/src/spirv-cross/spirv_parser.cpp

Source
/*
 * Copyright 2018-2021 Arm Limited
 * SPDX-License-Identifier: Apache-2.0 OR MIT
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * At your option, you may choose to accept this material under either:
 *  1. The Apache License, Version 2.0, found at <http://www.apache.org/licenses/LICENSE-2.0>, or
 *  2. The MIT License, found at <http://opensource.org/licenses/MIT>.
 */

#include "spirv_parser.hpp"
#include "spirv_common.hpp"
#include "NonSemanticShaderDebugInfo100.h"
#include <assert.h>

using namespace std;
using namespace SPIRV_CROSS_SPV_HEADER_NAMESPACE;

namespace SPIRV_CROSS_NAMESPACE
{
Parser::Parser(vector<uint32_t> spirv)
{
  ir.spirv = std::move(spirv);
}

Parser::Parser(const uint32_t *spirv_data, size_t word_count)
{
  ir.spirv = vector<uint32_t>(spirv_data, spirv_data + word_count);
}

static bool decoration_is_string(Decoration decoration)
{
  switch (decoration)
  {
  case DecorationUserSemantic:
    return true;

  default:
    return false;
  }
}

static inline uint32_t swap_endian(uint32_t v)
{
  return ((v >> 24) & 0x000000ffu) | ((v >> 8) & 0x0000ff00u) | ((v << 8) & 0x00ff0000u) | ((v << 24) & 0xff000000u);
}

static bool is_valid_spirv_version(uint32_t version)
{
  switch (version)
  {
  // Allow v99 since it tends to just work.
  case 99:
  case 0x10000: // SPIR-V 1.0
  case 0x10100: // SPIR-V 1.1
  case 0x10200: // SPIR-V 1.2
  case 0x10300: // SPIR-V 1.3
  case 0x10400: // SPIR-V 1.4
  case 0x10500: // SPIR-V 1.5
  case 0x10600: // SPIR-V 1.6
    return true;

  default:
    return false;
  }
}

void Parser::parse()
{
  auto &spirv = ir.spirv;

  auto len = spirv.size();
  if (len < 5)
    SPIRV_CROSS_THROW("SPIRV file too small.");

  auto s = spirv.data();

  // Endian-swap if we need to.
  if (s[0] == swap_endian(MagicNumber))
    transform(begin(spirv), end(spirv), begin(spirv), [](uint32_t c) { return swap_endian(c); });

  if (s[0] != MagicNumber || !is_valid_spirv_version(s[1]))
    SPIRV_CROSS_THROW("Invalid SPIRV format.");

  uint32_t bound = s[3];

  const uint32_t MaximumNumberOfIDs = 0x3fffff;
  if (bound > MaximumNumberOfIDs)
    SPIRV_CROSS_THROW("ID bound exceeds limit of 0x3fffff.\n");

  ir.set_id_bounds(bound);

  uint32_t offset = 5;

  SmallVector<Instruction> instructions;
  while (offset < len)
  {
    Instruction instr = {};
    instr.op = spirv[offset] & 0xffff;
    instr.count = (spirv[offset] >> 16) & 0xffff;

    if (instr.count == 0)
      SPIRV_CROSS_THROW("SPIR-V instructions cannot consume 0 words. Invalid SPIR-V file.");

    instr.offset = offset + 1;
    instr.length = instr.count - 1;

    offset += instr.count;

    if (offset > spirv.size())
      SPIRV_CROSS_THROW("SPIR-V instruction goes out of bounds.");

    instructions.push_back(instr);
  }

  for (auto &i : instructions)
    parse(i);

  for (auto &fixup : forward_pointer_fixups)
  {
    auto &target = get<SPIRType>(fixup.first);
    auto &source = get<SPIRType>(fixup.second);
    target.member_types = source.member_types;
    target.basetype = source.basetype;
    target.self = source.self;
  }
  forward_pointer_fixups.clear();

  for (auto &source : ir.sources)
  {
    auto cmp = [](const ParsedIR::Source::Marker &a, const ParsedIR::Source::Marker &b) {
      return a.line < b.line;
    };

    std::sort(source.line_markers.begin(), source.line_markers.end(), cmp);
  }

  if (current_function)
    SPIRV_CROSS_THROW("Function was not terminated.");
  if (current_block)
    SPIRV_CROSS_THROW("Block was not terminated.");

  // Now that all definitions are bound to a kind, we can filter the library
  // exports and populate the exported functions.
  for (uint32_t id : ir.library_exports)
  {
    if (ir.ids[id].get_type() == TypeFunction)
      ir.library_exported_functions.push_back(id);
  }

  if (ir.default_entry_point == 0)
  {
    if (ir.library_exported_functions.empty())
      SPIRV_CROSS_THROW("There is no entry point in the SPIR-V module.");

    // No OpEntryPoint, but the module exports functions. Treat as a library
    // module: designate the first exported function as the default entry
    // point so analyses keyed on default_entry_point can run.
    ir.is_library_module = true;
    ir.default_entry_point = ir.library_exported_functions.front();
    auto &name = ir.get_name(ir.default_entry_point);
    ir.entry_points.insert(std::make_pair(ir.default_entry_point,
                                          SPIREntryPoint(ir.default_entry_point, ExecutionModelGLCompute, name)));
  }
}

const uint32_t *Parser::stream(const Instruction &instr) const
{
  // If we're not going to use any arguments, just return nullptr.
  // We want to avoid case where we return an out of range pointer
  // that trips debug assertions on some platforms.
  if (!instr.length)
    return nullptr;

  if (instr.offset + instr.length > ir.spirv.size())
    SPIRV_CROSS_THROW("Compiler::stream() out of range.");
  return &ir.spirv[instr.offset];
}

static string extract_string(const std::vector<uint32_t> &spirv, uint32_t offset)
{
  return extract_string(spirv.data() + offset, spirv.size() - offset);
}

void Parser::parse(const Instruction &instruction)
{
  auto *ops = stream(instruction);
  auto op = static_cast<Op>(instruction.op);
  uint32_t length = instruction.length;

  // HACK for glslang that might emit OpEmitMeshTasksEXT followed by return / branch.
  // Instead of failing hard, just ignore it.
  if (ignore_trailing_block_opcodes)
  {
    ignore_trailing_block_opcodes = false;
    if (op == OpReturn || op == OpBranch || op == OpUnreachable)
      return;
  }

  switch (op)
  {
  case OpSourceExtension:
  case OpNop:
  case OpModuleProcessed:
    break;

  case OpString:
  {
    set<SPIRString>(ops[0], extract_string(ir.spirv, instruction.offset + 1));
    break;
  }

  case OpMemoryModel:
    ir.addressing_model = static_cast<AddressingModel>(ops[0]);
    ir.memory_model = static_cast<MemoryModel>(ops[1]);
    break;

  case OpSource:
  {
    ir.sources.emplace_back();
    auto &source = ir.sources.back();
    source.lang = static_cast<SourceLanguage>(ops[0]);

    switch (source.lang)
    {
    case SourceLanguageESSL:
      source.es = true;
      source.version = ops[1];
      source.known = true;
      source.hlsl = false;
      break;

    case SourceLanguageGLSL:
      source.es = false;
      source.version = ops[1];
      source.known = true;
      source.hlsl = false;
      break;

    case SourceLanguageHLSL:
      // For purposes of cross-compiling, this is GLSL 450.
      source.es = false;
      source.version = 450;
      source.known = true;
      source.hlsl = true;
      break;

    default:
      source.known = false;
      break;
    }

    if (length >= 3)
      source.file_id = ops[2];

    if (length >= 4)
      source.source = extract_string(ir.spirv, instruction.offset + 3);

    break;
  }

  case OpSourceContinued:
    if (!ir.sources.empty())
      ir.sources.back().source += extract_string(ir.spirv, instruction.offset);
    break;

  case OpUndef:
  {
    uint32_t result_type = ops[0];
    uint32_t id = ops[1];
    set<SPIRUndef>(id, result_type);
    if (current_block)
      current_block->ops.push_back(instruction);
    break;
  }

  case OpCapability:
  {
    uint32_t cap = ops[0];
    if (cap == CapabilityKernel)
      SPIRV_CROSS_THROW("Kernel capability not supported.");

    ir.declared_capabilities.push_back(static_cast<Capability>(ops[0]));
    break;
  }

  case OpExtension:
  {
    auto ext = extract_string(ir.spirv, instruction.offset);
    ir.declared_extensions.push_back(std::move(ext));
    break;
  }

  case OpExtInstImport:
  {
    uint32_t id = ops[0];

    SPIRExtension::Extension spirv_ext = SPIRExtension::Unsupported;

    auto ext = extract_string(ir.spirv, instruction.offset + 1);
    if (ext == "GLSL.std.450")
      spirv_ext = SPIRExtension::GLSL;
    else if (ext == "DebugInfo")
      spirv_ext = SPIRExtension::SPV_debug_info;
    else if (ext == "SPV_AMD_shader_ballot")
      spirv_ext = SPIRExtension::SPV_AMD_shader_ballot;
    else if (ext == "SPV_AMD_shader_explicit_vertex_parameter")
      spirv_ext = SPIRExtension::SPV_AMD_shader_explicit_vertex_parameter;
    else if (ext == "SPV_AMD_shader_trinary_minmax")
      spirv_ext = SPIRExtension::SPV_AMD_shader_trinary_minmax;
    else if (ext == "SPV_AMD_gcn_shader")
      spirv_ext = SPIRExtension::SPV_AMD_gcn_shader;
    else if (ext == "NonSemantic.DebugPrintf")
      spirv_ext = SPIRExtension::NonSemanticDebugPrintf;
    else if (ext.find("NonSemantic.Shader.DebugInfo.") == 0)
      spirv_ext = SPIRExtension::NonSemanticShaderDebugInfo;
    else if (ext.find("NonSemantic.") == 0)
      spirv_ext = SPIRExtension::NonSemanticGeneric;

    set<SPIRExtension>(id, spirv_ext);
    // Other SPIR-V extensions which have ExtInstrs are currently not supported.

    break;
  }

  case OpExtInst:
  case OpExtInstWithForwardRefsKHR:
  {
    // The SPIR-V debug information extended instructions might come at global scope.
    if (current_block)
    {
      current_block->ops.push_back(instruction);
      if (length >= 2)
      {
        const auto *type = maybe_get<SPIRType>(ops[0]);
        if (type)
          ir.load_type_width.insert({ ops[1], type->width });
      }
    }

    if (op == OpExtInst && length > 4)
    {
      // Don't want to deal with ForwardRefs here.
      auto &ext = get<SPIRExtension>(ops[2]);
      if (ext.ext == SPIRExtension::NonSemanticShaderDebugInfo)
      {
        const auto instr = ops[3];
        if (instr == NonSemanticShaderDebugInfo100DebugSource)
        {
          set<SPIRString>(ops[1], get<SPIRString>(ops[4]).str);

          ir.sources.emplace_back();
          auto &source = ir.sources.back();
          source.file_id = ops[4];
          source.define_id = ops[1];
          if (length >= 6)
            source.source = ir.get<SPIRString>(ops[5]).str;
        }
        else if (instr == NonSemanticShaderDebugInfo100DebugSourceContinued)
        {
          if (length < 5)
            SPIRV_CROSS_THROW("Invalid arguments for ShaderDebugInfo100DebugSourceContinued");
          if (!ir.sources.empty())
            ir.sources.back().source += ir.get<SPIRString>(ops[4]).str;
        }
        else if (instr == NonSemanticShaderDebugInfo100DebugLine)
        {
          if (length < 9)
            SPIRV_CROSS_THROW("Invalid arguments for ShaderDebugInfo100DebugLine");
          auto source_id = ops[4];
          auto line_start = ir.get<SPIRConstant>(ops[5]).scalar_i32();
          auto col_start = ir.get<SPIRConstant>(ops[7]).scalar_i32();

          for (auto &source : ir.sources)
          {
            if (source.define_id != source_id)
              continue;

            source.line_markers.emplace_back();
            auto &marker = source.line_markers.back();
            marker.line = line_start;
            marker.col = col_start;
            marker.offset = instruction.offset - 1;
            marker.function_id = current_function ? current_function->self : ID(0);
            marker.block_id = current_block ? current_block->self : ID(0);
            break;
          }
        }
        else if (instr == NonSemanticShaderDebugInfo100DebugLocalVariable)
        {
          if (length < 11)
            SPIRV_CROSS_THROW("Invalid arguments for ShaderDebugInfo100DebugLocalVariable");
          auto &lvar = set<SPIRDebugLocalVariable>(ops[1]);
          lvar.name_id = ops[4];
        }
        else if (instr == NonSemanticShaderDebugInfo100DebugDeclare)
        {
          if (length < 7)
            SPIRV_CROSS_THROW("Invalid arguments for ShaderDebugInfo100DebugDeclare");
          auto &lvar = get<SPIRDebugLocalVariable>(ops[4]);
          auto &var = get<SPIRVariable>(ops[5]);
          var.debug_local_variables.push_back(lvar.self);
        }
      }
    }
    break;
  }

  case OpEntryPoint:
  {
    auto itr =
        ir.entry_points.insert(make_pair(ops[1], SPIREntryPoint(ops[1], static_cast<ExecutionModel>(ops[0]),
                                                                extract_string(ir.spirv, instruction.offset + 2))));
    auto &e = itr.first->second;

    // Strings need nul-terminator and consume the whole word.
    uint32_t strlen_words = uint32_t((e.name.size() + 1 + 3) >> 2);

    for (uint32_t i = strlen_words + 2; i < instruction.length; i++)
      e.interface_variables.push_back(ops[i]);

    // Set the name of the entry point in case OpName is not provided later.
    ir.set_name(ops[1], e.name);

    // If we don't have an entry, make the first one our "default".
    if (!ir.default_entry_point)
      ir.default_entry_point = ops[1];
    break;
  }

  case OpExecutionMode:
  {
    auto &execution = ir.entry_points[ops[0]];
    auto mode = static_cast<ExecutionMode>(ops[1]);
    execution.flags.set(mode);

    switch (mode)
    {
    case ExecutionModeInvocations:
      execution.invocations = ops[2];
      break;

    case ExecutionModeLocalSize:
      execution.workgroup_size.x = ops[2];
      execution.workgroup_size.y = ops[3];
      execution.workgroup_size.z = ops[4];
      break;

    case ExecutionModeOutputVertices:
      execution.output_vertices = ops[2];
      break;

    case ExecutionModeOutputPrimitivesEXT:
      execution.output_primitives = ops[2];
      break;

    case ExecutionModeSignedZeroInfNanPreserve:
      switch (ops[2])
      {
      case 8:
        execution.signed_zero_inf_nan_preserve_8 = true;
        break;

      case 16:
        execution.signed_zero_inf_nan_preserve_16 = true;
        break;

      case 32:
        execution.signed_zero_inf_nan_preserve_32 = true;
        break;

      case 64:
        execution.signed_zero_inf_nan_preserve_64 = true;
        break;

      default:
        SPIRV_CROSS_THROW("Invalid bit-width for SignedZeroInfNanPreserve.");
      }
      break;

    default:
      break;
    }
    break;
  }

  case OpExecutionModeId:
  {
    auto &execution = ir.entry_points[ops[0]];
    auto mode = static_cast<ExecutionMode>(ops[1]);
    execution.flags.set(mode);

    switch (mode)
    {
    case ExecutionModeLocalSizeId:
      execution.workgroup_size.id_x = ops[2];
      execution.workgroup_size.id_y = ops[3];
      execution.workgroup_size.id_z = ops[4];
      break;

    case ExecutionModeFPFastMathDefault:
      execution.fp_fast_math_defaults[ops[2]] = ops[3];
      break;

    default:
      break;
    }
    break;
  }

  case OpName:
  {
    uint32_t id = ops[0];
    ir.set_name(id, extract_string(ir.spirv, instruction.offset + 1));
    break;
  }

  case OpMemberName:
  {
    uint32_t id = ops[0];
    uint32_t member = ops[1];
    ir.set_member_name(id, member, extract_string(ir.spirv, instruction.offset + 2));
    break;
  }

  case OpDecorationGroup:
  {
    // Noop, this simply means an ID should be a collector of decorations.
    // The meta array is already a flat array of decorations which will contain the relevant decorations.
    break;
  }

  case OpGroupDecorate:
  {
    uint32_t group_id = ops[0];
    auto &decorations = ir.meta[group_id].decoration;
    auto &flags = decorations.decoration_flags;

    // Copies decorations from one ID to another. Only copy decorations which are set in the group,
    // i.e., we cannot just copy the meta structure directly.
    for (uint32_t i = 1; i < length; i++)
    {
      uint32_t target = ops[i];
      flags.for_each_bit([&](uint32_t bit) {
        auto decoration = static_cast<Decoration>(bit);

        if (decoration_is_string(decoration))
        {
          ir.set_decoration_string(target, decoration, ir.get_decoration_string(group_id, decoration));
        }
        else
        {
          ir.meta[target].decoration_word_offset[decoration] =
              ir.meta[group_id].decoration_word_offset[decoration];
          ir.set_decoration(target, decoration, ir.get_decoration(group_id, decoration));
        }
      });
    }
    break;
  }

  case OpGroupMemberDecorate:
  {
    uint32_t group_id = ops[0];
    auto &flags = ir.meta[group_id].decoration.decoration_flags;

    // Copies decorations from one ID to another. Only copy decorations which are set in the group,
    // i.e., we cannot just copy the meta structure directly.
    for (uint32_t i = 1; i + 1 < length; i += 2)
    {
      uint32_t target = ops[i + 0];
      uint32_t index = ops[i + 1];
      flags.for_each_bit([&](uint32_t bit) {
        auto decoration = static_cast<Decoration>(bit);

        if (decoration_is_string(decoration))
          ir.set_member_decoration_string(target, index, decoration,
                                          ir.get_decoration_string(group_id, decoration));
        else
          ir.set_member_decoration(target, index, decoration, ir.get_decoration(group_id, decoration));
      });
    }
    break;
  }

  case OpDecorate:
  case OpDecorateId:
  {
    // OpDecorateId technically supports an array of arguments, but our only supported decorations are single uint,
    // so merge decorate and decorate-id here.
    uint32_t id = ops[0];

    auto decoration = static_cast<Decoration>(ops[1]);
    if (length >= 3)
    {
      ir.meta[id].decoration_word_offset[decoration] = uint32_t(&ops[2] - ir.spirv.data());
      ir.set_decoration(id, decoration, ops[2]);
    }
    else
      ir.set_decoration(id, decoration);

    // Track exported functions so we can compile library modules that have no OpEntryPoint.
    // LinkageAttributes layout: literal-string (variable words) followed by LinkageType.
    if (decoration == DecorationLinkageAttributes && length >= 4 &&
        static_cast<LinkageType>(ops[length - 1]) == LinkageTypeExport)
    {
      ir.library_exports.push_back(id);

      // If OpName was stripped (e.g. by spirv-opt --strip-debug), fall back
      // to the linkage name so the emitted function keeps its export name.
      if (ir.get_name(id).empty())
        ir.set_name(id, extract_string(ir.spirv, instruction.offset + 2));
    }

    break;
  }

  case OpDecorateStringGOOGLE:
  {
    uint32_t id = ops[0];
    auto decoration = static_cast<Decoration>(ops[1]);
    ir.set_decoration_string(id, decoration, extract_string(ir.spirv, instruction.offset + 2));
    break;
  }

  case OpMemberDecorate:
  case OpMemberDecorateIdEXT:
  {
    uint32_t id = ops[0];
    uint32_t member = ops[1];
    auto decoration = static_cast<Decoration>(ops[2]);
    if (length >= 4)
      ir.set_member_decoration(id, member, decoration, ops[3]);
    else
      ir.set_member_decoration(id, member, decoration);
    break;
  }

  case OpMemberDecorateStringGOOGLE:
  {
    uint32_t id = ops[0];
    uint32_t member = ops[1];
    auto decoration = static_cast<Decoration>(ops[2]);
    ir.set_member_decoration_string(id, member, decoration, extract_string(ir.spirv, instruction.offset + 3));
    break;
  }

  // Build up basic types.
  case OpTypeVoid:
  {
    uint32_t id = ops[0];
    auto &type = set<SPIRType>(id, op);
    type.basetype = SPIRType::Void;
    break;
  }

  case OpTypeBool:
  {
    uint32_t id = ops[0];
    auto &type = set<SPIRType>(id, op);
    type.basetype = SPIRType::Boolean;
    type.width = 1;
    break;
  }

  case OpTypeFloat:
  {
    uint32_t id = ops[0];
    uint32_t width = ops[1];
    auto &type = set<SPIRType>(id, op);

    if (width != 16 && width != 8 && length > 2)
      SPIRV_CROSS_THROW("Unrecognized FP encoding mode for OpTypeFloat.");

    if (width == 64)
      type.basetype = SPIRType::Double;
    else if (width == 32)
      type.basetype = SPIRType::Float;
    else if (width == 16)
    {
      if (length > 2)
      {
        if (ops[2] == FPEncodingBFloat16KHR)
          type.basetype = SPIRType::BFloat16;
        else
          SPIRV_CROSS_THROW("Unrecognized encoding for OpTypeFloat 16.");
      }
      else
        type.basetype = SPIRType::Half;
    }
    else if (width == 8)
    {
      if (length < 3)
        SPIRV_CROSS_THROW("Missing encoding for OpTypeFloat 8.");
      else if (ops[2] == FPEncodingFloat8E4M3EXT)
        type.basetype = SPIRType::FloatE4M3;
      else if (ops[2] == FPEncodingFloat8E5M2EXT)
        type.basetype = SPIRType::FloatE5M2;
      else
        SPIRV_CROSS_THROW("Invalid encoding for OpTypeFloat 8.");
    }
    else
      SPIRV_CROSS_THROW("Unrecognized bit-width of floating point type.");
    type.width = width;
    break;
  }

  case OpTypeInt:
  {
    uint32_t id = ops[0];
    uint32_t width = ops[1];
    bool signedness = ops[2] != 0;
    auto &type = set<SPIRType>(id, op);
    type.basetype = signedness ? to_signed_basetype(width) : to_unsigned_basetype(width);
    type.width = width;
    break;
  }

  // Build composite types by "inheriting".
  // NOTE: The self member is also copied! For pointers and array modifiers this is a good thing
  // since we can refer to decorations on pointee classes which is needed for UBO/SSBO, I/O blocks in geometry/tess etc.
  case OpTypeVector:
  {
    uint32_t id = ops[0];
    uint32_t vecsize = ops[2];

    auto &base = get<SPIRType>(ops[1]);
    auto &vecbase = set<SPIRType>(id, base);

    vecbase.op = op;
    vecbase.vecsize = vecsize;
    vecbase.self = id;
    vecbase.parent_type = ops[1];
    break;
  }

  case OpTypeMatrix:
  {
    uint32_t id = ops[0];
    uint32_t colcount = ops[2];

    auto &base = get<SPIRType>(ops[1]);
    auto &matrixbase = set<SPIRType>(id, base);

    matrixbase.op = op;
    matrixbase.columns = colcount;
    matrixbase.self = id;
    matrixbase.parent_type = ops[1];
    break;
  }

  case OpTypeCooperativeMatrixKHR:
  {
    uint32_t id = ops[0];
    auto &base = get<SPIRType>(ops[1]);
    auto &matrixbase = set<SPIRType>(id, base);

    matrixbase.op = op;
    matrixbase.ext.cooperative.scope_id = ops[2];
    matrixbase.ext.cooperative.rows_id = ops[3];
    matrixbase.ext.cooperative.columns_id = ops[4];
    matrixbase.ext.cooperative.use_id = ops[5];
    matrixbase.self = id;
    matrixbase.parent_type = ops[1];
    break;
  }

  case OpTypeCooperativeVectorNV:
  {
    uint32_t id = ops[0];
    auto &type = set<SPIRType>(id, op);

    type.basetype = SPIRType::CoopVecNV;
    type.op = op;
    type.ext.coopVecNV.component_type_id = ops[1];
    type.ext.coopVecNV.component_count_id = ops[2];
    type.parent_type = ops[1];

    // CoopVec-Nv can be used with integer operations like SMax where
    // where spirv-opt does explicit checks on integer bitwidth
    auto component_type = get<SPIRType>(type.ext.coopVecNV.component_type_id);
    type.width = component_type.width;
    break;
  }

  case OpTypeArray:
  {
    uint32_t id = ops[0];
    uint32_t tid = ops[1];
    auto &base = get<SPIRType>(tid);
    auto &arraybase = set<SPIRType>(id, base);

    arraybase.op = op;
    arraybase.parent_type = tid;

    uint32_t cid = ops[2];
    ir.mark_used_as_array_length(cid);
    auto *c = maybe_get<SPIRConstant>(cid);
    bool literal = c && !c->specialization;

    // We're copying type information into Array types, so we'll need a fixup for any physical pointer
    // references.
    if (base.forward_pointer)
      forward_pointer_fixups.push_back({ id, tid });

    arraybase.array_size_literal.push_back(literal);
    arraybase.array.push_back(literal ? c->scalar() : cid);

    // .self resolves down to non-array/non-pointer type.
    arraybase.self = base.self;
    break;
  }

  case OpTypeRuntimeArray:
  {
    uint32_t id = ops[0];

    auto &base = get<SPIRType>(ops[1]);
    auto &arraybase = set<SPIRType>(id, base);

    // We're copying type information into Array types, so we'll need a fixup for any physical pointer
    // references.
    if (base.forward_pointer)
      forward_pointer_fixups.push_back({ id, ops[1] });

    arraybase.op = op;
    arraybase.array.push_back(0);
    arraybase.array_size_literal.push_back(true);
    arraybase.parent_type = ops[1];

    // .self resolves down to non-array/non-pointer type.
    arraybase.self = base.self;
    break;
  }

  case OpTypeImage:
  {
    uint32_t id = ops[0];
    auto &type = set<SPIRType>(id, op);
    type.basetype = SPIRType::Image;
    type.image.type = ops[1];
    type.image.dim = static_cast<Dim>(ops[2]);
    type.image.depth = ops[3] == 1;
    type.image.arrayed = ops[4] != 0;
    type.image.ms = ops[5] != 0;
    type.image.sampled = ops[6];
    type.image.format = static_cast<ImageFormat>(ops[7]);
    type.image.access = (length >= 9) ? static_cast<AccessQualifier>(ops[8]) : AccessQualifierMax;
    break;
  }

  case OpTypeSampledImage:
  {
    uint32_t id = ops[0];
    uint32_t imagetype = ops[1];
    auto &type = set<SPIRType>(id, op);
    type = get<SPIRType>(imagetype);
    type.basetype = SPIRType::SampledImage;
    type.self = id;
    break;
  }

  case OpTypeSampler:
  {
    uint32_t id = ops[0];
    auto &type = set<SPIRType>(id, op);
    type.basetype = SPIRType::Sampler;
    break;
  }

  case OpTypeUntypedPointerKHR:
  case OpTypePointer:
  {
    uint32_t id = ops[0];

    // Very rarely, we might receive a FunctionPrototype here.
    // We won't be able to compile it, but we shouldn't crash when parsing.
    // We should be able to reflect.
    auto *base = op == OpTypePointer ? maybe_get<SPIRType>(ops[2]) : nullptr;
    auto &ptrbase = set<SPIRType>(id, op);

    if (base)
    {
      ptrbase = *base;
      ptrbase.op = op;
    }

    ptrbase.pointer = true;
    ptrbase.pointer_depth++;
    ptrbase.storage = static_cast<StorageClass>(ops[1]);

    if (ptrbase.storage == StorageClassAtomicCounter)
      ptrbase.basetype = SPIRType::AtomicCounter;

    if (base && base->forward_pointer)
      forward_pointer_fixups.push_back({ id, ops[2] });

    if (op == OpTypePointer)
      ptrbase.parent_type = ops[2];
    else
      ptrbase.basetype = SPIRType::Void;

    // Do NOT set ptrbase.self!
    break;
  }

  case OpTypeForwardPointer:
  {
    uint32_t id = ops[0];
    auto &ptrbase = set<SPIRType>(id, op);
    ptrbase.pointer = true;
    ptrbase.pointer_depth++;
    ptrbase.storage = static_cast<StorageClass>(ops[1]);
    ptrbase.forward_pointer = true;

    if (ptrbase.storage == StorageClassAtomicCounter)
      ptrbase.basetype = SPIRType::AtomicCounter;

    break;
  }

  case OpTypeStruct:
  {
    uint32_t id = ops[0];
    auto &type = set<SPIRType>(id, op);
    type.basetype = SPIRType::Struct;
    for (uint32_t i = 1; i < length; i++)
      type.member_types.push_back(ops[i]);

    // Check if we have seen this struct type before, with just different
    // decorations.
    //
    // Add workaround for issue #17 as well by looking at OpName for the struct
    // types, which we shouldn't normally do.
    // We should not normally have to consider type aliases like this to begin with
    // however ... glslang issues #304, #307 cover this.

    // For stripped names, never consider struct type aliasing.
    // We risk declaring the same struct multiple times, but type-punning is not allowed
    // so this is safe.
    bool consider_aliasing = !ir.get_name(type.self).empty();
    if (consider_aliasing)
    {
      for (auto &other : global_struct_cache)
      {
        if (ir.get_name(type.self) == ir.get_name(other) &&
            types_are_logically_equivalent(type, get<SPIRType>(other)))
        {
          type.type_alias = other;
          break;
        }
      }

      if (type.type_alias == TypeID(0))
        global_struct_cache.push_back(id);
    }
    break;
  }

  case OpTypeFunction:
  {
    uint32_t id = ops[0];
    uint32_t ret = ops[1];

    auto &func = set<SPIRFunctionPrototype>(id, ret);
    for (uint32_t i = 2; i < length; i++)
      func.parameter_types.push_back(ops[i]);
    break;
  }

  case OpTypeAccelerationStructureKHR:
  {
    uint32_t id = ops[0];
    auto &type = set<SPIRType>(id, op);
    type.basetype = SPIRType::AccelerationStructure;
    break;
  }

  case OpTypeRayQueryKHR:
  {
    uint32_t id = ops[0];
    auto &type = set<SPIRType>(id, op);
    type.basetype = SPIRType::RayQuery;
    break;
  }

  case OpTypeTensorARM:
  {
    uint32_t id = ops[0];
    auto &type = set<SPIRType>(id, op);
    type.basetype = SPIRType::Tensor;
    type.ext.tensor = {};
    type.ext.tensor.type = ops[1];
    if (length >= 3)
      type.ext.tensor.rank = ops[2];
    if (length >= 4)
      type.ext.tensor.shape = ops[3];
    break;
  }

  // Variable declaration
  // All variables are essentially pointers with a storage qualifier.
  case OpVariable:
  {
    uint32_t type = ops[0];
    uint32_t id = ops[1];
    auto storage = static_cast<StorageClass>(ops[2]);
    uint32_t initializer = length == 4 ? ops[3] : 0;

    if (storage == StorageClassFunction)
    {
      if (!current_function)
        SPIRV_CROSS_THROW("No function currently in scope");
      current_function->add_local_variable(id);
    }

    set<SPIRVariable>(id, type, storage, initializer);
    break;
  }

  case OpUntypedVariableKHR:
  {
    uint32_t type = ops[0];
    uint32_t id = ops[1];
    auto storage = static_cast<StorageClass>(ops[2]);
    uint32_t data_type = length >= 4 ? ops[3] : 0;
    uint32_t initializer = length >= 5 ? ops[4] : 0;

    if (storage == StorageClassFunction)
    {
      if (!current_function)
        SPIRV_CROSS_THROW("No function currently in scope");
      current_function->add_local_variable(id);
    }

    auto &v = set<SPIRVariable>(id, type, storage, initializer);
    v.untyped = true;
    v.untyped_alloca_type = data_type;
    break;
  }

  // OpPhi
  // OpPhi is a fairly magical opcode.
  // It selects temporary variables based on which parent block we *came from*.
  // In high-level languages we can "de-SSA" by creating a function local, and flush out temporaries to this function-local
  // variable to emulate SSA Phi.
  case OpPhi:
  {
    if (!current_function)
      SPIRV_CROSS_THROW("No function currently in scope");
    if (!current_block)
      SPIRV_CROSS_THROW("No block currently in scope");

    uint32_t result_type = ops[0];
    uint32_t id = ops[1];

    // Instead of a temporary, create a new function-wide temporary with this ID instead.
    auto &var = set<SPIRVariable>(id, result_type, StorageClassFunction);
    var.phi_variable = true;

    current_function->add_local_variable(id);

    for (uint32_t i = 2; i + 2 <= length; i += 2)
      current_block->phi_variables.push_back({ ops[i], ops[i + 1], id });
    break;
  }

  // Constants
  case OpSpecConstant:
  case OpConstant:
  case OpConstantCompositeReplicateEXT:
  case OpSpecConstantCompositeReplicateEXT:
  {
    uint32_t id = ops[1];
    auto &type = get<SPIRType>(ops[0]);
    if (op == OpConstantCompositeReplicateEXT || op == OpSpecConstantCompositeReplicateEXT)
    {
      auto subconstant = uint32_t(ops[2]);
      set<SPIRConstant>(id, ops[0], &subconstant, 1, op == OpSpecConstantCompositeReplicateEXT, true);
    }
    else
    {

      if (type.width > 32)
        set<SPIRConstant>(id, ops[0], ops[2] | (uint64_t(ops[3]) << 32), op == OpSpecConstant);
      else
        set<SPIRConstant>(id, ops[0], ops[2], op == OpSpecConstant);
    }
    break;
  }

  case OpSpecConstantFalse:
  case OpConstantFalse:
  {
    uint32_t id = ops[1];
    set<SPIRConstant>(id, ops[0], uint32_t(0), op == OpSpecConstantFalse);
    break;
  }

  case OpSpecConstantTrue:
  case OpConstantTrue:
  {
    uint32_t id = ops[1];
    set<SPIRConstant>(id, ops[0], uint32_t(1), op == OpSpecConstantTrue);
    break;
  }

  case OpConstantNull:
  {
    uint32_t id = ops[1];
    uint32_t type = ops[0];
    ir.make_constant_null(id, type, true);
    break;
  }

  case OpSpecConstantComposite:
  case OpConstantComposite:
  {
    uint32_t id = ops[1];
    uint32_t type = ops[0];

    auto &ctype = get<SPIRType>(type);
    uint32_t elements = length - 2;

    // We can have constants which are structs and arrays.
    // In this case, our SPIRConstant will be a list of other SPIRConstant ids which we
    // can refer to.
    if (ctype.basetype == SPIRType::Struct || !ctype.array.empty() || elements > 4)
    {
      set<SPIRConstant>(id, type, ops + 2, length - 2, op == OpSpecConstantComposite);
    }
    else
    {
      SPIRConstant remapped_constant_ops[4];
      const SPIRConstant *c[4];
      for (uint32_t i = 0; i < elements; i++)
      {
        // Specialization constants operations can also be part of this.
        // We do not know their value, so any attempt to query SPIRConstant later
        // will fail. We can only propagate the ID of the expression and use to_expression on it.
        auto *constant_op = maybe_get<SPIRConstantOp>(ops[2 + i]);
        auto *undef_op = maybe_get<SPIRUndef>(ops[2 + i]);
        if (constant_op)
        {
          if (op == OpConstantComposite)
            SPIRV_CROSS_THROW("Specialization constant operation used in OpConstantComposite.");

          remapped_constant_ops[i].make_null(get<SPIRType>(constant_op->basetype));
          remapped_constant_ops[i].self = constant_op->self;
          remapped_constant_ops[i].constant_type = constant_op->basetype;
          remapped_constant_ops[i].specialization = true;
          c[i] = &remapped_constant_ops[i];
        }
        else if (undef_op)
        {
          // Undefined, just pick 0.
          remapped_constant_ops[i].make_null(get<SPIRType>(undef_op->basetype));
          remapped_constant_ops[i].constant_type = undef_op->basetype;
          c[i] = &remapped_constant_ops[i];
        }
        else
          c[i] = &get<SPIRConstant>(ops[2 + i]);
      }
      set<SPIRConstant>(id, type, c, elements, op == OpSpecConstantComposite);
    }
    break;
  }

  case OpConstantSizeOfEXT:
  {
    uint32_t id = ops[1];
    uint32_t type = ops[0];
    auto &c = set<SPIRConstant>(id, type);
    c.size_of_type = ops[2];
    break;
  }

  case OpConstantDataKHR:
  case OpSpecConstantDataKHR:
  {
    uint32_t id = ops[1];
    uint32_t type = ops[0];
    set<SPIRConstantData>(id, type, ops + 2, length - 2, op == OpSpecConstantDataKHR);
    break;
  }

  case OpTypeBufferEXT:
  {
    uint32_t type = ops[0];
    auto &t = set<SPIRType>(type, OpTypeBufferEXT);
    t.basetype = SPIRType::DescriptorHeapBuffer;
    t.ext.descriptor_heap_buffer.storage = static_cast<StorageClass>(ops[1]);
    break;
  }

  // Functions
  case OpFunction:
  {
    uint32_t res = ops[0];
    uint32_t id = ops[1];
    uint32_t control = ops[2];
    uint32_t type = ops[3];

    if (current_function)
      SPIRV_CROSS_THROW("Must end a function before starting a new one!");

    current_function = &set<SPIRFunction>(id, res, control, type);
    break;
  }

  case OpFunctionParameter:
  {
    uint32_t type = ops[0];
    uint32_t id = ops[1];

    if (!current_function)
      SPIRV_CROSS_THROW("Must be in a function!");

    current_function->add_parameter(type, id);
    set<SPIRVariable>(id, type, StorageClassFunction);
    break;
  }

  case OpFunctionEnd:
  {
    if (current_block)
    {
      // Very specific error message, but seems to come up quite often.
      SPIRV_CROSS_THROW(
          "Cannot end a function before ending the current block.\n"
          "Likely cause: If this SPIR-V was created from glslang HLSL, make sure the entry point is valid.");
    }
    current_function = nullptr;
    break;
  }

  // Blocks
  case OpLabel:
  {
    // OpLabel always starts a block.
    if (!current_function)
      SPIRV_CROSS_THROW("Blocks cannot exist outside functions!");

    uint32_t id = ops[0];

    current_function->blocks.push_back(id);
    if (!current_function->entry_block)
      current_function->entry_block = id;

    if (current_block)
      SPIRV_CROSS_THROW("Cannot start a block before ending the current block.");

    current_block = &set<SPIRBlock>(id);
    break;
  }

  // Branch instructions end blocks.
  case OpBranch:
  {
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to end a non-existing block.");

    uint32_t target = ops[0];
    current_block->terminator = SPIRBlock::Direct;
    current_block->next_block = target;
    current_block = nullptr;
    break;
  }

  case OpBranchConditional:
  {
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to end a non-existing block.");

    current_block->condition = ops[0];
    current_block->true_block = ops[1];
    current_block->false_block = ops[2];

    current_block->terminator = SPIRBlock::Select;

    if (current_block->true_block == current_block->false_block)
    {
      // Bogus conditional, translate to a direct branch.
      // Avoids some ugly edge cases later when analyzing CFGs.

      // There are some super jank cases where the merge block is different from the true/false,
      // and later branches can "break" out of the selection construct this way.
      // This is complete nonsense, but CTS hits this case.
      // In this scenario, we should see the selection construct as more of a Switch with one default case.
      // The problem here is that this breaks any attempt to break out of outer switch statements,
      // but it's theoretically solvable if this ever comes up using the ladder breaking system ...

      if (current_block->true_block != current_block->next_block &&
          current_block->merge == SPIRBlock::MergeSelection)
      {
        uint32_t ids = ir.increase_bound_by(2);

        auto &type = set<SPIRType>(ids, OpTypeInt);
        type.basetype = SPIRType::Int;
        type.width = 32;
        auto &c = set<SPIRConstant>(ids + 1, ids);

        current_block->condition = c.self;
        current_block->default_block = current_block->true_block;
        current_block->terminator = SPIRBlock::MultiSelect;
        ir.block_meta[current_block->next_block] &= ~ParsedIR::BLOCK_META_SELECTION_MERGE_BIT;
        ir.block_meta[current_block->next_block] |= ParsedIR::BLOCK_META_MULTISELECT_MERGE_BIT;
      }
      else
      {
        // Collapse loops if we have to.
        bool collapsed_loop = current_block->true_block == current_block->merge_block &&
                              current_block->merge == SPIRBlock::MergeLoop;

        if (collapsed_loop)
        {
          ir.block_meta[current_block->merge_block] &= ~ParsedIR::BLOCK_META_LOOP_MERGE_BIT;
          ir.block_meta[current_block->continue_block] &= ~ParsedIR::BLOCK_META_CONTINUE_BIT;
        }

        current_block->next_block = current_block->true_block;
        current_block->condition = 0;
        current_block->true_block = 0;
        current_block->false_block = 0;
        current_block->merge_block = 0;
        current_block->merge = SPIRBlock::MergeNone;
        current_block->terminator = SPIRBlock::Direct;
      }
    }

    current_block = nullptr;
    break;
  }

  case OpSwitch:
  {
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to end a non-existing block.");

    current_block->terminator = SPIRBlock::MultiSelect;

    current_block->condition = ops[0];
    current_block->default_block = ops[1];

    uint32_t remaining_ops = length - 2;
    if ((remaining_ops % 2) == 0)
    {
      for (uint32_t i = 2; i + 2 <= length; i += 2)
        current_block->cases_32bit.push_back({ ops[i], ops[i + 1] });
    }

    if ((remaining_ops % 3) == 0)
    {
      for (uint32_t i = 2; i + 3 <= length; i += 3)
      {
        uint64_t value = (static_cast<uint64_t>(ops[i + 1]) << 32) | ops[i];
        current_block->cases_64bit.push_back({ value, ops[i + 2] });
      }
    }

    // If we jump to next block, make it break instead since we're inside a switch case block at that point.
    ir.block_meta[current_block->next_block] |= ParsedIR::BLOCK_META_MULTISELECT_MERGE_BIT;

    current_block = nullptr;
    break;
  }

  case OpKill:
  case OpTerminateInvocation:
  {
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to end a non-existing block.");
    current_block->terminator = SPIRBlock::Kill;
    current_block = nullptr;
    break;
  }

  case OpTerminateRayKHR:
    // NV variant is not a terminator.
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to end a non-existing block.");
    current_block->terminator = SPIRBlock::TerminateRay;
    current_block = nullptr;
    break;

  case OpIgnoreIntersectionKHR:
    // NV variant is not a terminator.
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to end a non-existing block.");
    current_block->terminator = SPIRBlock::IgnoreIntersection;
    current_block = nullptr;
    break;

  case OpEmitMeshTasksEXT:
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to end a non-existing block.");
    current_block->terminator = SPIRBlock::EmitMeshTasks;
    for (uint32_t i = 0; i < 3; i++)
      current_block->mesh.groups[i] = ops[i];
    current_block->mesh.payload = length >= 4 ? ops[3] : 0;
    current_block = nullptr;
    // Currently glslang is bugged and does not treat EmitMeshTasksEXT as a terminator.
    ignore_trailing_block_opcodes = true;
    break;

  case OpAbortKHR:
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to end a non-existing block.");
    current_block->terminator = SPIRBlock::ShaderAbort;
    current_block->shader_abort.physical_type = ops[0];
    current_block->shader_abort.payload = ops[1];
    current_block = nullptr;
    break;

  case OpReturn:
  {
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to end a non-existing block.");
    current_block->terminator = SPIRBlock::Return;
    current_block = nullptr;
    break;
  }

  case OpReturnValue:
  {
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to end a non-existing block.");
    current_block->terminator = SPIRBlock::Return;
    current_block->return_value = ops[0];
    current_block = nullptr;
    break;
  }

  case OpUnreachable:
  {
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to end a non-existing block.");
    current_block->terminator = SPIRBlock::Unreachable;
    current_block = nullptr;
    break;
  }

  case OpSelectionMerge:
  {
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to modify a non-existing block.");

    current_block->next_block = ops[0];
    current_block->merge = SPIRBlock::MergeSelection;
    ir.block_meta[current_block->next_block] |= ParsedIR::BLOCK_META_SELECTION_MERGE_BIT;

    if (length >= 2)
    {
      if (ops[1] & SelectionControlFlattenMask)
        current_block->hint = SPIRBlock::HintFlatten;
      else if (ops[1] & SelectionControlDontFlattenMask)
        current_block->hint = SPIRBlock::HintDontFlatten;
    }
    break;
  }

  case OpLoopMerge:
  {
    if (!current_block)
      SPIRV_CROSS_THROW("Trying to modify a non-existing block.");

    current_block->merge_block = ops[0];
    current_block->continue_block = ops[1];
    current_block->merge = SPIRBlock::MergeLoop;

    ir.block_meta[current_block->self] |= ParsedIR::BLOCK_META_LOOP_HEADER_BIT;
    ir.block_meta[current_block->merge_block] |= ParsedIR::BLOCK_META_LOOP_MERGE_BIT;

    ir.continue_block_to_loop_header[current_block->continue_block] = BlockID(current_block->self);

    // Don't add loop headers to continue blocks,
    // which would make it impossible branch into the loop header since
    // they are treated as continues.
    if (current_block->continue_block != BlockID(current_block->self))
      ir.block_meta[current_block->continue_block] |= ParsedIR::BLOCK_META_CONTINUE_BIT;

    if (length >= 3)
    {
      if (ops[2] & LoopControlUnrollMask)
        current_block->hint = SPIRBlock::HintUnroll;
      else if (ops[2] & LoopControlDontUnrollMask)
        current_block->hint = SPIRBlock::HintDontUnroll;
    }
    break;
  }

  case OpSpecConstantOp:
  {
    if (length < 3)
      SPIRV_CROSS_THROW("OpSpecConstantOp not enough arguments.");

    uint32_t result_type = ops[0];
    uint32_t id = ops[1];
    auto spec_op = static_cast<Op>(ops[2]);

    set<SPIRConstantOp>(id, result_type, spec_op, ops + 3, length - 3);
    break;
  }

  case OpLine:
  {
    // OpLine might come at global scope, but we don't care about those since they will not be declared in any
    // meaningful correct order.
    // Ignore all OpLine directives which live outside a function.
    if (current_block)
      current_block->ops.push_back(instruction);

    // Line directives may arrive before first OpLabel.
    // Treat this as the line of the function declaration,
    // so warnings for arguments can propagate properly.
    if (current_function)
    {
      // Store the first one we find and emit it before creating the function prototype.
      if (current_function->entry_line.file_id == 0)
      {
        current_function->entry_line.file_id = ops[0];
        current_function->entry_line.line_literal = ops[1];
      }
    }

    uint32_t file = ops[0];
    uint32_t line = ops[1];

    for (auto &source : ir.sources)
    {
      if (source.file_id == file)
      {
        source.line_markers.emplace_back();
        auto &marker = source.line_markers.back();
        marker.line = line;
        marker.offset = instruction.offset - 1;
        marker.function_id = current_function ? current_function->self : ID(0);
        marker.block_id = current_block ? current_block->self : ID(0);
        break;
      }
    }

    break;
  }

  case OpNoLine:
  {
    // OpNoLine might come at global scope.
    if (current_block)
      current_block->ops.push_back(instruction);
    break;
  }

  // Actual opcodes.
  default:
  {
    if (length >= 2)
    {
      const auto *type = maybe_get<SPIRType>(ops[0]);
      if (type)
        ir.load_type_width.insert({ ops[1], type->width });
    }

    if (!current_block)
      SPIRV_CROSS_THROW("Currently no block to insert opcode.");

    current_block->ops.push_back(instruction);
    break;
  }
  }
}

bool Parser::types_are_logically_equivalent(const SPIRType &a, const SPIRType &b) const
{
  unordered_set<uint64_t> visited;
  return types_are_logically_equivalent(a, b, visited);
}

bool Parser::types_are_logically_equivalent(const SPIRType &a, const SPIRType &b,
                                            unordered_set<uint64_t> &visited) const
{
  if (a.basetype != b.basetype)
    return false;
  if (a.width != b.width)
    return false;
  if (a.vecsize != b.vecsize)
    return false;
  if (a.columns != b.columns)
    return false;
  if (a.array.size() != b.array.size())
    return false;

  size_t array_count = a.array.size();
  if (array_count && memcmp(a.array.data(), b.array.data(), array_count * sizeof(uint32_t)) != 0)
    return false;

  if (a.basetype == SPIRType::Image || a.basetype == SPIRType::SampledImage)
  {
    if (memcmp(&a.image, &b.image, sizeof(SPIRType::Image)) != 0)
      return false;
  }

  if (a.member_types.size() != b.member_types.size())
    return false;

  // Buffer references let a struct point back to itself. If we're already
  // comparing this pair, assume it matches and let the other members decide.
  if (!visited.insert((uint64_t(a.self) << 32) | uint64_t(b.self)).second)
    return true;

  size_t member_types = a.member_types.size();
  for (size_t i = 0; i < member_types; i++)
  {
    if (!types_are_logically_equivalent(get<SPIRType>(a.member_types[i]), get<SPIRType>(b.member_types[i]),
                                        visited))
      return false;
  }

  return true;
}

bool Parser::variable_storage_is_aliased(const SPIRVariable &v) const
{
  auto &type = get<SPIRType>(v.basetype);

  auto *type_meta = ir.find_meta(type.self);

  bool ssbo = v.storage == StorageClassStorageBuffer ||
              (type_meta && type_meta->decoration.decoration_flags.get(DecorationBufferBlock));
  bool image = type.basetype == SPIRType::Image;
  bool counter = type.basetype == SPIRType::AtomicCounter;

  bool is_restrict;
  if (ssbo)
    is_restrict = ir.get_buffer_block_flags(v).get(DecorationRestrict);
  else
    is_restrict = ir.has_decoration(v.self, DecorationRestrict);

  return !is_restrict && (ssbo || image || counter);
}
} // namespace SPIRV_CROSS_NAMESPACE

Coverage Report

Created: 2026-11-12 06:40