struct edge *
merge_sorted_edges (struct edge *head_a, struct edge *head_b)
{
    struct edge *head, **next, *prev;
    int32_t x;

    prev = head_a->prev;
    next = &head;
    if (head_a->cell <= head_b->cell) {
  head = head_a;
    } else {
  head = head_b;
  head_b->prev = prev;
  goto start_with_b;
    }

    do {
  x = head_b->cell;
  while (head_a != NULL && head_a->cell <= x) {
      prev = head_a;
      next = &head_a->next;
      head_a = head_a->next;
  }

  head_b->prev = prev;
  *next = head_b;
  if (head_a == NULL)
      return head;

start_with_b:
  x = head_a->cell;
  while (head_b != NULL && head_b->cell <= x) {
      prev = head_b;
      next = &head_b->next;
      head_b = head_b->next;
  }

  head_a->prev = prev;
  *next = head_a;
  if (head_b == NULL)
      return head;
    } while (1);
}

/*
 * Sort (part of) a list.
 * Input:
 *  - list: The list to be sorted; list cannot be NULL.
 *  - limit: Recursion limit.
 * Output:
 *  - head_out: The head of the sorted list containing the first 2^(level+1) elements of the
 *              input list; if the input list has fewer elements, head_out be a sorted list
 *              containing all the elements of the input list.
 * Returns the head of the list of unprocessed elements (NULL if the sorted list contains
 * all the elements of the input list).
 *
 * Implementation notes:
 * Special case single element list, unroll/inline the sorting of the first two elements.
 * Some tail recursion is used since we iterate on the bottom-up solution of the problem
 * (we start with a small sorted list and keep merging other lists of the same size to it).
 */
static struct edge *
sort_edges (struct edge *list,
      unsigned int level,
      struct edge **head_out)
{
    struct edge *head_other, *remaining;
    unsigned int i;

    head_other = list->next;

    if (head_other == NULL) {
  *head_out = list;
  return NULL;
    }

    remaining = head_other->next;
    if (list->cell <= head_other->cell) {
  *head_out = list;
  head_other->next = NULL;
    } else {
  *head_out = head_other;
  head_other->prev = list->prev;
  head_other->next = list;
  list->prev = head_other;
  list->next = NULL;
    }

    for (i = 0; i < level && remaining; i++) {
  remaining = sort_edges (remaining, i, &head_other);
  *head_out = merge_sorted_edges (*head_out, head_other);
    }

    return remaining;
}

 static struct edge *
merge_unsorted_edges (struct edge *head, struct edge *unsorted)
{
    sort_edges (unsorted, UINT_MAX, &unsorted);
    return merge_sorted_edges (head, unsorted);
}

/* Test if the edges on the active list can be safely advanced by a
 * full row without intersections or any edges ending. */
inline static int
can_do_full_row (struct active_list *active)
{
    const struct edge *e;
    int prev_x = INT_MIN;

    /* Recomputes the minimum height of all edges on the active
     * list if we have been dropping edges. */
    if (active->min_height <= 0) {
  int min_height = INT_MAX;
  int is_vertical = 1;

  e = active->head.next;
  while (NULL != e) {
      if (e->height_left < min_height)
    min_height = e->height_left;
      is_vertical &= e->dy == 0;
      e = e->next;
  }

  active->is_vertical = is_vertical;
  active->min_height = min_height;
    }

    if (active->min_height < GRID_Y)
  return 0;

    /* Check for intersections as no edges end during the next row. */
    for (e = active->head.next; e != &active->tail; e = e->next) {
  int cell;

  if (e->dy) {
      struct quorem x = e->x;
      x.quo += e->dxdy_full.quo;
      x.rem += e->dxdy_full.rem;
      if (x.rem < 0) {
    x.quo--;
    x.rem += e->dy;
      } else if (x.rem >= e->dy) {
    x.quo++;
    x.rem -= e->dy;
      }
      cell = x.quo + (x.rem >= e->dy/2);
  } else
      cell = e->cell;

  if (cell < prev_x)
      return 0;

  prev_x = cell;
    }

    return 1;
}

/* Merges edges on the given subpixel row from the polygon to the
 * active_list. */
inline static void
active_list_merge_edges_from_bucket(struct active_list *active,
            struct edge *edges)
{
    active->head.next = merge_unsorted_edges (active->head.next, edges);
}

inline static int
polygon_fill_buckets (struct active_list *active,
          struct edge *edge,
          int y,
          struct edge **buckets)
{
    grid_scaled_y_t min_height = active->min_height;
    int is_vertical = active->is_vertical;
    int max_suby = 0;

    while (edge) {
  struct edge *next = edge->next;
  int suby = edge->ytop - y;
  if (buckets[suby])
      buckets[suby]->prev = edge;
  edge->next = buckets[suby];
  edge->prev = NULL;
  buckets[suby] = edge;
  if (edge->height_left < min_height)
      min_height = edge->height_left;
  is_vertical &= edge->dy == 0;
  edge = next;
  if (suby > max_suby)
    max_suby = suby;
    }

    active->is_vertical = is_vertical;
    active->min_height = min_height;

    return max_suby;
}

static void step (struct edge *edge)
{
    if (edge->dy == 0)
  return;

    edge->x.quo += edge->dxdy.quo;
    edge->x.rem += edge->dxdy.rem;
    if (edge->x.rem < 0) {
  --edge->x.quo;
  edge->x.rem += edge->dy;
    } else if (edge->x.rem >= edge->dy) {
  ++edge->x.quo;
  edge->x.rem -= edge->dy;
    }

    edge->cell = edge->x.quo + (edge->x.rem >= edge->dy/2);
}

inline static void
sub_row (struct active_list *active,
   struct cell_list *coverages,
   unsigned int mask)
{
    struct edge *edge = active->head.next;
    int xstart = INT_MIN, prev_x = INT_MIN;
    int winding = 0;

    cell_list_rewind (coverages);

    while (&active->tail != edge) {
  struct edge *next = edge->next;
  int xend = edge->cell;

  if (--edge->height_left) {
      step (edge);

      if (edge->cell < prev_x) {
    struct edge *pos = edge->prev;
    pos->next = next;
    next->prev = pos;
    do {
        pos = pos->prev;
    } while (edge->cell < pos->cell);
    pos->next->prev = edge;
    edge->next = pos->next;
    edge->prev = pos;
    pos->next = edge;
      } else
    prev_x = edge->cell;
      active->min_height = -1;
  } else {
      edge->prev->next = next;
      next->prev = edge->prev;
  }

  winding += edge->dir;
  if ((winding & mask) == 0) {
      if (next->cell != xend) {
    cell_list_add_subspan (coverages, xstart, xend);
    xstart = INT_MIN;
      }
  } else if (xstart == INT_MIN)
      xstart = xend;

  edge = next;
    }
}

inline static void dec (struct active_list *a, struct edge *e, int h)
{
    e->height_left -= h;
    if (e->height_left == 0) {
  e->prev->next = e->next;
  e->next->prev = e->prev;
  a->min_height = -1;
    }
}

static void
full_row (struct active_list *active,
    struct cell_list *coverages,
    unsigned int mask)
{
    struct edge *left = active->head.next;

    while (&active->tail != left) {
  struct edge *right;
  int winding;

  dec (active, left, GRID_Y);

  winding = left->dir;
  right = left->next;
  do {
      dec (active, right, GRID_Y);

      winding += right->dir;
      if ((winding & mask) == 0 && right->next->cell != right->cell)
    break;

      full_step (right);

      right = right->next;
  } while (1);

  cell_list_set_rewind (coverages);
  cell_list_render_edge (coverages, left, +1);
  cell_list_render_edge (coverages, right, -1);

  left = right->next;
    }
}

static void
_glitter_scan_converter_init(glitter_scan_converter_t *converter, jmp_buf *jmp)
{
    polygon_init(converter->polygon, jmp);
    active_list_init(converter->active);
    cell_list_init(converter->coverages, jmp);
    converter->xmin=0;
    converter->ymin=0;
    converter->xmax=0;
    converter->ymax=0;
}

static void
_glitter_scan_converter_fini(glitter_scan_converter_t *self)
{
    if (self->spans != self->spans_embedded)
  free (self->spans);

    polygon_fini(self->polygon);
    cell_list_fini(self->coverages);

    self->xmin=0;
    self->ymin=0;
    self->xmax=0;
    self->ymax=0;
}

static grid_scaled_t
int_to_grid_scaled(int i, int scale)
{
    /* Clamp to max/min representable scaled number. */
    if (i >= 0) {
  if (i >= INT_MAX/scale)
      i = INT_MAX/scale;
    }
    else {
  if (i <= INT_MIN/scale)
      i = INT_MIN/scale;
    }
    return i*scale;
}

#define int_to_grid_scaled_x(x) int_to_grid_scaled((x), GRID_X)
#define int_to_grid_scaled_y(x) int_to_grid_scaled((x), GRID_Y)

I glitter_status_t
glitter_scan_converter_reset(
           glitter_scan_converter_t *converter,
           int xmin, int ymin,
           int xmax, int ymax)
{
    glitter_status_t status;
    int max_num_spans;

    converter->xmin = 0; converter->xmax = 0;
    converter->ymin = 0; converter->ymax = 0;

    max_num_spans = xmax - xmin + 1;

    if (max_num_spans > ARRAY_LENGTH(converter->spans_embedded)) {
  converter->spans = _cairo_malloc_ab (max_num_spans,
               sizeof (cairo_half_open_span_t));
  if (unlikely (converter->spans == NULL))
      return _cairo_error (CAIRO_STATUS_NO_MEMORY);
    } else
  converter->spans = converter->spans_embedded;

    xmin = int_to_grid_scaled_x(xmin);
    ymin = int_to_grid_scaled_y(ymin);
    xmax = int_to_grid_scaled_x(xmax);
    ymax = int_to_grid_scaled_y(ymax);

    active_list_reset(converter->active);
    cell_list_reset(converter->coverages);
    status = polygon_reset(converter->polygon, ymin, ymax);
    if (status)
  return status;

    converter->xmin = xmin;
    converter->xmax = xmax;
    converter->ymin = ymin;
    converter->ymax = ymax;
    return GLITTER_STATUS_SUCCESS;
}

/* INPUT_TO_GRID_X/Y (in_coord, out_grid_scaled, grid_scale)
 *   These macros convert an input coordinate in the client's
 *   device space to the rasterisation grid.
 */
/* Gah.. this bit of ugly defines INPUT_TO_GRID_X/Y so as to use
 * shifts if possible, and something saneish if not.
 */
#if !defined(INPUT_TO_GRID_Y) && defined(GRID_Y_BITS) && GRID_Y_BITS <= GLITTER_INPUT_BITS
#  define INPUT_TO_GRID_Y(in, out) (out) = (in) >> (GLITTER_INPUT_BITS - GRID_Y_BITS)
#else
#  define INPUT_TO_GRID_Y(in, out) INPUT_TO_GRID_general(in, out, GRID_Y)
#endif

#if !defined(INPUT_TO_GRID_X) && defined(GRID_X_BITS) && GRID_X_BITS <= GLITTER_INPUT_BITS
#  define INPUT_TO_GRID_X(in, out) (out) = (in) >> (GLITTER_INPUT_BITS - GRID_X_BITS)
#else
#  define INPUT_TO_GRID_X(in, out) INPUT_TO_GRID_general(in, out, GRID_X)
#endif

#define INPUT_TO_GRID_general(in, out, grid_scale) do {   \
    long long tmp__ = (long long)(grid_scale) * (in); \
    tmp__ += 1 << (GLITTER_INPUT_BITS-1);      \
    tmp__ >>= GLITTER_INPUT_BITS;       \
    (out) = tmp__;            \
} while (0)

inline static void
polygon_add_edge (struct polygon *polygon,
      const cairo_edge_t *edge)
{
    struct edge *e;
    grid_scaled_y_t ytop, ybot;
    const cairo_point_t *p1, *p2;

    INPUT_TO_GRID_Y (edge->top, ytop);
    if (ytop < polygon->ymin)
      ytop = polygon->ymin;

    INPUT_TO_GRID_Y (edge->bottom, ybot);
    if (ybot > polygon->ymax)
      ybot = polygon->ymax;

    if (ybot <= ytop)
      return;

    e = pool_alloc (polygon->edge_pool.base, sizeof (struct edge));

    e->ytop = ytop;
    e->height_left = ybot - ytop;
    if (edge->line.p2.y > edge->line.p1.y) {
      e->dir = edge->dir;
      p1 = &edge->line.p1;
      p2 = &edge->line.p2;
    } else {
      e->dir = -edge->dir;
      p1 = &edge->line.p2;
      p2 = &edge->line.p1;
    }

    if (p2->x == p1->x) {
  e->cell = p1->x;
  e->x.quo = p1->x;
  e->x.rem = 0;
  e->dxdy.quo = e->dxdy.rem = 0;
  e->dxdy_full.quo = e->dxdy_full.rem = 0;
  e->dy = 0;
    } else {
  int64_t Ex, Ey, tmp;

  Ex = (int64_t)(p2->x - p1->x) * GRID_X;
  Ey = (int64_t)(p2->y - p1->y) * GRID_Y * (2 << GLITTER_INPUT_BITS);

  e->dxdy.quo = Ex * (2 << GLITTER_INPUT_BITS) / Ey;
  e->dxdy.rem = Ex * (2 << GLITTER_INPUT_BITS) % Ey;

  tmp = (int64_t)(2*ytop + 1) << GLITTER_INPUT_BITS;
  tmp -= (int64_t)p1->y * GRID_Y * 2;
  tmp *= Ex;
  e->x.quo = tmp / Ey;
  e->x.rem = tmp % Ey;

#if GRID_X_BITS == GLITTER_INPUT_BITS
  e->x.quo += p1->x;
#else
  tmp = (int64_t)p1->x * GRID_X;
  e->x.quo += tmp >> GLITTER_INPUT_BITS;
  e->x.rem += ((tmp & ((1 << GLITTER_INPUT_BITS) - 1)) * Ey) / (1 << GLITTER_INPUT_BITS);
#endif

  if (e->x.rem < 0) {
    e->x.quo--;
    e->x.rem += Ey;
  } else  if (e->x.rem >= Ey) {
    e->x.quo++;
    e->x.rem -= Ey;
  }

  if (e->height_left >= GRID_Y) {
      tmp = Ex * (2 * GRID_Y << GLITTER_INPUT_BITS);
      e->dxdy_full.quo = tmp / Ey;
      e->dxdy_full.rem = tmp % Ey;
  } else
      e->dxdy_full.quo = e->dxdy_full.rem = 0;

  e->cell = e->x.quo + (e->x.rem >= Ey/2);
  e->dy = Ey;
    }

    _polygon_insert_edge_into_its_y_bucket (polygon, e);
}

/* Add a new polygon edge from pixel (x1,y1) to (x2,y2) to the scan
 * converter.  The coordinates represent pixel positions scaled by
 * 2**GLITTER_PIXEL_BITS.  If this function fails then the scan
 * converter should be reset or destroyed.  Dir must be +1 or -1,
 * with the latter reversing the orientation of the edge. */
I void
glitter_scan_converter_add_edge (glitter_scan_converter_t *converter,
         const cairo_edge_t *edge)
{
    polygon_add_edge (converter->polygon, edge);
}

static void
step_edges (struct active_list *active, int count)
{
    struct edge *edge;

    count *= GRID_Y;
    for (edge = active->head.next; edge != &active->tail; edge = edge->next) {
  edge->height_left -= count;
  if (! edge->height_left) {
      edge->prev->next = edge->next;
      edge->next->prev = edge->prev;
      active->min_height = -1;
  }
    }
}

static glitter_status_t
blit_a8 (struct cell_list *cells,
   cairo_span_renderer_t *renderer,
   cairo_half_open_span_t *spans,
   int y, int height,
   int xmin, int xmax)
{
    struct cell *cell = cells->head.next;
    int prev_x = xmin, last_x = -1;
    int16_t cover = 0, last_cover = 0;
    unsigned num_spans;

    if (cell == &cells->tail)
  return CAIRO_STATUS_SUCCESS;

    /* Skip cells to the left of the clip region. */
    while (cell->x < xmin) {
  cover += cell->covered_height;
  cell = cell->next;
    }
    cover *= GRID_X*2;

    /* Form the spans from the coverages and areas. */
    num_spans = 0;
    for (; cell->x < xmax; cell = cell->next) {
  int x = cell->x;
  int16_t area;

  if (x > prev_x && cover != last_cover) {
      spans[num_spans].x = prev_x;
      spans[num_spans].coverage = GRID_AREA_TO_ALPHA (cover);
      last_cover = cover;
      last_x = prev_x;
      ++num_spans;
  }

  cover += cell->covered_height*GRID_X*2;
  area = cover - cell->uncovered_area;

  if (area != last_cover) {
      spans[num_spans].x = x;
      spans[num_spans].coverage = GRID_AREA_TO_ALPHA (area);
      last_cover = area;
      last_x = x;
      ++num_spans;
  }

  prev_x = x+1;
    }

    if (prev_x <= xmax && cover != last_cover) {
  spans[num_spans].x = prev_x;
  spans[num_spans].coverage = GRID_AREA_TO_ALPHA (cover);
  last_cover = cover;
  last_x = prev_x;
  ++num_spans;
    }

    if (last_x < xmax && last_cover) {
  spans[num_spans].x = xmax;
  spans[num_spans].coverage = 0;
  ++num_spans;
    }

    /* Dump them into the renderer. */
    return renderer->render_rows (renderer, y, height, spans, num_spans);
}

#define GRID_AREA_TO_A1(A)  ((GRID_AREA_TO_ALPHA (A) > 127) ? 255 : 0)
static glitter_status_t
blit_a1 (struct cell_list *cells,
   cairo_span_renderer_t *renderer,
   cairo_half_open_span_t *spans,
   int y, int height,
   int xmin, int xmax)
{
    struct cell *cell = cells->head.next;
    int prev_x = xmin, last_x = -1;
    int16_t cover = 0;
    uint8_t coverage, last_cover = 0;
    unsigned num_spans;

    if (cell == &cells->tail)
  return CAIRO_STATUS_SUCCESS;

    /* Skip cells to the left of the clip region. */
    while (cell->x < xmin) {
  cover += cell->covered_height;
  cell = cell->next;
    }
    cover *= GRID_X*2;

    /* Form the spans from the coverages and areas. */
    num_spans = 0;
    for (; cell->x < xmax; cell = cell->next) {
  int x = cell->x;
  int16_t area;

  coverage = GRID_AREA_TO_A1 (cover);
  if (x > prev_x && coverage != last_cover) {
      last_x = spans[num_spans].x = prev_x;
      last_cover = spans[num_spans].coverage = coverage;
      ++num_spans;
  }

  cover += cell->covered_height*GRID_X*2;
  area = cover - cell->uncovered_area;

  coverage = GRID_AREA_TO_A1 (area);
  if (coverage != last_cover) {
      last_x = spans[num_spans].x = x;
      last_cover = spans[num_spans].coverage = coverage;
      ++num_spans;
  }

  prev_x = x+1;
    }

    coverage = GRID_AREA_TO_A1 (cover);
    if (prev_x <= xmax && coverage != last_cover) {
  last_x = spans[num_spans].x = prev_x;
  last_cover = spans[num_spans].coverage = coverage;
  ++num_spans;
    }

    if (last_x < xmax && last_cover) {
  spans[num_spans].x = xmax;
  spans[num_spans].coverage = 0;
  ++num_spans;
    }
    if (num_spans == 1)
  return CAIRO_STATUS_SUCCESS;

    /* Dump them into the renderer. */
    return renderer->render_rows (renderer, y, height, spans, num_spans);
}


I void
glitter_scan_converter_render(glitter_scan_converter_t *converter,
            unsigned int winding_mask,
            int antialias,
            cairo_span_renderer_t *renderer)
{
    int i, j;
    int ymax_i = converter->ymax / GRID_Y;
    int ymin_i = converter->ymin / GRID_Y;
    int xmin_i, xmax_i;
    int h = ymax_i - ymin_i;
    struct polygon *polygon = converter->polygon;
    struct cell_list *coverages = converter->coverages;
    struct active_list *active = converter->active;
    struct edge *buckets[GRID_Y] = { 0 };

    xmin_i = converter->xmin / GRID_X;
    xmax_i = converter->xmax / GRID_X;
    if (xmin_i >= xmax_i)
  return;

    /* Render each pixel row. */
    for (i = 0; i < h; i = j) {
  int do_full_row = 0;

  j = i + 1;

  /* Determine if we can ignore this row or use the full pixel
   * stepper. */
  if (polygon_fill_buckets (active,
          polygon->y_buckets[i],
          (i+ymin_i)*GRID_Y,
          buckets) == 0) {
      if (buckets[0]) {
    active_list_merge_edges_from_bucket (active, buckets[0]);
    buckets[0] = NULL;
      }

      if (active->head.next == &active->tail) {
    active->min_height = INT_MAX;
    active->is_vertical = 1;
    for (; j < h && ! polygon->y_buckets[j]; j++)
        ;
    continue;
      }

      do_full_row = can_do_full_row (active);
  }

  if (do_full_row) {
      /* Step by a full pixel row's worth. */
      full_row (active, coverages, winding_mask);

      if (active->is_vertical) {
    while (j < h &&
           polygon->y_buckets[j] == NULL &&
           active->min_height >= 2*GRID_Y)
    {
        active->min_height -= GRID_Y;
        j++;
    }
    if (j != i + 1)
        step_edges (active, j - (i + 1));
      }
  } else {
      int sub;

      /* Subsample this row. */
      for (sub = 0; sub < GRID_Y; sub++) {
    if (buckets[sub]) {
        active_list_merge_edges_from_bucket (active, buckets[sub]);
        buckets[sub] = NULL;
    }
    sub_row (active, coverages, winding_mask);
      }
  }

  if (antialias)
      blit_a8 (coverages, renderer, converter->spans,
         i+ymin_i, j-i, xmin_i, xmax_i);
  else
      blit_a1 (coverages, renderer, converter->spans,
         i+ymin_i, j-i, xmin_i, xmax_i);
  cell_list_reset (coverages);

  active->min_height -= GRID_Y;
    }
}

struct _cairo_tor_scan_converter {
    cairo_scan_converter_t base;

    glitter_scan_converter_t converter[1];
    cairo_fill_rule_t fill_rule;
    cairo_antialias_t antialias;

    jmp_buf jmp;
};

typedef struct _cairo_tor_scan_converter cairo_tor_scan_converter_t;

static void
_cairo_tor_scan_converter_destroy (void *converter)
{
    cairo_tor_scan_converter_t *self = converter;
    if (self == NULL) {
  return;
    }
    _glitter_scan_converter_fini (self->converter);
    free(self);
}

cairo_status_t
_cairo_tor_scan_converter_add_polygon (void   *converter,
               const cairo_polygon_t *polygon)
{
    cairo_tor_scan_converter_t *self = converter;
    cairo_status_t status;
    int i;

#if 0
    FILE *file = fopen ("polygon.txt", "w");
    _cairo_debug_print_polygon (file, polygon);
    fclose (file);
#endif

    if ((status = setjmp (self->jmp)))
  return _cairo_scan_converter_set_error (self, _cairo_error (status));

    for (i = 0; i < polygon->num_edges; i++)
   glitter_scan_converter_add_edge (self->converter, &polygon->edges[i]);

    return CAIRO_STATUS_SUCCESS;
}

static cairo_status_t
_cairo_tor_scan_converter_generate (void      *converter,
            cairo_span_renderer_t *renderer)
{
    cairo_tor_scan_converter_t *self = converter;
    cairo_status_t status;

    if ((status = setjmp (self->jmp)))
  return _cairo_scan_converter_set_error (self, _cairo_error (status));

    glitter_scan_converter_render (self->converter,
           self->fill_rule == CAIRO_FILL_RULE_WINDING ? ~0 : 1,
           self->antialias != CAIRO_ANTIALIAS_NONE,
           renderer);
    return CAIRO_STATUS_SUCCESS;
}

cairo_scan_converter_t *
_cairo_tor_scan_converter_create (int     xmin,
          int     ymin,
          int     xmax,
          int     ymax,
          cairo_fill_rule_t fill_rule,
          cairo_antialias_t antialias)
{
    cairo_tor_scan_converter_t *self;
    cairo_status_t status;

    self = _cairo_calloc (sizeof(struct _cairo_tor_scan_converter));
    if (unlikely (self == NULL)) {
  status = _cairo_error (CAIRO_STATUS_NO_MEMORY);
  goto bail_nomem;
    }

    self->base.destroy = _cairo_tor_scan_converter_destroy;
    self->base.generate = _cairo_tor_scan_converter_generate;

    _glitter_scan_converter_init (self->converter, &self->jmp);
    status = glitter_scan_converter_reset (self->converter,
             xmin, ymin, xmax, ymax);
    if (unlikely (status))
  goto bail;

    self->fill_rule = fill_rule;
    self->antialias = antialias;

    return &self->base;

 bail:
    self->base.destroy(&self->base);
 bail_nomem:
    return _cairo_scan_converter_create_in_error (status);
}

Coverage Report

Created: 2026-11-10 07:41