/src/pupnp/upnp/inc/ithread.h

Source
#ifndef ITHREAD_H
#define ITHREAD_H

/*******************************************************************************
 *
 * Copyright (c) 2000-2003 Intel Corporation
 * All rights reserved.
 * Copyright (c) 2012 France Telecom All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * * Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the following disclaimer.
 * * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 * * Neither name of Intel Corporation nor the names of its contributors
 * may be used to endorse or promote products derived from this software
 * without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
 * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 ******************************************************************************/

/*!
 * \file
 */

#if !defined(_WIN32)
  #include <sys/param.h>
#endif

#include "UpnpGlobal.h" /* For UPNP_INLINE, UPNP_EXPORT_SPEC */
#include "UpnpUniStd.h" /* for close() */

#ifdef __cplusplus
extern "C" {
#endif

#include <pthread.h>

#if defined(BSD) && !defined(__GNU__)
  #define PTHREAD_MUTEX_RECURSIVE_NP PTHREAD_MUTEX_RECURSIVE
#endif

#if defined(PTHREAD_MUTEX_RECURSIVE) || defined(__DragonFly__)
  /* This system has SuS2-compliant mutex attributes.
   * E.g. on Cygwin, where we don't have the old nonportable (NP) symbols
   */
  #define ITHREAD_MUTEX_FAST_NP PTHREAD_MUTEX_NORMAL
  #define ITHREAD_MUTEX_RECURSIVE_NP PTHREAD_MUTEX_RECURSIVE
  #define ITHREAD_MUTEX_ERRORCHECK_NP PTHREAD_MUTEX_ERRORCHECK
#else /* PTHREAD_MUTEX_RECURSIVE */
  #define ITHREAD_MUTEX_FAST_NP PTHREAD_MUTEX_FAST_NP
  #define ITHREAD_MUTEX_RECURSIVE_NP PTHREAD_MUTEX_RECURSIVE_NP
  #define ITHREAD_MUTEX_ERRORCHECK_NP PTHREAD_MUTEX_ERRORCHECK_NP
#endif /* PTHREAD_MUTEX_RECURSIVE */

#define ITHREAD_PROCESS_PRIVATE PTHREAD_PROCESS_PRIVATE
#define ITHREAD_PROCESS_SHARED PTHREAD_PROCESS_SHARED

#define ITHREAD_CANCELED PTHREAD_CANCELED

#define ITHREAD_STACK_MIN PTHREAD_STACK_MIN
#define ITHREAD_CREATE_DETACHED PTHREAD_CREATE_DETACHED
#define ITHREAD_CREATE_JOINABLE PTHREAD_CREATE_JOINABLE

/***************************************************************************
 * Name: ithread_t
 *
 *  Description:
 *      Thread handle.
 *      typedef to pthread_t.
 *      Internal Use Only.
 ***************************************************************************/
typedef pthread_t ithread_t;

/****************************************************************************
 * Name: ithread_attr_t
 *
 *  Description:
 *      Thread attribute.
 *      typedef to pthread_attr_t
 *      Internal Use Only
 ***************************************************************************/
typedef pthread_attr_t ithread_attr_t;

/****************************************************************************
 * Name: start_routine
 *
 *  Description:
 *      Thread start routine
 *      Internal Use Only.
 ***************************************************************************/
typedef void (*start_routine)(void *arg);

/****************************************************************************
 * Name: ithread_cond_t
 *
 *  Description:
 *      condition variable.
 *      typedef to pthread_cond_t
 *      Internal Use Only.
 ***************************************************************************/
typedef pthread_cond_t ithread_cond_t;

/****************************************************************************
 * Name: ithread_mutexattr_t
 *
 *  Description:
 *      Mutex attribute.
 *      typedef to pthread_mutexattr_t
 *      Internal Use Only
 ***************************************************************************/
typedef pthread_mutexattr_t ithread_mutexattr_t;

/****************************************************************************
 * Name: ithread_mutex_t
 *
 *  Description:
 *      Mutex.
 *      typedef to pthread_mutex_t
 *      Internal Use Only.
 ***************************************************************************/
typedef pthread_mutex_t ithread_mutex_t;

/****************************************************************************
 * Name: ithread_condattr_t
 *
 *  Description:
 *      Condition attribute.
 *      typedef to pthread_condattr_t
 *      NOT USED
 *      Internal Use Only
 ***************************************************************************/
typedef pthread_condattr_t ithread_condattr_t;

/****************************************************************************
 * Name: ithread_rwlockattr_t
 *
 *  Description:
 *      Mutex attribute.
 *      typedef to pthread_rwlockattr_t
 *      Internal Use Only
 ***************************************************************************/
#if UPNP_USE_RWLOCK
typedef pthread_rwlockattr_t ithread_rwlockattr_t;
#endif /* UPNP_USE_RWLOCK */

/****************************************************************************
 * Name: ithread_rwlock_t
 *
 *  Description:
 *      Condition attribute.
 *      typedef to pthread_rwlock_t
 *      Internal Use Only
 ***************************************************************************/
/* UPNP_USE_RWLOCK is defined in autoconfig.h, pulled in by config.h.
 * Include config.h now if the caller has not done so: without it
 * UPNP_USE_RWLOCK is 0 and ithread_rwlock_t silently becomes
 * pthread_mutex_t, which causes a deadlock when used in place of the
 * pthread_rwlock_t that upnpapi.c uses for GlobalHndRWLock. */
#ifndef INTERNAL_CONFIG_H
  #include "config.h" /* IWYU pragma: keep */
#endif
#if UPNP_USE_RWLOCK
typedef pthread_rwlock_t ithread_rwlock_t;
#else
/* Read-write locks aren't available on this platform: use mutex instead. */
typedef ithread_mutex_t ithread_rwlock_t;
#endif /* UPNP_USE_RWLOCK */

/****************************************************************************
 * Function: ithread_initialize_library
 *
 *  Description:
 *      Initializes the library. Does nothing in all implementations, except
 *      when statically linked for WIN32.
 *  Parameters:
 *      none.
 *  Returns:
 *      0 on success, Nonzero on failure.
 ***************************************************************************/
static UPNP_INLINE int ithread_initialize_library(void)
{
  int ret = 0;

  return ret;
}

/****************************************************************************
 * Function: ithread_cleanup_library
 *
 *  Description:
 *      Clean up library resources. Does nothing in all implementations, except
 *      when statically linked for WIN32.
 *  Parameters:
 *      none.
 *  Returns:
 *      0 on success, Nonzero on failure.
 ***************************************************************************/
static UPNP_INLINE int ithread_cleanup_library(void)
{
  int ret = 0;

  return ret;
}

/****************************************************************************
 * Function: ithread_initialize_thread
 *
 *  Description:
 *      Initializes the thread. Does nothing in all implementations, except
 *      when statically linked for WIN32.
 *  Parameters:
 *      none.
 *  Returns:
 *      0 on success, Nonzero on failure.
 ***************************************************************************/
static UPNP_INLINE int ithread_initialize_thread(void)
{
  int ret = 0;

#if defined(_WIN32) && defined(PTW32_STATIC_LIB)
  ret = !pthread_win32_thread_attach_np();
#endif

  return ret;
}

/****************************************************************************
 * Function: ithread_cleanup_thread
 *
 *  Description:
 *      Clean up thread resources. Does nothing in all implementations, except
 *      when statically linked for WIN32.
 *  Parameters:
 *      none.
 *  Returns:
 *      0 on success, Nonzero on failure.
 ***************************************************************************/
static UPNP_INLINE int ithread_cleanup_thread(void)
{
  int ret = 0;

#if defined(_WIN32) && defined(PTW32_STATIC_LIB)
  ret = !pthread_win32_thread_detach_np();
#endif

  return ret;
}

/****************************************************************************
 * Function: ithread_mutexattr_init
 *
 *  Description:
 *      Initializes a mutex attribute variable.
 *      Used to set the type of the mutex.
 *  Parameters:
 *      ithread_mutexattr_init * attr (must be valid non NULL pointer to
 *                                     pthread_mutexattr_t)
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_mutexattr_init
 ***************************************************************************/
#define ithread_mutexattr_init pthread_mutexattr_init

/****************************************************************************
 * Function: ithread_mutexattr_destroy
 *
 *  Description:
 *      Releases any resources held by the mutex attribute.
 *      Currently there are no resources associated with the attribute
 *  Parameters:
 *      ithread_mutexattr_t * attr (must be valid non NULL pointer to
 *                                  pthread_mutexattr_t)
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_mutexattr_destroy
 ***************************************************************************/
#define ithread_mutexattr_destroy pthread_mutexattr_destroy

/****************************************************************************
 * Function: ithread_mutexattr_setkind_np
 *
 *  Description:
 *      Sets the mutex type in the attribute.
 *      Valid types are: ITHREAD_MUTEX_FAST_NP
 *                       ITHREAD_MUTEX_RECURSIVE_NP
 *                       ITHREAD_MUTEX_ERRORCHECK_NP
 *
 *  Parameters:
 *      ithread_mutexattr_t * attr (must be valid non NULL pointer to
 *                                   ithread_mutexattr_t)
 *      int kind (one of ITHREAD_MUTEX_FAST_NP or ITHREAD_MUTEX_RECURSIVE_NP
 *                or ITHREAD_MUTEX_ERRORCHECK_NP)
 *  Returns:
 *      0 on success. Nonzero on failure.
 *      Returns EINVAL if the kind is not supported.
 *      See man page for pthread_mutexattr_setkind_np
 *****************************************************************************/
#define ithread_mutexattr_setkind_np pthread_mutexattr_settype
#define ithread_mutexattr_settype pthread_mutexattr_settype

/****************************************************************************
 * Function: ithread_mutexattr_getkind_np
 *
 *  Description:
 *      Gets the mutex type in the attribute.
 *      Valid types are: ITHREAD_MUTEX_FAST_NP
 *                       ITHREAD_MUTEX_RECURSIVE_NP
 *                       ITHREAD_MUTEX_ERRORCHECK_NP
 *
 *  Parameters:
 *      ithread_mutexattr_t * attr (must be valid non NULL pointer to
 *                                   pthread_mutexattr_t)
 *      int *kind (one of ITHREAD_MUTEX_FAST_NP or ITHREAD_MUTEX_RECURSIVE_NP
 *                or ITHREAD_MUTEX_ERRORCHECK_NP)
 *  Returns:
 *      0 on success. Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_mutexattr_getkind_np
 *****************************************************************************/
#define ithread_mutexattr_getkind_np pthread_mutexattr_gettype
#define ithread_mutexattr_gettype pthread_mutexattr_gettype

/****************************************************************************
 * Function: ithread_mutex_init
 *
 *  Description:
 *      Initializes mutex.
 *      Must be called before use.
 *
 *  Parameters:
 *      ithread_mutex_t *mutex (must be valid non NULL pointer to
 *              pthread_mutex_t)
 *      const ithread_mutexattr_t *mutex_attr
 *
 * Returns:
 *      0 on success,
 *      Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_mutex_init
 *****************************************************************************/
#define ithread_mutex_init pthread_mutex_init

/****************************************************************************
 * Function: ithread_mutex_lock
 *
 * Description:
 *      Locks mutex.
 *
 * Parameters:
 *      ithread_mutex_t * mutex (must be valid non NULL pointer to
 *              pthread_mutex_t). The mutex must be initialized.
 *
 * Returns:
 *      0 on success, Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_mutex_lock
 *****************************************************************************/
#define ithread_mutex_lock pthread_mutex_lock

/****************************************************************************
 * Function: ithread_mutex_unlock
 *
 *  Description:
 *      Unlocks mutex.
 *
 *  Parameters:
 *      ithread_mutex_t * mutex (must be valid non NULL pointer to
 *              pthread_mutex_t). The mutex must be initialized.
 *
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_mutex_unlock
 *****************************************************************************/
#define ithread_mutex_unlock pthread_mutex_unlock

/****************************************************************************
 * Function: ithread_mutex_destroy
 *
 *  Description:
 *      Releases any resources held by the mutex.
 *  Mutex can no longer be used after this call.
 *  Mutex is only destroyed when there are no longer any threads
 *      waiting on it. Mutex cannot be destroyed if it is locked.
 * Parameters:
 *      ithread_mutex_t * mutex (must be valid non NULL pointer to
 *              pthread_mutex_t). The mutex must be initialized.
 * Returns:
 *      0 on success.
 *      Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_mutex_destroy
 *****************************************************************************/
#define ithread_mutex_destroy pthread_mutex_destroy

/****************************************************************************
 * Function: ithread_rwlockattr_init
 *
 *  Description:
 *      Initializes a rwlock attribute variable to default values.
 *  Parameters:
 *      const ithread_rwlockattr_init *attr (must be valid non NULL pointer to
 *                                           pthread_rwlockattr_t)
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_rwlockattr_init
 ***************************************************************************/
#if UPNP_USE_RWLOCK
  #define ithread_rwlockattr_init pthread_rwlockattr_init
#endif /* UPNP_USE_RWLOCK */

/****************************************************************************
 * Function: ithread_rwlockattr_destroy
 *
 *  Description:
 *      Releases any resources held by the rwlock attribute.
 *  Parameters:
 *      ithread_rwlockattr_t *attr (must be valid non NULL pointer to
 *                                  pthread_rwlockattr_t)
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_rwlockattr_destroy
 ***************************************************************************/
#if UPNP_USE_RWLOCK
  #define ithread_rwlockattr_destroy pthread_rwlockattr_destroy
#endif /* UPNP_USE_RWLOCK */

/****************************************************************************
 * Function: ithread_rwlockatttr_setpshared
 *
 *  Description:
 *      Sets the rwlock type in the attribute.
 *      Valid types are: ITHREAD_PROCESS_PRIVATE
 *                       ITHREAD_PROCESS_SHARED
 *
 *  Parameters:
 *      ithread_rwlockattr_t * attr (must be valid non NULL pointer to
 *                                   ithread_rwlockattr_t)
 *      int kind (one of ITHREAD_PROCESS_PRIVATE or ITHREAD_PROCESS_SHARED)
 *
 *  Returns:
 *      0 on success. Nonzero on failure.
 *      Returns EINVAL if the kind is not supported.
 *      See man page for pthread_rwlockattr_setkind_np
 *****************************************************************************/
#if UPNP_USE_RWLOCK
  #define ithread_rwlockatttr_setpshared pthread_rwlockatttr_setpshared
#endif /* UPNP_USE_RWLOCK */

/****************************************************************************
 * Function: ithread_rwlockatttr_getpshared
 *
 *  Description:
 *      Gets the rwlock type in the attribute.
 *      Valid types are: ITHREAD_PROCESS_PRIVATE
 *                       ITHREAD_PROCESS_SHARED
 *
 *  Parameters:
 *      ithread_rwlockattr_t * attr (must be valid non NULL pointer to
 *                                   pthread_rwlockattr_t)
 *      int *kind (one of ITHREAD_PROCESS_PRIVATE or ITHREAD_PROCESS_SHARED)
 *
 *  Returns:
 *      0 on success. Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_rwlockatttr_getpshared
 *****************************************************************************/
#if UPNP_USE_RWLOCK
  #define ithread_rwlockatttr_getpshared pthread_rwlockatttr_getpshared
#endif /* UPNP_USE_RWLOCK */

/****************************************************************************
 * Function: ithread_rwlock_init
 *
 * Description:
 *      Initializes rwlock.
 *      Must be called before use.
 *
 * Parameters:
 *      ithread_rwlock_t *rwlock (must be valid non NULL pointer to
 *              pthread_rwlock_t) const ithread_rwlockattr_t *rwlock_attr
 *
 * Returns:
 *      0 on success
 *      Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_rwlock_init
 *****************************************************************************/
#if UPNP_USE_RWLOCK
  #define ithread_rwlock_init pthread_rwlock_init
#else
  /* Read-write locks aren't available: use mutex instead. */
  #define ithread_rwlock_init ithread_mutex_init
#endif

/****************************************************************************
 * Function: ithread_rwlock_rdlock
 *
 *  Description:
 *      Locks rwlock for reading.
 *  Parameters:
 *      ithread_rwlock_t *rwlock (must be valid non NULL pointer to
 *              pthread_rwlock_t). The rwlock must be initialized.
 *
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_rwlock_rdlock
 *****************************************************************************/
#if UPNP_USE_RWLOCK
  #define ithread_rwlock_rdlock pthread_rwlock_rdlock
#else
  /* Read-write locks aren't available: use mutex instead. */
  #define ithread_rwlock_rdlock ithread_mutex_lock
#endif /* UPNP_USE_RWLOCK */

/****************************************************************************
 * Function: ithread_rwlock_wrlock
 *
 *  Description:
 *      Locks rwlock for writting.
 *  Parameters:
 *      ithread_rwlock_t *rwlock (must be valid non NULL pointer to
 *              pthread_rwlock_t) rwlock must be initialized.
 *
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_rwlock_wrlock
 *****************************************************************************/
#if UPNP_USE_RWLOCK
  #define ithread_rwlock_wrlock pthread_rwlock_wrlock
#else
  /* Read-write locks aren't available: use mutex instead. */
  #define ithread_rwlock_wrlock ithread_mutex_lock
#endif /* UPNP_USE_RWLOCK */

/****************************************************************************
 * Function: ithread_rwlock_unlock
 *
 *  Description:
 *      Unlocks rwlock.
 *
 *  Parameters:
 *      ithread_rwlock_t *rwlock (must be valid non NULL pointer to
 *              pthread_rwlock_t) rwlock must be initialized.
 *
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_rwlock_unlock
 *****************************************************************************/
#if UPNP_USE_RWLOCK
  #define ithread_rwlock_unlock pthread_rwlock_unlock
#else
  /* Read-write locks aren't available: use mutex instead. */
  #define ithread_rwlock_unlock ithread_mutex_unlock
#endif /* UPNP_USE_RWLOCK */

/****************************************************************************
 * Function: ithread_rwlock_destroy
 *
 *  Description:
 *      Releases any resources held by the rwlock.
 *  rwlock can no longer be used after this call.
 *  rwlock is only destroyed when there are no longer any threads
 *      waiting on it. rwlock cannot be destroyed if it is locked.
 *
 * Parameters:
 *      ithread_rwlock_t *rwlock (must be valid non NULL pointer to
 *              pthread_rwlock_t) rwlock must be initialized.
 *
 * Returns:
 *      0 on success.
 *      Nonzero on failure.
 *      Always returns 0.
 *      See man page for pthread_rwlock_destroy
 *****************************************************************************/
#if UPNP_USE_RWLOCK
  #define ithread_rwlock_destroy pthread_rwlock_destroy
#else
  /* Read-write locks aren't available: use mutex instead. */
  #define ithread_rwlock_destroy ithread_mutex_destroy
#endif /* UPNP_USE_RWLOCK */

/****************************************************************************
 * Function: ithread_cond_init
 *
 *  Description:
 *      Initializes condition variable.
 *      Must be called before use.
 *  Parameters:
 *      ithread_cond_t *cond (must be valid non NULL pointer to pthread_cond_t)
 *      const ithread_condattr_t *cond_attr (ignored)
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      See man page for pthread_cond_init
 *****************************************************************************/
#define ithread_cond_init pthread_cond_init

/****************************************************************************
 * Function: ithread_cond_signal
 *
 *  Description:
 *      Wakes up exactly one thread waiting on condition.
 *      Associated mutex MUST be locked by thread before entering this call.
 *  Parameters:
 *      ithread_cond_t *cond (must be valid non NULL pointer to
 *      ithread_cond_t)
 *      cond must be initialized
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      See man page for pthread_cond_signal
 *****************************************************************************/
#define ithread_cond_signal pthread_cond_signal

/****************************************************************************
 * Function: ithread_cond_broadcast
 *
 *  Description:
 *      Wakes up all threads waiting on condition.
 *      Associated mutex MUST be locked by thread before entering this call.
 *  Parameters:
 *      ithread_cond_t *cond (must be valid non NULL pointer to
 *      ithread_cond_t)
 *      cond must be initialized
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      See man page for pthread_cond_broadcast
 *****************************************************************************/
#define ithread_cond_broadcast pthread_cond_broadcast

/****************************************************************************
 * Function: ithread_cond_wait
 *
 *  Description:
 *      Atomically releases mutex and waits on condition.
 *      Associated mutex MUST be locked by thread before entering this call.
 *      Mutex is reacquired when call returns.
 *  Parameters:
 *      ithread_cond_t *cond (must be valid non NULL pointer to
 *      ithread_cond_t)
 *      cond must be initialized
 *      ithread_mutex_t *mutex (must be valid non NULL pointer to
 *      ithread_mutex_t)
 *      Mutex must be locked.
 *  Returns:
 *      0 on success, Nonzero on failure.
 *      See man page for pthread_cond_wait
 *****************************************************************************/
#define ithread_cond_wait pthread_cond_wait

/****************************************************************************
 * Function: pthread_cond_timedwait
 *
 * Description:
 *  Atomically releases the associated mutex and waits on the condition.
 *  If the condition is not signaled in the specified time than the call
 *      times out and returns. Associated mutex MUST be locked by thread before
 *      entering this call. Mutex is reacquired when call returns.
 * Parameters:
 *      ithread_cond_t *cond (must be valid non NULL pointer to ithread_cond_t)
 *              cond must be initialized
 *      ithread_mutex_t *mutex (must be valid non NULL pointer to
 *              ithread_mutex_t) Mutex must be locked.
 *      const struct timespec *abstime(absolute time, measured from Jan 1, 1970)
 * Returns:
 *      0 on success.
 *      ETIMEDOUT on timeout.
 *      Nonzero on failure.
 *      See man page for pthread_cond_timedwait
 ***************************************************************************/

#define ithread_cond_timedwait pthread_cond_timedwait

/****************************************************************************
 * Function: ithread_cond_destroy
 *
 *  Description:
 *      Releases any resources held by the condition variable.
 *    Condition variable can no longer be used after this call.
 *  Parameters:
 *      ithread_cond_t *cond (must be valid non NULL pointer to
 *      ithread_cond_t)
 *      cond must be initialized.
 *  Returns:
 *      0 on success. Nonzero on failure.
 *      See man page for pthread_cond_destroy
 ***************************************************************************/
#define ithread_cond_destroy pthread_cond_destroy

/****************************************************************************
 * Function: ithread_attr_init
 *
 *  Description:
 *      Initialises thread attribute object.
 *  Parameters:
 *      ithread_attr_t *attr (must be valid non NULL pointer to
 *      ithread_attr_t)
 *  Returns:
 *      0 on success. Nonzero on failure.
 *      See man page for pthread_attr_init
 ***************************************************************************/
#define ithread_attr_init pthread_attr_init

/****************************************************************************
 * Function: ithread_attr_destroy
 *
 *  Description:
 *      Destroys thread attribute object.
 *  Parameters:
 *      ithread_attr_t *attr (must be valid non NULL pointer to
 *      ithread_attr_t)
 *  Returns:
 *      0 on success. Nonzero on failure.
 *      See man page for pthread_attr_destroy
 ***************************************************************************/
#define ithread_attr_destroy pthread_attr_destroy

/****************************************************************************
 * Function: ithread_attr_setstacksize
 *
 *  Description:
 *      Sets stack size of a thread attribute object.
 *  Parameters:
 *      ithread_attr_t *attr (must be valid non NULL pointer to
 *      ithread_attr_t)
 *      size_t stacksize (value of stacksize must be greater than
 *      ITHREAD_STACK_MIN and lower than system-imposed limits
 *  Returns:
 *      0 on success. Nonzero on failure.
 *      See man page for pthread_attr_setstacksize
 ***************************************************************************/
#define ithread_attr_setstacksize pthread_attr_setstacksize

/****************************************************************************
 * Function: ithread_attr_setdetachstate
 *
 *  Description:
 *      Sets detach state of a thread attribute object.
 *  Parameters:
 *      ithread_attr_t *attr (must be valid non NULL pointer to
 *      ithread_attr_t)
 *      int detachstate (value of detachstate must be ITHREAD_CREATE_DETACHED
 *      or ITHREAD_CREATE_JOINABLE)
 *  Returns:
 *      0 on success. Nonzero on failure.
 *      See man page for pthread_attr_setdetachstate
 ***************************************************************************/
#define ithread_attr_setdetachstate pthread_attr_setdetachstate

/****************************************************************************
 * Function: ithread_create
 *
 *  Description:
 *    Creates a thread with the given start routine
 *      and argument.
 *  Parameters:
 *      ithread_t * thread (must be valid non NULL pointer to pthread_t)
 *      ithread_attr_t *attr
 *      void * (start_routine) (void *arg) (start routine)
 *      void * arg - argument.
 *  Returns:
 *      0 on success. Nonzero on failure.
 *      Returns EAGAIN if a new thread can not be created.
 *      Returns EINVAL if there is a problem with the arguments.
 *      See man page fore pthread_create
 ***************************************************************************/
#define ithread_create pthread_create

/****************************************************************************
 * Function: ithread_cancel
 *
 *  Description:
 *    Cancels a thread.
 *  Parameters:
 *      ithread_t * thread (must be valid non NULL pointer to ithread_t)
 *  Returns:
 *      0 on success. Nonzero on failure.
 *      See man page for pthread_cancel
 ***************************************************************************/
#define ithread_cancel pthread_cancel

/****************************************************************************
 * Function: ithread_exit
 *
 *  Description:
 *    Returns a return code from a thread.
 *      Implicitly called when the start routine returns.
 *  Parameters:
 *      void  * return_code return code to return
 *      See man page for pthread_exit
 ***************************************************************************/
#define ithread_exit pthread_exit

/****************************************************************************
 * Function: ithread_get_current_thread_id
 *
 *  Description:
 *    Returns the handle of the currently running thread.
 *  Returns:
 *    The handle of the currently running thread.
 *              See man page for pthread_self
 ***************************************************************************/
#define ithread_get_current_thread_id pthread_self

/****************************************************************************
 * Function: ithread_self
 *
 *  Description:
 *    Returns the handle of the currently running thread.
 *  Returns:
 *    The handle of the currently running thread.
 *              See man page for pthread_self
 ***************************************************************************/
#define ithread_self pthread_self

/****************************************************************************
 * Function: ithread_detach
 *
 *  Description:
 *    Makes a thread's resources reclaimed immediately
 *            after it finishes
 *            execution.
 *  Returns:
 *    0 on success, Nonzero on failure.
 *      See man page for pthread_detach
 ***************************************************************************/
#define ithread_detach pthread_detach

/****************************************************************************
 * Function: ithread_join
 *
 *  Description:
 *    Suspends the currently running thread until the
 * specified thread
 *      has finished.
 *      Returns the return code of the thread, or ITHREAD_CANCELED
 *      if the thread has been canceled.
 *  Parameters:
 *      ithread_t *thread (valid non null thread identifier)
 *      void ** return (space for return code)
 *  Returns:
 *    0 on success, Nonzero on failure.
 *     See man page for pthread_join
 ***************************************************************************/
#define ithread_join pthread_join

/****************************************************************************
 * Function: isleep
 *
 *  Description:
 *    Suspends the currently running thread for the specified number
 *      of seconds
 *      Always returns 0.
 *  Parameters:
 *      unsigned int seconds - number of seconds to sleep.
 *  Returns:
 *    0 on success, Nonzero on failure.
 *              See man page for sleep (man 3 sleep)
 *****************************************************************************/
#ifdef _WIN32
  #define isleep(x) Sleep((x) * 1000)
#else
  #define isleep sleep
#endif

/****************************************************************************
 * Function: isleep
 *
 *  Description:
 *    Suspends the currently running thread for the specified number
 *      of milliseconds
 *      Always returns 0.
 *  Parameters:
 *      unsigned int milliseconds - number of milliseconds to sleep.
 *  Returns:
 *    0 on success, Nonzero on failure.
 *              See man page for sleep (man 3 sleep)
 *****************************************************************************/
#ifdef _WIN32
  #define imillisleep Sleep
#else
  #if _POSIX_C_SOURCE < 200809L
    #define imillisleep(x) usleep(1000 * x)
  #else
    #define imillisleep(x) \
      do { \
        const struct timespec req = { \
          0, x * 1000 * 1000}; \
        nanosleep(&req, NULL); \
      } while (0)
  #endif
#endif

#if !defined(PTHREAD_MUTEX_RECURSIVE) && !defined(__DragonFly__) && \
  !defined(UPNP_USE_MSVCPP)
/* !defined(UPNP_USE_MSVCPP) should probably also have pthreads version check -
 * but it's not clear if that is possible */
/* NK: Added for satisfying the gcc compiler */
UPNP_EXPORT_SPEC int pthread_mutexattr_setkind_np(
  pthread_mutexattr_t *attr, int kind);
#endif

#ifdef __cplusplus
}
#endif

#endif /* ITHREAD_H */

Coverage Report

Created: 2026-08-14 06:19