/src/harfbuzz/src/hb-ot-shaper-indic.cc

Source
/*
 * Copyright © 2011,2012  Google, Inc.
 *
 *  This is part of HarfBuzz, a text shaping library.
 *
 * Permission is hereby granted, without written agreement and without
 * license or royalty fees, to use, copy, modify, and distribute this
 * software and its documentation for any purpose, provided that the
 * above copyright notice and the following two paragraphs appear in
 * all copies of this software.
 *
 * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR
 * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
 * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN
 * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
 * DAMAGE.
 *
 * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
 * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
 * FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
 * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO
 * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
 *
 * Google Author(s): Behdad Esfahbod
 */

#include "hb.hh"

#ifndef HB_NO_OT_SHAPE

#include "hb-ot-shaper-indic.hh"
#include "hb-ot-shaper-indic-machine.hh"
#include "hb-ot-shaper-vowel-constraints.hh"
#include "hb-ot-layout.hh"


/*
 * Indic shaper.
 */


static inline void
set_indic_properties (hb_glyph_info_t &info)
{
  hb_codepoint_t u = info.codepoint;
  unsigned int type = hb_indic_get_categories (u);

  info.indic_category() = (indic_category_t) (type & 0xFFu);
  info.indic_position() = (indic_position_t) (type >> 8);
}


static inline bool
is_one_of (const hb_glyph_info_t &info, unsigned int flags)
{
  /* If it ligated, all bets are off. */
  if (_hb_glyph_info_ligated (&info)) return false;
  return !!(FLAG_UNSAFE (info.indic_category()) & flags);
}

/* Note:
 *
 * We treat Vowels and placeholders as if they were consonants.  This is safe because Vowels
 * cannot happen in a consonant syllable.  The plus side however is, we can call the
 * consonant syllable logic from the vowel syllable function and get it all right!
 *
 * Keep in sync with consonant_categories in the generator. */
#define CONSONANT_FLAGS_INDIC (FLAG (I_Cat(C)) | FLAG (I_Cat(CS)) | FLAG (I_Cat(Ra)) | FLAG (I_Cat(CM)) | FLAG (I_Cat(V)) | FLAG (I_Cat(PLACEHOLDER)) | FLAG (I_Cat(DOTTEDCIRCLE)))

static inline bool
is_consonant (const hb_glyph_info_t &info)
{
  return is_one_of (info, CONSONANT_FLAGS_INDIC);
}

#define JOINER_FLAGS (FLAG (I_Cat(ZWJ)) | FLAG (I_Cat(ZWNJ)))

static inline bool
is_joiner (const hb_glyph_info_t &info)
{
  return is_one_of (info, JOINER_FLAGS);
}

static inline bool
is_halant (const hb_glyph_info_t &info)
{
  return is_one_of (info, FLAG (I_Cat(H)));
}

struct hb_indic_would_substitute_feature_t
{
  void init (const hb_ot_map_t *map, hb_tag_t feature_tag, bool zero_context_)
  {
    zero_context = zero_context_;
    lookups = map->get_stage_lookups (0/*GSUB*/,
              map->get_feature_stage (0/*GSUB*/, feature_tag));
  }

  bool would_substitute (const hb_codepoint_t *glyphs,
       unsigned int          glyphs_count,
       hb_face_t            *face,
       hb_buffer_t          *buffer) const
  {
    if (unlikely (!buffer->successful)) return false;
    for (const auto &lookup : lookups)
      if (hb_ot_layout_lookup_would_substitute_with_buffer (face, lookup.index,
                  glyphs, glyphs_count,
                  zero_context, buffer))
  return true;
    return false;
  }

  private:
  hb_array_t<const hb_ot_map_t::lookup_map_t> lookups;
  bool zero_context;
};


/*
 * Indic configurations.  Note that we do not want to keep every single script-specific
 * behavior in these tables necessarily.  This should mainly be used for per-script
 * properties that are cheaper keeping here, than in the code.  Ie. if, say, one and
 * only one script has an exception, that one script can be if'ed directly in the code,
 * instead of adding a new flag in these structs.
 */

enum reph_position_t {
  REPH_POS_AFTER_MAIN  = POS_AFTER_MAIN,
  REPH_POS_BEFORE_SUB  = POS_BEFORE_SUB,
  REPH_POS_AFTER_SUB   = POS_AFTER_SUB,
  REPH_POS_BEFORE_POST = POS_BEFORE_POST,
  REPH_POS_AFTER_POST  = POS_AFTER_POST
};
enum reph_mode_t {
  REPH_MODE_IMPLICIT,  /* Reph formed out of initial Ra,H sequence. */
  REPH_MODE_EXPLICIT,  /* Reph formed out of initial Ra,H,ZWJ sequence. */
  REPH_MODE_LOG_REPHA  /* Encoded Repha character, needs reordering. */
};
enum blwf_mode_t {
  BLWF_MODE_PRE_AND_POST, /* Below-forms feature applied to pre-base and post-base. */
  BLWF_MODE_POST_ONLY     /* Below-forms feature applied to post-base only. */
};
struct indic_config_t
{
  hb_script_t     script;
  bool            has_old_spec;
  hb_codepoint_t  virama;
  reph_position_t reph_pos;
  reph_mode_t     reph_mode;
  blwf_mode_t     blwf_mode;
};

static const indic_config_t indic_configs[] =
{
  /* Default.  Should be first. */
  {HB_SCRIPT_INVALID, false,      0,REPH_POS_BEFORE_POST,REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST},
  {HB_SCRIPT_DEVANAGARI,true, 0x094Du,REPH_POS_BEFORE_POST,REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST},
  {HB_SCRIPT_BENGALI, true, 0x09CDu,REPH_POS_AFTER_SUB,  REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST},
  {HB_SCRIPT_GURMUKHI,  true, 0x0A4Du,REPH_POS_BEFORE_SUB, REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST},
  {HB_SCRIPT_GUJARATI,  true, 0x0ACDu,REPH_POS_BEFORE_POST,REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST},
  {HB_SCRIPT_ORIYA, true, 0x0B4Du,REPH_POS_AFTER_MAIN, REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST},
  {HB_SCRIPT_TAMIL, true, 0x0BCDu,REPH_POS_AFTER_POST, REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST},
  {HB_SCRIPT_TELUGU,  true, 0x0C4Du,REPH_POS_AFTER_POST, REPH_MODE_EXPLICIT, BLWF_MODE_POST_ONLY},
  {HB_SCRIPT_KANNADA, true, 0x0CCDu,REPH_POS_AFTER_POST, REPH_MODE_IMPLICIT, BLWF_MODE_POST_ONLY},
  {HB_SCRIPT_MALAYALAM, true, 0x0D4Du,REPH_POS_AFTER_MAIN, REPH_MODE_LOG_REPHA,BLWF_MODE_PRE_AND_POST},
};


static const hb_ot_map_feature_t
indic_features[] =
{
  /*
   * Basic features.
   * These features are applied in order, one at a time, after initial_reordering,
   * constrained to the syllable.
   */
  {HB_TAG('n','u','k','t'), F_GLOBAL_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('a','k','h','n'), F_GLOBAL_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('r','p','h','f'),        F_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('r','k','r','f'), F_GLOBAL_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('p','r','e','f'),        F_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('b','l','w','f'),        F_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('a','b','v','f'),        F_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('h','a','l','f'),        F_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('p','s','t','f'),        F_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('v','a','t','u'), F_GLOBAL_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('c','j','c','t'), F_GLOBAL_MANUAL_JOINERS | F_PER_SYLLABLE},
  /*
   * Other features.
   * These features are applied all at once, after final_reordering, constrained
   * to the syllable.
   * Default Bengali font in Windows for example has intermixed
   * lookups for init,pres,abvs,blws features.
   */
  {HB_TAG('i','n','i','t'),        F_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('p','r','e','s'), F_GLOBAL_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('a','b','v','s'), F_GLOBAL_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('b','l','w','s'), F_GLOBAL_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('p','s','t','s'), F_GLOBAL_MANUAL_JOINERS | F_PER_SYLLABLE},
  {HB_TAG('h','a','l','n'), F_GLOBAL_MANUAL_JOINERS | F_PER_SYLLABLE},
};

/*
 * Must be in the same order as the indic_features array.
 */
enum {
  _INDIC_NUKT,
  _INDIC_AKHN,
  INDIC_RPHF,
  _INDIC_RKRF,
  INDIC_PREF,
  INDIC_BLWF,
  INDIC_ABVF,
  INDIC_HALF,
  INDIC_PSTF,
  _INDIC_VATU,
  _INDIC_CJCT,

  INDIC_INIT,
  _INDIC_PRES,
  _INDIC_ABVS,
  _INDIC_BLWS,
  _INDIC_PSTS,
  _INDIC_HALN,

  INDIC_NUM_FEATURES,
  INDIC_BASIC_FEATURES = INDIC_INIT, /* Don't forget to update this! */
};

static bool
setup_syllables_indic (const hb_ot_shape_plan_t *plan,
           hb_font_t *font,
           hb_buffer_t *buffer);
static bool
initial_reordering_indic (const hb_ot_shape_plan_t *plan,
        hb_font_t *font,
        hb_buffer_t *buffer);
static bool
final_reordering_indic (const hb_ot_shape_plan_t *plan,
      hb_font_t *font,
      hb_buffer_t *buffer);

static void
collect_features_indic (hb_ot_shape_planner_t *plan)
{
  hb_ot_map_builder_t *map = &plan->map;

  /* Do this before any lookups have been applied. */
  map->add_gsub_pause (setup_syllables_indic);

  map->enable_feature (HB_TAG('l','o','c','l'), F_PER_SYLLABLE);
  /* The Indic specs do not require ccmp, but we apply it here since if
   * there is a use of it, it's typically at the beginning. */
  map->enable_feature (HB_TAG('c','c','m','p'), F_PER_SYLLABLE);


  unsigned int i = 0;
  map->add_gsub_pause (initial_reordering_indic);

  for (; i < INDIC_BASIC_FEATURES; i++) {
    map->add_feature (indic_features[i]);
    map->add_gsub_pause (nullptr);
  }

  map->add_gsub_pause (final_reordering_indic);

  for (; i < INDIC_NUM_FEATURES; i++)
    map->add_feature (indic_features[i]);
}

static void
override_features_indic (hb_ot_shape_planner_t *plan)
{
  plan->map.disable_feature (HB_TAG('l','i','g','a'));
  plan->map.add_gsub_pause (hb_syllabic_clear_var); // Don't need syllables anymore, use stop to free buffer var
}


struct indic_shape_plan_t
{
  bool load_virama_glyph (hb_font_t *font, hb_codepoint_t *pglyph) const
  {
    hb_codepoint_t glyph = virama_glyph;
    if (unlikely (glyph == (hb_codepoint_t) -1))
    {
      if (!config->virama || !font->get_nominal_glyph (config->virama, &glyph))
  glyph = 0;
      /* Technically speaking, the spec says we should apply 'locl' to virama too.
       * Maybe one day... */

      /* Our get_nominal_glyph() function needs a font, so we can't get the virama glyph
       * during shape planning...  Instead, overwrite it here. */
      virama_glyph = (int) glyph;
    }

    *pglyph = glyph;
    return glyph != 0;
  }

  const indic_config_t *config;

  bool is_old_spec;
  mutable hb_atomic_t<hb_codepoint_t> virama_glyph;

  hb_indic_would_substitute_feature_t rphf;
  hb_indic_would_substitute_feature_t pref;
  hb_indic_would_substitute_feature_t blwf;
  hb_indic_would_substitute_feature_t pstf;
  hb_indic_would_substitute_feature_t vatu;

  hb_mask_t mask_array[INDIC_NUM_FEATURES];
};

static void *
data_create_indic (const hb_ot_shape_plan_t *plan)
{
  indic_shape_plan_t *indic_plan = (indic_shape_plan_t *) hb_calloc (1, sizeof (indic_shape_plan_t));
  if (unlikely (!indic_plan))
    return nullptr;

  indic_plan->config = &indic_configs[0];
  for (unsigned int i = 1; i < ARRAY_LENGTH (indic_configs); i++)
    if (plan->props.script == indic_configs[i].script) {
      indic_plan->config = &indic_configs[i];
      break;
    }

  indic_plan->is_old_spec = indic_plan->config->has_old_spec && ((plan->map.chosen_script[0] & 0x000000FFu) != '2');
  indic_plan->virama_glyph = -1;

  /* Use zero-context would_substitute() matching for new-spec of the main
   * Indic scripts, and scripts with one spec only, but not for old-specs.
   * The new-spec for all dual-spec scripts says zero-context matching happens.
   *
   * However, testing with Malayalam shows that old and new spec both allow
   * context.  Testing with Bengali new-spec however shows that it doesn't.
   * So, the heuristic here is the way it is.  It should *only* be changed,
   * as we discover more cases of what Windows does.  DON'T TOUCH OTHERWISE.
   */
  bool zero_context = !indic_plan->is_old_spec && plan->props.script != HB_SCRIPT_MALAYALAM;
  indic_plan->rphf.init (&plan->map, HB_TAG('r','p','h','f'), zero_context);
  indic_plan->pref.init (&plan->map, HB_TAG('p','r','e','f'), zero_context);
  indic_plan->blwf.init (&plan->map, HB_TAG('b','l','w','f'), zero_context);
  indic_plan->pstf.init (&plan->map, HB_TAG('p','s','t','f'), zero_context);
  indic_plan->vatu.init (&plan->map, HB_TAG('v','a','t','u'), zero_context);

  for (unsigned int i = 0; i < ARRAY_LENGTH (indic_plan->mask_array); i++)
    indic_plan->mask_array[i] = (indic_features[i].flags & F_GLOBAL) ?
         0 : plan->map.get_1_mask (indic_features[i].tag);

  return indic_plan;
}

static void
data_destroy_indic (void *data)
{
  hb_free (data);
}

static indic_position_t
consonant_position_from_face (const indic_shape_plan_t *indic_plan,
            const hb_codepoint_t consonant,
            const hb_codepoint_t virama,
            hb_face_t *face,
            hb_buffer_t *buffer)
{
  /* For old-spec, the order of glyphs is Consonant,Virama,
   * whereas for new-spec, it's Virama,Consonant.  However,
   * some broken fonts (like Free Sans) simply copied lookups
   * from old-spec to new-spec without modification.
   * And oddly enough, Uniscribe seems to respect those lookups.
   * Eg. in the sequence U+0924,U+094D,U+0930, Uniscribe finds
   * base at 0.  The font however, only has lookups matching
   * 930,94D in 'blwf', not the expected 94D,930 (with new-spec
   * table).  As such, we simply match both sequences.  Seems
   * to work.
   *
   * Vatu is done as well, for:
   * https://github.com/harfbuzz/harfbuzz/issues/1587
   */
  hb_codepoint_t glyphs[3] = {virama, consonant, virama};
  if (indic_plan->blwf.would_substitute (glyphs  , 2, face, buffer) ||
      indic_plan->blwf.would_substitute (glyphs+1, 2, face, buffer) ||
      indic_plan->vatu.would_substitute (glyphs  , 2, face, buffer) ||
      indic_plan->vatu.would_substitute (glyphs+1, 2, face, buffer))
    return POS_BELOW_C;
  if (indic_plan->pstf.would_substitute (glyphs  , 2, face, buffer) ||
      indic_plan->pstf.would_substitute (glyphs+1, 2, face, buffer))
    return POS_POST_C;
  if (indic_plan->pref.would_substitute (glyphs  , 2, face, buffer) ||
      indic_plan->pref.would_substitute (glyphs+1, 2, face, buffer))
    return POS_POST_C;
  return POS_BASE_C;
}

static void
setup_masks_indic (const hb_ot_shape_plan_t *plan HB_UNUSED,
       hb_buffer_t              *buffer,
       hb_font_t                *font HB_UNUSED)
{
  HB_BUFFER_ALLOCATE_VAR (buffer, indic_category);
  HB_BUFFER_ALLOCATE_VAR (buffer, indic_position);

  /* We cannot setup masks here.  We save information about characters
   * and setup masks later on in a pause-callback. */

  unsigned int count = buffer->len;
  hb_glyph_info_t *info = buffer->info;
  for (unsigned int i = 0; i < count; i++)
    set_indic_properties (info[i]);
}

static bool
setup_syllables_indic (const hb_ot_shape_plan_t *plan HB_UNUSED,
           hb_font_t *font HB_UNUSED,
           hb_buffer_t *buffer)
{
  HB_BUFFER_ALLOCATE_VAR (buffer, syllable);
  find_syllables_indic (buffer);
  foreach_syllable (buffer, start, end)
    buffer->unsafe_to_break (start, end);
  return false;
}

static int
compare_indic_order (const hb_glyph_info_t *pa, const hb_glyph_info_t *pb)
{
  int a = pa->indic_position();
  int b = pb->indic_position();

  return (int) a - (int) b;
}



static void
update_consonant_positions_indic (const hb_ot_shape_plan_t *plan,
          hb_font_t         *font,
          hb_buffer_t       *buffer)
{
  const indic_shape_plan_t *indic_plan = (const indic_shape_plan_t *) plan->data;

  hb_codepoint_t virama;
  if (indic_plan->load_virama_glyph (font, &virama))
  {
    hb_face_t *face = font->face;
    unsigned int count = buffer->len;
    hb_glyph_info_t *info = buffer->info;
    for (unsigned int i = 0; i < count; i++)
      if (info[i].indic_position() == POS_BASE_C)
      {
  hb_codepoint_t consonant = info[i].codepoint;
  info[i].indic_position() = consonant_position_from_face (indic_plan, consonant, virama, face, buffer);
      }
  }
}


/* Rules from:
 * https://docs.microsqoft.com/en-us/typography/script-development/devanagari */

static void
initial_reordering_consonant_syllable (const hb_ot_shape_plan_t *plan,
               hb_face_t *face,
               hb_buffer_t *buffer,
               unsigned int start, unsigned int end)
{
  const indic_shape_plan_t *indic_plan = (const indic_shape_plan_t *) plan->data;
  hb_glyph_info_t *info = buffer->info;

  /* https://github.com/harfbuzz/harfbuzz/issues/435#issuecomment-335560167
   * // For compatibility with legacy usage in Kannada,
   * // Ra+h+ZWJ must behave like Ra+ZWJ+h...
   */
  if (buffer->props.script == HB_SCRIPT_KANNADA &&
      start + 3 <= end &&
      is_one_of (info[start  ], FLAG (I_Cat(Ra))) &&
      is_one_of (info[start+1], FLAG (I_Cat(H))) &&
      is_one_of (info[start+2], FLAG (I_Cat(ZWJ))))
  {
    buffer->merge_clusters (start+1, start+3);
    hb_swap (info[start+1], info[start+2]);
  }

  /* 1. Find base consonant:
   *
   * The shaping engine finds the base consonant of the syllable, using the
   * following algorithm: starting from the end of the syllable, move backwards
   * until a consonant is found that does not have a below-base or post-base
   * form (post-base forms have to follow below-base forms), or that is not a
   * pre-base-reordering Ra, or arrive at the first consonant. The consonant
   * stopped at will be the base.
   *
   *   o If the syllable starts with Ra + Halant (in a script that has Reph)
   *     and has more than one consonant, Ra is excluded from candidates for
   *     base consonants.
   */

  unsigned int base = end;
  bool has_reph = false;

  {
    /* -> If the syllable starts with Ra + Halant (in a script that has Reph)
     *    and has more than one consonant, Ra is excluded from candidates for
     *    base consonants. */
    unsigned int limit = start;
    if (indic_plan->mask_array[INDIC_RPHF] &&
  start + 3 <= end &&
  (
   (indic_plan->config->reph_mode == REPH_MODE_IMPLICIT && !is_joiner (info[start + 2])) ||
   (indic_plan->config->reph_mode == REPH_MODE_EXPLICIT && info[start + 2].indic_category() == I_Cat(ZWJ))
  ))
    {
      /* See if it matches the 'rphf' feature. */
      hb_codepoint_t glyphs[3] = {info[start].codepoint,
          info[start + 1].codepoint,
          indic_plan->config->reph_mode == REPH_MODE_EXPLICIT ?
            info[start + 2].codepoint : 0};
      if (indic_plan->rphf.would_substitute (glyphs, 2, face, buffer) ||
    (indic_plan->config->reph_mode == REPH_MODE_EXPLICIT &&
     indic_plan->rphf.would_substitute (glyphs, 3, face, buffer)))
      {
  limit += 2;
  while (limit < end && is_joiner (info[limit]))
    limit++;
  base = start;
  has_reph = true;
      }
    } else if (indic_plan->config->reph_mode == REPH_MODE_LOG_REPHA && info[start].indic_category() == I_Cat(Repha))
    {
  limit += 1;
  while (limit < end && is_joiner (info[limit]))
    limit++;
  base = start;
  has_reph = true;
    }

    {
      /* -> starting from the end of the syllable, move backwards */
      unsigned int i = end;
      bool seen_below = false;
      do {
  i--;
  /* -> until a consonant is found */
  if (is_consonant (info[i]))
  {
    /* -> that does not have a below-base or post-base form
     * (post-base forms have to follow below-base forms), */
    if (info[i].indic_position() != POS_BELOW_C &&
        (info[i].indic_position() != POS_POST_C || seen_below))
    {
      base = i;
      break;
    }
    if (info[i].indic_position() == POS_BELOW_C)
      seen_below = true;

    /* -> or that is not a pre-base-reordering Ra,
     *
     * IMPLEMENTATION NOTES:
     *
     * Our pre-base-reordering Ra's are marked POS_POST_C, so will be skipped
     * by the logic above already.
     */

    /* -> or arrive at the first consonant. The consonant stopped at will
     * be the base. */
    base = i;
  }
  else
  {
    /* A ZWJ after a Halant stops the base search, and requests an explicit
     * half form.
     * A ZWJ before a Halant, requests a subjoined form instead, and hence
     * search continues.  This is particularly important for Bengali
     * sequence Ra,H,Ya that should form Ya-Phalaa by subjoining Ya. */
    if (start < i &&
        info[i].indic_category() == I_Cat(ZWJ) &&
        info[i - 1].indic_category() == I_Cat(H))
      break;
  }
      } while (i > limit);
    }

    /* -> If the syllable starts with Ra + Halant (in a script that has Reph)
     *    and has more than one consonant, Ra is excluded from candidates for
     *    base consonants.
     *
     *  Only do this for unforced Reph. (ie. not for Ra,H,ZWJ. */
    if (has_reph && base == start && limit - base <= 2) {
      /* Have no other consonant, so Reph is not formed and Ra becomes base. */
      has_reph = false;
    }
  }


  /* 2. Decompose and reorder Matras:
   *
   * Each matra and any syllable modifier sign in the syllable are moved to the
   * appropriate position relative to the consonant(s) in the syllable. The
   * shaping engine decomposes two- or three-part matras into their constituent
   * parts before any repositioning. Matra characters are classified by which
   * consonant in a conjunct they have affinity for and are reordered to the
   * following positions:
   *
   *   o Before first half form in the syllable
   *   o After subjoined consonants
   *   o After post-form consonant
   *   o After main consonant (for above marks)
   *
   * IMPLEMENTATION NOTES:
   *
   * The normalize() routine has already decomposed matras for us, so we don't
   * need to worry about that.
   */


  /* 3.  Reorder marks to canonical order:
   *
   * Adjacent nukta and halant or nukta and vedic sign are always repositioned
   * if necessary, so that the nukta is first.
   *
   * IMPLEMENTATION NOTES:
   *
   * We don't need to do this: the normalize() routine already did this for us.
   */


  /* Reorder characters */

  for (unsigned int i = start; i < base; i++)
    info[i].indic_position() = hb_min (POS_PRE_C, (indic_position_t) info[i].indic_position());

  if (base < end)
    info[base].indic_position() = POS_BASE_C;

  /* Handle beginning Ra */
  if (has_reph)
    info[start].indic_position() = POS_RA_TO_BECOME_REPH;

  /* For old-style Indic script tags, move the first post-base Halant after
   * last consonant.
   *
   * Reports suggest that in some scripts Uniscribe does this only if there
   * is *not* a Halant after last consonant already.  We know that is the
   * case for Kannada, while it reorders unconditionally in other scripts,
   * eg. Malayalam, Bengali, and Devanagari.  We don't currently know about
   * other scripts, so we block Kannada.
   *
   * Kannada test case:
   * U+0C9A,U+0CCD,U+0C9A,U+0CCD
   * With some versions of Lohit Kannada.
   * https://bugs.freedesktop.org/show_bug.cgi?id=59118
   *
   * Malayalam test case:
   * U+0D38,U+0D4D,U+0D31,U+0D4D,U+0D31,U+0D4D
   * With lohit-ttf-20121122/Lohit-Malayalam.ttf
   *
   * Bengali test case:
   * U+0998,U+09CD,U+09AF,U+09CD
   * With Windows XP vrinda.ttf
   * https://github.com/harfbuzz/harfbuzz/issues/1073
   *
   * Devanagari test case:
   * U+091F,U+094D,U+0930,U+094D
   * With chandas.ttf
   * https://github.com/harfbuzz/harfbuzz/issues/1071
   */
  if (indic_plan->is_old_spec)
  {
    bool disallow_double_halants = buffer->props.script == HB_SCRIPT_KANNADA;
    for (unsigned int i = base + 1; i < end; i++)
      if (info[i].indic_category() == I_Cat(H))
      {
  unsigned int j;
  for (j = end - 1; j > i; j--)
    if (is_consonant (info[j]) ||
        (disallow_double_halants && info[j].indic_category() == I_Cat(H)))
      break;
  if (info[j].indic_category() != I_Cat(H) && j > i) {
    /* Move Halant to after last consonant. */
    hb_glyph_info_t t = info[i];
    memmove (&info[i], &info[i + 1], (j - i) * sizeof (info[0]));
    info[j] = t;
  }
  break;
      }
  }

  /* Attach misc marks to previous char to move with them. */
  {
    indic_position_t last_pos = POS_START;
    for (unsigned int i = start; i < end; i++)
    {
      if ((FLAG_UNSAFE (info[i].indic_category()) & (JOINER_FLAGS | FLAG (I_Cat(N)) | FLAG (I_Cat(RS)) | FLAG (I_Cat(CM)) | FLAG (I_Cat(H)))))
      {
  info[i].indic_position() = last_pos;
  if (unlikely (info[i].indic_category() == I_Cat(H) &&
          info[i].indic_position() == POS_PRE_M))
  {
    /*
     * Uniscribe doesn't move the Halant with Left Matra.
     * TEST: U+092B,U+093F,U+094D
     * We follow.
     */
    for (unsigned int j = i; j > start; j--)
      if (info[j - 1].indic_position() != POS_PRE_M) {
        info[i].indic_position() = info[j - 1].indic_position();
        break;
      }
  }
      } else if (info[i].indic_position() != POS_SMVD) {
  if (info[i].indic_category() == I_Cat(MPst) &&
      i > start && info[i - 1].indic_category() == I_Cat(SM))
    info[i - 1].indic_position() = info[i].indic_position();
  last_pos = (indic_position_t) info[i].indic_position();
      }
    }
  }
  /* For post-base consonants let them own anything before them
   * since the last consonant or matra. */
  {
    unsigned int last = base;
    for (unsigned int i = base + 1; i < end; i++)
      if (is_consonant (info[i]))
      {
  for (unsigned int j = last + 1; j < i; j++)
    if (info[j].indic_position() < POS_SMVD)
      info[j].indic_position() = info[i].indic_position();
  last = i;
      } else if (FLAG_UNSAFE (info[i].indic_category()) & (FLAG (I_Cat(M)) | FLAG (I_Cat(MPst))))
  last = i;
  }


  {
    /* Use syllable() for sort accounting temporarily. */
    unsigned int syllable = info[start].syllable();
    for (unsigned int i = start; i < end; i++)
      info[i].syllable() = i - start;

    /* Sit tight, rock 'n roll! */
    hb_stable_sort (info + start, end - start, compare_indic_order);

    /* Find base again; also flip left-matra sequence. */
    unsigned first_left_matra = end;
    unsigned last_left_matra = end;
    base = end;
    for (unsigned int i = start; i < end; i++)
    {
      if (info[i].indic_position() == POS_BASE_C)
      {
  base = i;
  break;
      }
      else if (info[i].indic_position() == POS_PRE_M)
      {
        if (first_left_matra == end)
    first_left_matra = i;
  last_left_matra = i;
      }
    }
    /* https://github.com/harfbuzz/harfbuzz/issues/3863 */
    if (first_left_matra < last_left_matra)
    {
      /* No need to merge clusters, handled later. */
      buffer->reverse_range (first_left_matra, last_left_matra + 1);
      /* Reverse back nuktas, etc. */
      unsigned i = first_left_matra;
      for (unsigned j = i; j <= last_left_matra; j++)
  if (FLAG_UNSAFE (info[j].indic_category()) & (FLAG (I_Cat(M)) | FLAG (I_Cat(MPst))))
  {
    buffer->reverse_range (i, j + 1);
    i = j + 1;
  }
    }

    /* Things are out-of-control for post base positions, they may shuffle
     * around like crazy.  In old-spec mode, we move halants around, so in
     * that case merge all clusters after base.  Otherwise, check the sort
     * order and merge as needed.
     * For pre-base stuff, we handle cluster issues in final reordering.
     *
     * We could use buffer->sort() for this, if there was no special
     * reordering of pre-base stuff happening later...
     * We don't want to merge_clusters all of that, which buffer->sort()
     * would.  Here's a concrete example:
     *
     * Assume there's a pre-base consonant and explicit Halant before base,
     * followed by a prebase-reordering (left) Matra:
     *
     *   C,H,ZWNJ,B,M
     *
     * At this point in reordering we would have:
     *
     *   M,C,H,ZWNJ,B
     *
     * whereas in final reordering we will bring the Matra closer to Base:
     *
     *   C,H,ZWNJ,M,B
     *
     * That's why we don't want to merge-clusters anything before the Base
     * at this point.  But if something moved from after Base to before it,
     * we should merge clusters from base to them.  In final-reordering, we
     * only move things around before base, and merge-clusters up to base.
     * These two merge-clusters from the two sides of base will interlock
     * to merge things correctly.  See:
     * https://github.com/harfbuzz/harfbuzz/issues/2272
     */
    if (indic_plan->is_old_spec || end - start > 127)
      buffer->merge_clusters (base, end);
    else
    {
      /* Note!  syllable() is a one-byte field. */
      for (unsigned int i = base; i < end; i++)
  if (info[i].syllable() != 255)
  {
    unsigned int min = i;
    unsigned int max = i;
    unsigned int j = start + info[i].syllable();
    while (j != i)
    {
      min = hb_min (min, j);
      max = hb_max (max, j);
      unsigned int next = start + info[j].syllable();
      info[j].syllable() = 255; /* So we don't process j later again. */
      j = next;
    }
    buffer->merge_clusters (hb_max (base, min), max + 1);
  }
    }

    /* Put syllable back in. */
    for (unsigned int i = start; i < end; i++)
      info[i].syllable() = syllable;
  }

  /* Setup masks now */

  {
    hb_mask_t mask;

    /* Reph */
    for (unsigned int i = start; i < end && info[i].indic_position() == POS_RA_TO_BECOME_REPH; i++)
      info[i].mask |= indic_plan->mask_array[INDIC_RPHF];

    /* Pre-base */
    mask = indic_plan->mask_array[INDIC_HALF];
    if (!indic_plan->is_old_spec &&
  indic_plan->config->blwf_mode == BLWF_MODE_PRE_AND_POST)
      mask |= indic_plan->mask_array[INDIC_BLWF];
    for (unsigned int i = start; i < base; i++)
      info[i].mask  |= mask;
    /* Base */
    mask = 0;
    if (base < end)
      info[base].mask |= mask;
    /* Post-base */
    mask = indic_plan->mask_array[INDIC_BLWF] |
     indic_plan->mask_array[INDIC_ABVF] |
     indic_plan->mask_array[INDIC_PSTF];
    for (unsigned int i = base + 1; i < end; i++)
      info[i].mask  |= mask;
  }

  if (indic_plan->is_old_spec &&
      buffer->props.script == HB_SCRIPT_DEVANAGARI)
  {
    /* Old-spec eye-lash Ra needs special handling.  From the
     * spec:
     *
     * "The feature 'below-base form' is applied to consonants
     * having below-base forms and following the base consonant.
     * The exception is vattu, which may appear below half forms
     * as well as below the base glyph. The feature 'below-base
     * form' will be applied to all such occurrences of Ra as well."
     *
     * Test case: U+0924,U+094D,U+0930,U+094d,U+0915
     * with Sanskrit 2003 font.
     *
     * However, note that Ra,Halant,ZWJ is the correct way to
     * request eyelash form of Ra, so we wouldbn't inhibit it
     * in that sequence.
     *
     * Test case: U+0924,U+094D,U+0930,U+094d,U+200D,U+0915
     */
    for (unsigned int i = start; i + 1 < base; i++)
      if (info[i  ].indic_category() == I_Cat(Ra) &&
    info[i+1].indic_category() == I_Cat(H)  &&
    (i + 2 == base ||
     info[i+2].indic_category() != I_Cat(ZWJ)))
      {
  info[i  ].mask |= indic_plan->mask_array[INDIC_BLWF];
  info[i+1].mask |= indic_plan->mask_array[INDIC_BLWF];
      }
  }

  unsigned int pref_len = 2;
  if (indic_plan->mask_array[INDIC_PREF] && base + pref_len < end)
  {
    /* Find a Halant,Ra sequence and mark it for pre-base-reordering processing. */
    for (unsigned int i = base + 1; i + pref_len - 1 < end; i++) {
      hb_codepoint_t glyphs[2];
      for (unsigned int j = 0; j < pref_len; j++)
  glyphs[j] = info[i + j].codepoint;
      if (indic_plan->pref.would_substitute (glyphs, pref_len, face, buffer))
      {
  for (unsigned int j = 0; j < pref_len; j++)
    info[i++].mask |= indic_plan->mask_array[INDIC_PREF];
  break;
      }
    }
  }

  /* Apply ZWJ/ZWNJ effects */
  for (unsigned int i = start + 1; i < end; i++)
    if (is_joiner (info[i])) {
      bool non_joiner = info[i].indic_category() == I_Cat(ZWNJ);
      unsigned int j = i;

      do {
  j--;

  /* ZWJ/ZWNJ should disable CJCT.  They do that by simply
   * being there, since we don't skip them for the CJCT
   * feature (ie. F_MANUAL_ZWJ) */

  /* A ZWNJ disables HALF. */
  if (non_joiner)
    info[j].mask &= ~indic_plan->mask_array[INDIC_HALF];

      } while (j > start && !is_consonant (info[j]));
    }
}

static void
initial_reordering_standalone_cluster (const hb_ot_shape_plan_t *plan,
               hb_face_t *face,
               hb_buffer_t *buffer,
               unsigned int start, unsigned int end)
{
  /* We treat placeholder/dotted-circle as if they are consonants, so we
   * should just chain... */

  initial_reordering_consonant_syllable (plan, face, buffer, start, end);
}

static void
initial_reordering_syllable_indic (const hb_ot_shape_plan_t *plan,
           hb_face_t *face,
           hb_buffer_t *buffer,
           unsigned int start, unsigned int end)
{
  indic_syllable_type_t syllable_type = (indic_syllable_type_t) (buffer->info[start].syllable() & 0x0F);
  switch (syllable_type)
  {
    case indic_vowel_syllable: /* We made the vowels look like consonants.  So let's call the consonant logic! */
    case indic_consonant_syllable:
     initial_reordering_consonant_syllable (plan, face, buffer, start, end);
     break;

    case indic_broken_cluster: /* We already inserted dotted-circles, so just call the standalone_cluster. */
    case indic_standalone_cluster:
     initial_reordering_standalone_cluster (plan, face, buffer, start, end);
     break;

    case indic_symbol_cluster:
    case indic_non_indic_cluster:
      break;
  }
}

static bool
initial_reordering_indic (const hb_ot_shape_plan_t *plan,
        hb_font_t *font,
        hb_buffer_t *buffer)
{
  bool ret = false;
  if (!buffer->message (font, "start reordering indic initial"))
    return ret;

  update_consonant_positions_indic (plan, font, buffer);
  if (hb_syllabic_insert_dotted_circles (font, buffer,
           indic_broken_cluster,
           I_Cat(DOTTEDCIRCLE),
           I_Cat(Repha),
           POS_END))
    ret = true;

  foreach_syllable (buffer, start, end)
    initial_reordering_syllable_indic (plan, font->face, buffer, start, end);

  (void) buffer->message (font, "end reordering indic initial");

  return ret;
}

static void
final_reordering_syllable_indic (const hb_ot_shape_plan_t *plan,
         hb_buffer_t *buffer,
         unsigned int start, unsigned int end)
{
  const indic_shape_plan_t *indic_plan = (const indic_shape_plan_t *) plan->data;
  hb_glyph_info_t *info = buffer->info;


  /* This function relies heavily on halant glyphs.  Lots of ligation
   * and possibly multiple substitutions happened prior to this
   * phase, and that might have messed up our properties.  Recover
   * from a particular case of that where we're fairly sure that a
   * class of I_Cat(H) is desired but has been lost. */
  /* We don't call load_virama_glyph(), since we know it's already
   * loaded. */
  hb_codepoint_t virama_glyph = indic_plan->virama_glyph;
  if (virama_glyph)
  {
    for (unsigned int i = start; i < end; i++)
      if (info[i].codepoint == virama_glyph &&
    _hb_glyph_info_ligated (&info[i]) &&
    _hb_glyph_info_multiplied (&info[i]))
      {
  /* This will make sure that this glyph passes is_halant() test. */
  info[i].indic_category() = I_Cat(H);
  _hb_glyph_info_clear_ligated_and_multiplied (&info[i]);
      }
  }


  /* 4. Final reordering:
   *
   * After the localized forms and basic shaping forms GSUB features have been
   * applied (see below), the shaping engine performs some final glyph
   * reordering before applying all the remaining font features to the entire
   * syllable.
   */

  bool try_pref = !!indic_plan->mask_array[INDIC_PREF];

  /* Find base again */
  unsigned int base;
  for (base = start; base < end; base++)
    if (info[base].indic_position() >= POS_BASE_C)
    {
      if (try_pref && base + 1 < end)
      {
  for (unsigned int i = base + 1; i < end; i++)
    if ((info[i].mask & indic_plan->mask_array[INDIC_PREF]) != 0)
    {
      if (!(_hb_glyph_info_substituted (&info[i]) &&
      _hb_glyph_info_ligated_and_didnt_multiply (&info[i])))
      {
        /* Ok, this was a 'pref' candidate but didn't form any.
         * Base is around here... */
        base = i;
        while (base < end && is_halant (info[base]))
    base++;
        if (base < end)
    info[base].indic_position() = POS_BASE_C;

        try_pref = false;
      }
      break;
    }
  if (base == end)
    break;
      }
      /* For Malayalam, skip over unformed below- (but NOT post-) forms. */
      if (buffer->props.script == HB_SCRIPT_MALAYALAM)
      {
  for (unsigned int i = base + 1; i < end; i++)
  {
    while (i < end && is_joiner (info[i]))
      i++;
    if (i == end || !is_halant (info[i]))
      break;
    i++; /* Skip halant. */
    while (i < end && is_joiner (info[i]))
      i++;
    if (i < end && is_consonant (info[i]) && info[i].indic_position() == POS_BELOW_C)
    {
      base = i;
      info[base].indic_position() = POS_BASE_C;
    }
  }
      }

      if (start < base && info[base].indic_position() > POS_BASE_C)
  base--;
      break;
    }
  if (base == end && start < base &&
      is_one_of (info[base - 1], FLAG (I_Cat(ZWJ))))
    base--;
  if (base < end)
    while (start < base &&
     is_one_of (info[base], (FLAG (I_Cat(N)) | FLAG (I_Cat(H)))))
      base--;


  /*   o Reorder matras:
   *
   *     If a pre-base matra character had been reordered before applying basic
   *     features, the glyph can be moved closer to the main consonant based on
   *     whether half-forms had been formed. Actual position for the matra is
   *     defined as “after last standalone halant glyph, after initial matra
   *     position and before the main consonant”. If ZWJ or ZWNJ follow this
   *     halant, position is moved after it.
   *
   * IMPLEMENTATION NOTES:
   *
   * It looks like the last sentence is wrong.  Testing, with Windows 7 Uniscribe
   * and Devanagari shows that the behavior is best described as:
   *
   * "If ZWJ follows this halant, matra is NOT repositioned after this halant.
   *  If ZWNJ follows this halant, position is moved after it."
   *
   * Test case, with Adobe Devanagari or Nirmala UI:
   *
   *   U+091F,U+094D,U+200C,U+092F,U+093F
   *   (Matra moves to the middle, after ZWNJ.)
   *
   *   U+091F,U+094D,U+200D,U+092F,U+093F
   *   (Matra does NOT move, stays to the left.)
   *
   * https://github.com/harfbuzz/harfbuzz/issues/1070
   */

  if (start + 1 < end && start < base) /* Otherwise there can't be any pre-base matra characters. */
  {
    /* If we lost track of base, alas, position before last thingy. */
    unsigned int new_pos = base == end ? base - 2 : base - 1;

    /* Malayalam / Tamil do not have "half" forms or explicit virama forms.
     * The glyphs formed by 'half' are Chillus or ligated explicit viramas.
     * We want to position matra after them.
     */
    if (buffer->props.script != HB_SCRIPT_MALAYALAM && buffer->props.script != HB_SCRIPT_TAMIL)
    {
    search:
      while (new_pos > start &&
       !(is_one_of (info[new_pos], (FLAG (I_Cat(M)) | FLAG (I_Cat(MPst)) | FLAG (I_Cat(H))))))
  new_pos--;

      /* If we found no Halant we are done.
       * Otherwise only proceed if the Halant does
       * not belong to the Matra itself! */
      if (is_halant (info[new_pos]) &&
    info[new_pos].indic_position() != POS_PRE_M)
      {
#if 0 // See comment above
  /* -> If ZWJ or ZWNJ follow this halant, position is moved after it. */
  if (new_pos + 1 < end && is_joiner (info[new_pos + 1]))
    new_pos++;
#endif
  if (new_pos + 1 < end)
  {
    /* -> If ZWJ follows this halant, matra is NOT repositioned after this halant. */
    if (info[new_pos + 1].indic_category() == I_Cat(ZWJ))
    {
      /* Keep searching. */
      if (new_pos > start)
      {
        new_pos--;
        goto search;
      }
    }
    /* -> If ZWNJ follows this halant, position is moved after it.
     *
     * IMPLEMENTATION NOTES:
     *
     * This is taken care of by the state-machine. A Halant,ZWNJ is a terminating
     * sequence for a consonant syllable; any pre-base matras occurring after it
     * will belong to the subsequent syllable.
     */
  }
      }
      else
  new_pos = start; /* No move. */
    }

    if (start < new_pos && info[new_pos].indic_position () != POS_PRE_M)
    {
      /* Now go see if there's actually any matras... */
      for (unsigned int i = new_pos; i > start; i--)
  if (info[i - 1].indic_position () == POS_PRE_M)
  {
    unsigned int old_pos = i - 1;
    if (old_pos < base && base <= new_pos) /* Shouldn't actually happen. */
      base--;

    hb_glyph_info_t tmp = info[old_pos];
    memmove (&info[old_pos], &info[old_pos + 1], (new_pos - old_pos) * sizeof (info[0]));
    info[new_pos] = tmp;

    /* Note: this merge_clusters() is intentionally *after* the reordering.
     * Indic matra reordering is special and tricky... */
    buffer->merge_clusters (new_pos, hb_min (end, base + 1));

    new_pos--;
  }
    } else {
      for (unsigned int i = start; i < base; i++)
  if (info[i].indic_position () == POS_PRE_M) {
    buffer->merge_clusters (i, hb_min (end, base + 1));
    break;
  }
    }
  }


  /*   o Reorder reph:
   *
   *     Reph’s original position is always at the beginning of the syllable,
   *     (i.e. it is not reordered at the character reordering stage). However,
   *     it will be reordered according to the basic-forms shaping results.
   *     Possible positions for reph, depending on the script, are; after main,
   *     before post-base consonant forms, and after post-base consonant forms.
   */

  /* Two cases:
   *
   * - If repha is encoded as a sequence of characters (Ra,H or Ra,H,ZWJ), then
   *   we should only move it if the sequence ligated to the repha form.
   *
   * - If repha is encoded separately and in the logical position, we should only
   *   move it if it did NOT ligate.  If it ligated, it's probably the font trying
   *   to make it work without the reordering.
   */
  if (start + 1 < end &&
      info[start].indic_position() == POS_RA_TO_BECOME_REPH &&
      ((info[start].indic_category() == I_Cat(Repha)) ^
       _hb_glyph_info_ligated_and_didnt_multiply (&info[start])))
  {
    unsigned int new_reph_pos;
    reph_position_t reph_pos = indic_plan->config->reph_pos;

    /*       1. If reph should be positioned after post-base consonant forms,
     *          proceed to step 5.
     */
    if (reph_pos == REPH_POS_AFTER_POST)
    {
      goto reph_step_5;
    }

    /*       2. If the reph repositioning class is not after post-base: target
     *          position is after the first explicit halant glyph between the
     *          first post-reph consonant and last main consonant. If ZWJ or ZWNJ
     *          are following this halant, position is moved after it. If such
     *          position is found, this is the target position. Otherwise,
     *          proceed to the next step.
     *
     *          Note: in old-implementation fonts, where classifications were
     *          fixed in shaping engine, there was no case where reph position
     *          will be found on this step.
     */
    {
      new_reph_pos = start + 1;
      while (new_reph_pos < base && !is_halant (info[new_reph_pos]))
  new_reph_pos++;

      if (new_reph_pos < base && is_halant (info[new_reph_pos]))
      {
  /* ->If ZWJ or ZWNJ are following this halant, position is moved after it. */
  if (new_reph_pos + 1 < base && is_joiner (info[new_reph_pos + 1]))
    new_reph_pos++;
  goto reph_move;
      }
    }

    /*       3. If reph should be repositioned after the main consonant: find the
     *          first consonant not ligated with main, or find the first
     *          consonant that is not a potential pre-base-reordering Ra.
     */
    if (reph_pos == REPH_POS_AFTER_MAIN)
    {
      new_reph_pos = base;
      while (new_reph_pos + 1 < end && info[new_reph_pos + 1].indic_position() <= POS_AFTER_MAIN)
  new_reph_pos++;
      if (new_reph_pos < end)
  goto reph_move;
    }

    /*       4. If reph should be positioned before post-base consonant, find
     *          first post-base classified consonant not ligated with main. If no
     *          consonant is found, the target position should be before the
     *          first matra, syllable modifier sign or vedic sign.
     */
    /* This is our take on what step 4 is trying to say (and failing, BADLY). */
    if (reph_pos == REPH_POS_AFTER_SUB)
    {
      new_reph_pos = base;
      while (new_reph_pos + 1 < end &&
       !( FLAG_UNSAFE (info[new_reph_pos + 1].indic_position()) & (FLAG (POS_POST_C) | FLAG (POS_AFTER_POST) | FLAG (POS_SMVD))))
  new_reph_pos++;
      if (new_reph_pos < end)
  goto reph_move;
    }

    /*       5. If no consonant is found in steps 3 or 4, move reph to a position
     *          immediately before the first post-base matra, syllable modifier
     *          sign or vedic sign that has a reordering class after the intended
     *          reph position. For example, if the reordering position for reph
     *          is post-main, it will skip above-base matras that also have a
     *          post-main position.
     */
    reph_step_5:
    {
      /* Copied from step 2. */
      new_reph_pos = start + 1;
      while (new_reph_pos < base && !is_halant (info[new_reph_pos]))
  new_reph_pos++;

      if (new_reph_pos < base && is_halant (info[new_reph_pos]))
      {
  /* ->If ZWJ or ZWNJ are following this halant, position is moved after it. */
  if (new_reph_pos + 1 < base && is_joiner (info[new_reph_pos + 1]))
    new_reph_pos++;
  goto reph_move;
      }
    }
    /* See https://github.com/harfbuzz/harfbuzz/issues/2298#issuecomment-615318654 */

    /*       6. Otherwise, reorder reph to the end of the syllable.
     */
    {
      new_reph_pos = end - 1;
      while (new_reph_pos > start && info[new_reph_pos].indic_position() == POS_SMVD)
  new_reph_pos--;

      /*
       * If the Reph is to be ending up after a Matra,Halant sequence,
       * position it before that Halant so it can interact with the Matra.
       * However, if it's a plain Consonant,Halant we shouldn't do that.
       * Uniscribe doesn't do this.
       * TEST: U+0930,U+094D,U+0915,U+094B,U+094D
       */
      if (unlikely (is_halant (info[new_reph_pos])))
      {
  for (unsigned int i = base + 1; i < new_reph_pos; i++)
    if (FLAG_UNSAFE (info[i].indic_category()) & (FLAG (I_Cat(M)) | FLAG (I_Cat(MPst))))
    {
      /* Ok, got it. */
      new_reph_pos--;
    }
      }

      goto reph_move;
    }

    reph_move:
    {
      /* Move */
      buffer->merge_clusters (start, new_reph_pos + 1);
      hb_glyph_info_t reph = info[start];
      memmove (&info[start], &info[start + 1], (new_reph_pos - start) * sizeof (info[0]));
      info[new_reph_pos] = reph;

      if (start < base && base <= new_reph_pos)
  base--;
    }
  }


  /*   o Reorder pre-base-reordering consonants:
   *
   *     If a pre-base-reordering consonant is found, reorder it according to
   *     the following rules:
   */

  if (try_pref && base + 1 < end) /* Otherwise there can't be any pre-base-reordering Ra. */
  {
    for (unsigned int i = base + 1; i < end; i++)
      if ((info[i].mask & indic_plan->mask_array[INDIC_PREF]) != 0)
      {
  /*       1. Only reorder a glyph produced by substitution during application
   *          of the <pref> feature. (Note that a font may shape a Ra consonant with
   *          the feature generally but block it in certain contexts.)
   */
  /* Note: We just check that something got substituted.  We don't check that
   * the <pref> feature actually did it...
   *
   * Reorder pref only if it ligated. */
  if (_hb_glyph_info_ligated_and_didnt_multiply (&info[i]))
  {
    /*
     *       2. Try to find a target position the same way as for pre-base matra.
     *          If it is found, reorder pre-base consonant glyph.
     *
     *       3. If position is not found, reorder immediately before main
     *          consonant.
     */

    unsigned int new_pos = base;
    /* Malayalam / Tamil do not have "half" forms or explicit virama forms.
     * The glyphs formed by 'half' are Chillus or ligated explicit viramas.
     * We want to position matra after them.
     */
    if (buffer->props.script != HB_SCRIPT_MALAYALAM && buffer->props.script != HB_SCRIPT_TAMIL)
    {
      while (new_pos > start &&
       !(is_one_of (info[new_pos - 1], FLAG (I_Cat(M)) | FLAG (I_Cat(MPst)) | FLAG (I_Cat(H)))))
        new_pos--;
    }

    if (new_pos > start && is_halant (info[new_pos - 1]))
    {
      /* -> If ZWJ or ZWNJ follow this halant, position is moved after it. */
      if (new_pos < end && is_joiner (info[new_pos]))
        new_pos++;
    }

    {
      unsigned int old_pos = i;

      buffer->merge_clusters (new_pos, old_pos + 1);
      hb_glyph_info_t tmp = info[old_pos];
      memmove (&info[new_pos + 1], &info[new_pos], (old_pos - new_pos) * sizeof (info[0]));
      info[new_pos] = tmp;

      if (new_pos <= base && base < old_pos)
        base++;
    }
  }

  break;
      }
  }


  /* Apply 'init' to the Left Matra if it's a word start. */
  if (info[start].indic_position () == POS_PRE_M)
  {
    if (!start ||
  !(FLAG_UNSAFE (_hb_glyph_info_get_general_category (&info[start - 1])) &
   FLAG_RANGE (HB_UNICODE_GENERAL_CATEGORY_FORMAT, HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK)))
      info[start].mask |= indic_plan->mask_array[INDIC_INIT];
    else
      buffer->unsafe_to_break (start - 1, start + 1);
  }
}


static bool
final_reordering_indic (const hb_ot_shape_plan_t *plan,
      hb_font_t *font HB_UNUSED,
      hb_buffer_t *buffer)
{
  unsigned int count = buffer->len;
  if (unlikely (!count)) return false;

  if (buffer->message (font, "start reordering indic final")) {
    foreach_syllable (buffer, start, end)
      final_reordering_syllable_indic (plan, buffer, start, end);
    (void) buffer->message (font, "end reordering indic final");
  }

  HB_BUFFER_DEALLOCATE_VAR (buffer, indic_category);
  HB_BUFFER_DEALLOCATE_VAR (buffer, indic_position);

  return false;
}


static void
preprocess_text_indic (const hb_ot_shape_plan_t *plan,
           hb_buffer_t              *buffer,
           hb_font_t                *font)
{
  _hb_preprocess_text_vowel_constraints (plan, buffer, font);
}

static bool
decompose_indic (const hb_ot_shape_normalize_context_t *c,
     hb_codepoint_t  ab,
     hb_codepoint_t *a,
     hb_codepoint_t *b)
{
  switch (ab)
  {
    /* Don't decompose these. */
    case 0x0931u  : return false; /* DEVANAGARI LETTER RRA */
    // https://github.com/harfbuzz/harfbuzz/issues/779
    case 0x09DCu  : return false; /* BENGALI LETTER RRA */
    case 0x09DDu  : return false; /* BENGALI LETTER RHA */
    case 0x0B94u  : return false; /* TAMIL LETTER AU */


    /*
     * Decompose split matras that don't have Unicode decompositions.
     */

#if 0
    /* Gujarati */
    /* This one has no decomposition in Unicode, but needs no decomposition either. */
    /* case 0x0AC9u  : return false; */

    /* Oriya */
    case 0x0B57u  : *a = no decomp, -> RIGHT; return true;
#endif
  }

  return (bool) c->unicode->decompose (ab, a, b);
}

static bool
compose_indic (const hb_ot_shape_normalize_context_t *c,
         hb_codepoint_t  a,
         hb_codepoint_t  b,
         hb_codepoint_t *ab)
{
  /* Avoid recomposing split matras. */
  if (HB_UNICODE_GENERAL_CATEGORY_IS_MARK (c->unicode->general_category (a)))
    return false;

  /* Composition-exclusion exceptions that we want to recompose. */
  if (a == 0x09AFu && b == 0x09BCu) { *ab = 0x09DFu; return true; }

  return (bool) c->unicode->compose (a, b, ab);
}


const hb_ot_shaper_t _hb_ot_shaper_indic =
{
  collect_features_indic,
  override_features_indic,
  data_create_indic,
  data_destroy_indic,
  preprocess_text_indic,
  nullptr, /* postprocess_glyphs */
  decompose_indic,
  compose_indic,
  setup_masks_indic,
  nullptr, /* reorder_marks */
  HB_TAG_NONE, /* gpos_tag */
  HB_OT_SHAPE_NORMALIZATION_MODE_COMPOSED_DIACRITICS_NO_SHORT_CIRCUIT,
  HB_OT_SHAPE_ZERO_WIDTH_MARKS_NONE,
  false, /* fallback_position */
};


#endif

Coverage Report

Created: 2026-11-10 07:41