/src/openssl/crypto/bio/b_sock2.c

Source (jump to first uncovered line)
/*
 * Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
 *
 * Licensed under the OpenSSL license (the "License").  You may not use
 * this file except in compliance with the License.  You can obtain a copy
 * in the file LICENSE in the source distribution or at
 * https://www.openssl.org/source/license.html
 */

#include <stdio.h>
#include <stdlib.h>
#include <errno.h>

#include "bio_lcl.h"

#include <openssl/err.h>

#ifndef OPENSSL_NO_SOCK
# ifdef SO_MAXCONN
#  define MAX_LISTEN  SO_MAXCONN
# elif defined(SOMAXCONN)
#  define MAX_LISTEN  SOMAXCONN
# else
#  define MAX_LISTEN  32
# endif

/*-
 * BIO_socket - create a socket
 * @domain: the socket domain (AF_INET, AF_INET6, AF_UNIX, ...)
 * @socktype: the socket type (SOCK_STEAM, SOCK_DGRAM)
 * @protocol: the protocol to use (IPPROTO_TCP, IPPROTO_UDP)
 * @options: BIO socket options (currently unused)
 *
 * Creates a socket.  This should be called before calling any
 * of BIO_connect and BIO_listen.
 *
 * Returns the file descriptor on success or INVALID_SOCKET on failure.  On
 * failure errno is set, and a status is added to the OpenSSL error stack.
 */
int BIO_socket(int domain, int socktype, int protocol, int options)
{
    int sock = -1;

    if (BIO_sock_init() != 1)
        return INVALID_SOCKET;

    sock = socket(domain, socktype, protocol);
    if (sock == -1) {
        SYSerr(SYS_F_SOCKET, get_last_socket_error());
        BIOerr(BIO_F_BIO_SOCKET, BIO_R_UNABLE_TO_CREATE_SOCKET);
        return INVALID_SOCKET;
    }

    return sock;
}

/*-
 * BIO_connect - connect to an address
 * @sock: the socket to connect with
 * @addr: the address to connect to
 * @options: BIO socket options
 *
 * Connects to the address using the given socket and options.
 *
 * Options can be a combination of the following:
 * - BIO_SOCK_KEEPALIVE: enable regularly sending keep-alive messages.
 * - BIO_SOCK_NONBLOCK: Make the socket non-blocking.
 * - BIO_SOCK_NODELAY: don't delay small messages.
 *
 * options holds BIO socket options that can be used
 * You should call this for every address returned by BIO_lookup
 * until the connection is successful.
 *
 * Returns 1 on success or 0 on failure.  On failure errno is set
 * and an error status is added to the OpenSSL error stack.
 */
int BIO_connect(int sock, const BIO_ADDR *addr, int options)
{
    const int on = 1;

    if (sock == -1) {
        BIOerr(BIO_F_BIO_CONNECT, BIO_R_INVALID_SOCKET);
        return 0;
    }

    if (!BIO_socket_nbio(sock, (options & BIO_SOCK_NONBLOCK) != 0))
        return 0;

    if (options & BIO_SOCK_KEEPALIVE) {
        if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE,
                       (const void *)&on, sizeof(on)) != 0) {
            SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
            BIOerr(BIO_F_BIO_CONNECT, BIO_R_UNABLE_TO_KEEPALIVE);
            return 0;
        }
    }

    if (options & BIO_SOCK_NODELAY) {
        if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY,
                       (const void *)&on, sizeof(on)) != 0) {
            SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
            BIOerr(BIO_F_BIO_CONNECT, BIO_R_UNABLE_TO_NODELAY);
            return 0;
        }
    }

    if (connect(sock, BIO_ADDR_sockaddr(addr),
                BIO_ADDR_sockaddr_size(addr)) == -1) {
        if (!BIO_sock_should_retry(-1)) {
            SYSerr(SYS_F_CONNECT, get_last_socket_error());
            BIOerr(BIO_F_BIO_CONNECT, BIO_R_CONNECT_ERROR);
        }
        return 0;
    }
    return 1;
}

/*-
 * BIO_bind - bind socket to address
 * @sock: the socket to set
 * @addr: local address to bind to
 * @options: BIO socket options
 *
 * Binds to the address using the given socket and options.
 *
 * Options can be a combination of the following:
 * - BIO_SOCK_REUSEADDR: Try to reuse the address and port combination
 *   for a recently closed port.
 *
 * When restarting the program it could be that the port is still in use.  If
 * you set to BIO_SOCK_REUSEADDR option it will try to reuse the port anyway.
 * It's recommended that you use this.
 */
int BIO_bind(int sock, const BIO_ADDR *addr, int options)
{
    int on = 1;

    if (sock == -1) {
        BIOerr(BIO_F_BIO_BIND, BIO_R_INVALID_SOCKET);
        return 0;
    }

# ifndef OPENSSL_SYS_WINDOWS
    /*
     * SO_REUSEADDR has different behavior on Windows than on
     * other operating systems, don't set it there.
     */
    if (options & BIO_SOCK_REUSEADDR) {
        if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR,
                       (const void *)&on, sizeof(on)) != 0) {
            SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
            BIOerr(BIO_F_BIO_BIND, BIO_R_UNABLE_TO_REUSEADDR);
            return 0;
        }
    }
# endif

    if (bind(sock, BIO_ADDR_sockaddr(addr), BIO_ADDR_sockaddr_size(addr)) != 0) {
        SYSerr(SYS_F_BIND, get_last_socket_error());
        BIOerr(BIO_F_BIO_BIND, BIO_R_UNABLE_TO_BIND_SOCKET);
        return 0;
    }

    return 1;
}

/*-
 * BIO_listen - Creates a listen socket
 * @sock: the socket to listen with
 * @addr: local address to bind to
 * @options: BIO socket options
 *
 * Binds to the address using the given socket and options, then
 * starts listening for incoming connections.
 *
 * Options can be a combination of the following:
 * - BIO_SOCK_KEEPALIVE: enable regularly sending keep-alive messages.
 * - BIO_SOCK_NONBLOCK: Make the socket non-blocking.
 * - BIO_SOCK_NODELAY: don't delay small messages.
 * - BIO_SOCK_REUSEADDR: Try to reuse the address and port combination
 *   for a recently closed port.
 * - BIO_SOCK_V6_ONLY: When creating an IPv6 socket, make it listen only
 *   for IPv6 addresses and not IPv4 addresses mapped to IPv6.
 *
 * It's recommended that you set up both an IPv6 and IPv4 listen socket, and
 * then check both for new clients that connect to it.  You want to set up
 * the socket as non-blocking in that case since else it could hang.
 *
 * Not all operating systems support IPv4 addresses on an IPv6 socket, and for
 * others it's an option.  If you pass the BIO_LISTEN_V6_ONLY it will try to
 * create the IPv6 sockets to only listen for IPv6 connection.
 *
 * It could be that the first BIO_listen() call will listen to all the IPv6
 * and IPv4 addresses and that then trying to bind to the IPv4 address will
 * fail.  We can't tell the difference between already listening ourself to
 * it and someone else listening to it when failing and errno is EADDRINUSE, so
 * it's recommended to not give an error in that case if the first call was
 * successful.
 *
 * When restarting the program it could be that the port is still in use.  If
 * you set to BIO_SOCK_REUSEADDR option it will try to reuse the port anyway.
 * It's recommended that you use this.
 */
int BIO_listen(int sock, const BIO_ADDR *addr, int options)
{
    int on = 1;
    int socktype;
    socklen_t socktype_len = sizeof(socktype);

    if (sock == -1) {
        BIOerr(BIO_F_BIO_LISTEN, BIO_R_INVALID_SOCKET);
        return 0;
    }

    if (getsockopt(sock, SOL_SOCKET, SO_TYPE,
                   (void *)&socktype, &socktype_len) != 0
        || socktype_len != sizeof(socktype)) {
        SYSerr(SYS_F_GETSOCKOPT, get_last_socket_error());
        BIOerr(BIO_F_BIO_LISTEN, BIO_R_GETTING_SOCKTYPE);
        return 0;
    }

    if (!BIO_socket_nbio(sock, (options & BIO_SOCK_NONBLOCK) != 0))
        return 0;

    if (options & BIO_SOCK_KEEPALIVE) {
        if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE,
                       (const void *)&on, sizeof(on)) != 0) {
            SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
            BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_KEEPALIVE);
            return 0;
        }
    }

    if (options & BIO_SOCK_NODELAY) {
        if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY,
                       (const void *)&on, sizeof(on)) != 0) {
            SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
            BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_NODELAY);
            return 0;
        }
    }

# ifdef IPV6_V6ONLY
    if (BIO_ADDR_family(addr) == AF_INET6) {
        /*
         * Note: Windows default of IPV6_V6ONLY is ON, and Linux is OFF.
         * Therefore we always have to use setsockopt here.
         */
        on = options & BIO_SOCK_V6_ONLY ? 1 : 0;
        if (setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY,
                       (const void *)&on, sizeof(on)) != 0) {
            SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
            BIOerr(BIO_F_BIO_LISTEN, BIO_R_LISTEN_V6_ONLY);
            return 0;
        }
    }
# endif

    if (!BIO_bind(sock, addr, options))
        return 0;

    if (socktype != SOCK_DGRAM && listen(sock, MAX_LISTEN) == -1) {
        SYSerr(SYS_F_LISTEN, get_last_socket_error());
        BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_LISTEN_SOCKET);
        return 0;
    }

    return 1;
}

/*-
 * BIO_accept_ex - Accept new incoming connections
 * @sock: the listening socket
 * @addr: the BIO_ADDR to store the peer address in
 * @options: BIO socket options, applied on the accepted socket.
 *
 */
int BIO_accept_ex(int accept_sock, BIO_ADDR *addr_, int options)
{
    socklen_t len;
    int accepted_sock;
    BIO_ADDR locaddr;
    BIO_ADDR *addr = addr_ == NULL ? &locaddr : addr_;

    len = sizeof(*addr);
    accepted_sock = accept(accept_sock,
                           BIO_ADDR_sockaddr_noconst(addr), &len);
    if (accepted_sock == -1) {
        if (!BIO_sock_should_retry(accepted_sock)) {
            SYSerr(SYS_F_ACCEPT, get_last_socket_error());
            BIOerr(BIO_F_BIO_ACCEPT_EX, BIO_R_ACCEPT_ERROR);
        }
        return INVALID_SOCKET;
    }

    if (!BIO_socket_nbio(accepted_sock, (options & BIO_SOCK_NONBLOCK) != 0)) {
        closesocket(accepted_sock);
        return INVALID_SOCKET;
    }

    return accepted_sock;
}

/*-
 * BIO_closesocket - Close a socket
 * @sock: the socket to close
 */
int BIO_closesocket(int sock)
{
    if (closesocket(sock) < 0)
        return 0;
    return 1;
}
#endif

Coverage Report

Created: 2018-08-29 13:53

Line	Count	Source (jump to first uncovered line)
1		/*
2		* Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
3		*
4		* Licensed under the OpenSSL license (the "License"). You may not use
5		* this file except in compliance with the License. You can obtain a copy
6		* in the file LICENSE in the source distribution or at
7		* https://www.openssl.org/source/license.html
8		*/
9
10		#include <stdio.h>
11		#include <stdlib.h>
12		#include <errno.h>
13
14		#include "bio_lcl.h"
15
16		#include <openssl/err.h>
17
18		#ifndef OPENSSL_NO_SOCK
19		# ifdef SO_MAXCONN
20		# define MAX_LISTEN SO_MAXCONN
21		# elif defined(SOMAXCONN)
22	0	# define MAX_LISTEN SOMAXCONN
23		# else
24		# define MAX_LISTEN 32
25		# endif
26
27		/*-
28		* BIO_socket - create a socket
29		* @domain: the socket domain (AF_INET, AF_INET6, AF_UNIX, ...)
30		* @socktype: the socket type (SOCK_STEAM, SOCK_DGRAM)
31		* @protocol: the protocol to use (IPPROTO_TCP, IPPROTO_UDP)
32		* @options: BIO socket options (currently unused)
33		*
34		* Creates a socket. This should be called before calling any
35		* of BIO_connect and BIO_listen.
36		*
37		* Returns the file descriptor on success or INVALID_SOCKET on failure. On
38		* failure errno is set, and a status is added to the OpenSSL error stack.
39		*/
40		int BIO_socket(int domain, int socktype, int protocol, int options)
41	0	{
42	0	int sock = -1;
43	0
44	0	if (BIO_sock_init() != 1)
45	0	return INVALID_SOCKET;
46	0
47	0	sock = socket(domain, socktype, protocol);
48	0	if (sock == -1) {
49	0	SYSerr(SYS_F_SOCKET, get_last_socket_error());
50	0	BIOerr(BIO_F_BIO_SOCKET, BIO_R_UNABLE_TO_CREATE_SOCKET);
51	0	return INVALID_SOCKET;
52	0	}
53	0
54	0	return sock;
55	0	}
56
57		/*-
58		* BIO_connect - connect to an address
59		* @sock: the socket to connect with
60		* @addr: the address to connect to
61		* @options: BIO socket options
62		*
63		* Connects to the address using the given socket and options.
64		*
65		* Options can be a combination of the following:
66		* - BIO_SOCK_KEEPALIVE: enable regularly sending keep-alive messages.
67		* - BIO_SOCK_NONBLOCK: Make the socket non-blocking.
68		* - BIO_SOCK_NODELAY: don't delay small messages.
69		*
70		* options holds BIO socket options that can be used
71		* You should call this for every address returned by BIO_lookup
72		* until the connection is successful.
73		*
74		* Returns 1 on success or 0 on failure. On failure errno is set
75		* and an error status is added to the OpenSSL error stack.
76		*/
77		int BIO_connect(int sock, const BIO_ADDR *addr, int options)
78	0	{
79	0	const int on = 1;
80	0
81	0	if (sock == -1) {
82	0	BIOerr(BIO_F_BIO_CONNECT, BIO_R_INVALID_SOCKET);
83	0	return 0;
84	0	}
85	0
86	0	if (!BIO_socket_nbio(sock, (options & BIO_SOCK_NONBLOCK) != 0))
87	0	return 0;
88	0
89	0	if (options & BIO_SOCK_KEEPALIVE) {
90	0	if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE,
91	0	(const void *)&on, sizeof(on)) != 0) {
92	0	SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
93	0	BIOerr(BIO_F_BIO_CONNECT, BIO_R_UNABLE_TO_KEEPALIVE);
94	0	return 0;
95	0	}
96	0	}
97	0
98	0	if (options & BIO_SOCK_NODELAY) {
99	0	if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY,
100	0	(const void *)&on, sizeof(on)) != 0) {
101	0	SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
102	0	BIOerr(BIO_F_BIO_CONNECT, BIO_R_UNABLE_TO_NODELAY);
103	0	return 0;
104	0	}
105	0	}
106	0
107	0	if (connect(sock, BIO_ADDR_sockaddr(addr),
108	0	BIO_ADDR_sockaddr_size(addr)) == -1) {
109	0	if (!BIO_sock_should_retry(-1)) {
110	0	SYSerr(SYS_F_CONNECT, get_last_socket_error());
111	0	BIOerr(BIO_F_BIO_CONNECT, BIO_R_CONNECT_ERROR);
112	0	}
113	0	return 0;
114	0	}
115	0	return 1;
116	0	}
117
118		/*-
119		* BIO_bind - bind socket to address
120		* @sock: the socket to set
121		* @addr: local address to bind to
122		* @options: BIO socket options
123		*
124		* Binds to the address using the given socket and options.
125		*
126		* Options can be a combination of the following:
127		* - BIO_SOCK_REUSEADDR: Try to reuse the address and port combination
128		* for a recently closed port.
129		*
130		* When restarting the program it could be that the port is still in use. If
131		* you set to BIO_SOCK_REUSEADDR option it will try to reuse the port anyway.
132		* It's recommended that you use this.
133		*/
134		int BIO_bind(int sock, const BIO_ADDR *addr, int options)
135	0	{
136	0	int on = 1;
137	0
138	0	if (sock == -1) {
139	0	BIOerr(BIO_F_BIO_BIND, BIO_R_INVALID_SOCKET);
140	0	return 0;
141	0	}
142	0
143	0	# ifndef OPENSSL_SYS_WINDOWS
144	0	/*
145	0	* SO_REUSEADDR has different behavior on Windows than on
146	0	* other operating systems, don't set it there.
147	0	*/
148	0	if (options & BIO_SOCK_REUSEADDR) {
149	0	if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR,
150	0	(const void *)&on, sizeof(on)) != 0) {
151	0	SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
152	0	BIOerr(BIO_F_BIO_BIND, BIO_R_UNABLE_TO_REUSEADDR);
153	0	return 0;
154	0	}
155	0	}
156	0	# endif
157	0
158	0	if (bind(sock, BIO_ADDR_sockaddr(addr), BIO_ADDR_sockaddr_size(addr)) != 0) {
159	0	SYSerr(SYS_F_BIND, get_last_socket_error());
160	0	BIOerr(BIO_F_BIO_BIND, BIO_R_UNABLE_TO_BIND_SOCKET);
161	0	return 0;
162	0	}
163	0
164	0	return 1;
165	0	}
166
167		/*-
168		* BIO_listen - Creates a listen socket
169		* @sock: the socket to listen with
170		* @addr: local address to bind to
171		* @options: BIO socket options
172		*
173		* Binds to the address using the given socket and options, then
174		* starts listening for incoming connections.
175		*
176		* Options can be a combination of the following:
177		* - BIO_SOCK_KEEPALIVE: enable regularly sending keep-alive messages.
178		* - BIO_SOCK_NONBLOCK: Make the socket non-blocking.
179		* - BIO_SOCK_NODELAY: don't delay small messages.
180		* - BIO_SOCK_REUSEADDR: Try to reuse the address and port combination
181		* for a recently closed port.
182		* - BIO_SOCK_V6_ONLY: When creating an IPv6 socket, make it listen only
183		* for IPv6 addresses and not IPv4 addresses mapped to IPv6.
184		*
185		* It's recommended that you set up both an IPv6 and IPv4 listen socket, and
186		* then check both for new clients that connect to it. You want to set up
187		* the socket as non-blocking in that case since else it could hang.
188		*
189		* Not all operating systems support IPv4 addresses on an IPv6 socket, and for
190		* others it's an option. If you pass the BIO_LISTEN_V6_ONLY it will try to
191		* create the IPv6 sockets to only listen for IPv6 connection.
192		*
193		* It could be that the first BIO_listen() call will listen to all the IPv6
194		* and IPv4 addresses and that then trying to bind to the IPv4 address will
195		* fail. We can't tell the difference between already listening ourself to
196		* it and someone else listening to it when failing and errno is EADDRINUSE, so
197		* it's recommended to not give an error in that case if the first call was
198		* successful.
199		*
200		* When restarting the program it could be that the port is still in use. If
201		* you set to BIO_SOCK_REUSEADDR option it will try to reuse the port anyway.
202		* It's recommended that you use this.
203		*/
204		int BIO_listen(int sock, const BIO_ADDR *addr, int options)
205	0	{
206	0	int on = 1;
207	0	int socktype;
208	0	socklen_t socktype_len = sizeof(socktype);
209	0
210	0	if (sock == -1) {
211	0	BIOerr(BIO_F_BIO_LISTEN, BIO_R_INVALID_SOCKET);
212	0	return 0;
213	0	}
214	0
215	0	if (getsockopt(sock, SOL_SOCKET, SO_TYPE,
216	0	(void *)&socktype, &socktype_len) != 0
217	0	\|\| socktype_len != sizeof(socktype)) {
218	0	SYSerr(SYS_F_GETSOCKOPT, get_last_socket_error());
219	0	BIOerr(BIO_F_BIO_LISTEN, BIO_R_GETTING_SOCKTYPE);
220	0	return 0;
221	0	}
222	0
223	0	if (!BIO_socket_nbio(sock, (options & BIO_SOCK_NONBLOCK) != 0))
224	0	return 0;
225	0
226	0	if (options & BIO_SOCK_KEEPALIVE) {
227	0	if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE,
228	0	(const void *)&on, sizeof(on)) != 0) {
229	0	SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
230	0	BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_KEEPALIVE);
231	0	return 0;
232	0	}
233	0	}
234	0
235	0	if (options & BIO_SOCK_NODELAY) {
236	0	if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY,
237	0	(const void *)&on, sizeof(on)) != 0) {
238	0	SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
239	0	BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_NODELAY);
240	0	return 0;
241	0	}
242	0	}
243	0
244	0	# ifdef IPV6_V6ONLY
245	0	if (BIO_ADDR_family(addr) == AF_INET6) {
246	0	/*
247	0	* Note: Windows default of IPV6_V6ONLY is ON, and Linux is OFF.
248	0	* Therefore we always have to use setsockopt here.
249	0	*/
250	0	on = options & BIO_SOCK_V6_ONLY ? 1 : 0;
251	0	if (setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY,
252	0	(const void *)&on, sizeof(on)) != 0) {
253	0	SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
254	0	BIOerr(BIO_F_BIO_LISTEN, BIO_R_LISTEN_V6_ONLY);
255	0	return 0;
256	0	}
257	0	}
258	0	# endif
259	0
260	0	if (!BIO_bind(sock, addr, options))
261	0	return 0;
262	0
263	0	if (socktype != SOCK_DGRAM && listen(sock, MAX_LISTEN) == -1) {
264	0	SYSerr(SYS_F_LISTEN, get_last_socket_error());
265	0	BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_LISTEN_SOCKET);
266	0	return 0;
267	0	}
268	0
269	0	return 1;
270	0	}
271
272		/*-
273		* BIO_accept_ex - Accept new incoming connections
274		* @sock: the listening socket
275		* @addr: the BIO_ADDR to store the peer address in
276		* @options: BIO socket options, applied on the accepted socket.
277		*
278		*/
279		int BIO_accept_ex(int accept_sock, BIO_ADDR *addr_, int options)
280	0	{
281	0	socklen_t len;
282	0	int accepted_sock;
283	0	BIO_ADDR locaddr;
284	0	BIO_ADDR *addr = addr_ == NULL ? &locaddr : addr_;
285	0
286	0	len = sizeof(*addr);
287	0	accepted_sock = accept(accept_sock,
288	0	BIO_ADDR_sockaddr_noconst(addr), &len);
289	0	if (accepted_sock == -1) {
290	0	if (!BIO_sock_should_retry(accepted_sock)) {
291	0	SYSerr(SYS_F_ACCEPT, get_last_socket_error());
292	0	BIOerr(BIO_F_BIO_ACCEPT_EX, BIO_R_ACCEPT_ERROR);
293	0	}
294	0	return INVALID_SOCKET;
295	0	}
296	0
297	0	if (!BIO_socket_nbio(accepted_sock, (options & BIO_SOCK_NONBLOCK) != 0)) {
298	0	closesocket(accepted_sock);
299	0	return INVALID_SOCKET;
300	0	}
301	0
302	0	return accepted_sock;
303	0	}
304
305		/*-
306		* BIO_closesocket - Close a socket
307		* @sock: the socket to close
308		*/
309		int BIO_closesocket(int sock)
310	0	{
311	0	if (closesocket(sock) < 0)
312	0	return 0;
313	0	return 1;
314	0	}
315		#endif