/src/wireshark/epan/dissectors/packet-smtp.c

Source
/* packet-smtp.c
 * Routines for SMTP packet disassembly
 *
 * Copyright (c) 2000 by Richard Sharpe <rsharpe@ns.aus.com>
 *
 * Added RFC 4954 SMTP Authentication
 *     Michael Mann * Copyright 2012
 * Added RFC 2920 Pipelining and RFC 3030 BDAT Pipelining
 *     John Thacker <johnthacker@gmail.com>
 *
 * Wireshark - Network traffic analyzer
 * By Gerald Combs <gerald@wireshark.org>
 * Copyright 1999 Gerald Combs
 *
 * SPDX-License-Identifier: GPL-2.0-or-later
 */

#include "config.h"

#include <stdlib.h>

#include <epan/packet.h>
#include <epan/conversation.h>
#include <epan/prefs.h>
#include <epan/strutil.h>
#include <epan/reassemble.h>
#include <epan/proto_data.h>
#include <epan/credentials.h>

#include <tap.h>

#include <wsutil/str_util.h>
#include "packet-tls.h"
#include "packet-tls-utils.h"

/* RFC 2821 */
#define TCP_PORT_SMTP      "25"
#define TCP_PORT_SSL_SMTP 465

/* RFC 4409 */
#define TCP_PORT_SUBMISSION 587

void proto_register_smtp(void);
void proto_reg_handoff_smtp(void);

static int proto_smtp;

static int credentials_tap;

static int hf_smtp_req;
static int hf_smtp_rsp;
static int hf_smtp_message;
static int hf_smtp_command_line;
static int hf_smtp_req_command;
static int hf_smtp_req_parameter;
static int hf_smtp_response;
static int hf_smtp_rsp_code;
static int hf_smtp_rsp_parameter;
static int hf_smtp_username;
static int hf_smtp_password;
static int hf_smtp_username_password;
static int hf_smtp_eom;

static int hf_smtp_data_fragments;
static int hf_smtp_data_fragment;
static int hf_smtp_data_fragment_overlap;
static int hf_smtp_data_fragment_overlap_conflicts;
static int hf_smtp_data_fragment_multiple_tails;
static int hf_smtp_data_fragment_too_long_fragment;
static int hf_smtp_data_fragment_error;
static int hf_smtp_data_fragment_count;
static int hf_smtp_data_reassembled_in;
static int hf_smtp_data_reassembled_length;

static int ett_smtp;
static int ett_smtp_cmdresp;

static int ett_smtp_data_fragment;
static int ett_smtp_data_fragments;

static expert_field ei_smtp_base64_decode;
static expert_field ei_smtp_rsp_code;

static bool    smtp_auth_parameter_decoding_enabled;
/* desegmentation of SMTP command and response lines */
static bool    smtp_desegment              = true;
static bool    smtp_data_desegment         = true;

static reassembly_table smtp_data_reassembly_table;

static const fragment_items smtp_data_frag_items = {
  /* Fragment subtrees */
  &ett_smtp_data_fragment,
  &ett_smtp_data_fragments,
  /* Fragment fields */
  &hf_smtp_data_fragments,
  &hf_smtp_data_fragment,
  &hf_smtp_data_fragment_overlap,
  &hf_smtp_data_fragment_overlap_conflicts,
  &hf_smtp_data_fragment_multiple_tails,
  &hf_smtp_data_fragment_too_long_fragment,
  &hf_smtp_data_fragment_error,
  &hf_smtp_data_fragment_count,
  /* Reassembled in field */
  &hf_smtp_data_reassembled_in,
  /* Reassembled length field */
  &hf_smtp_data_reassembled_length,
  /* Reassembled data field */
  NULL,
  /* Tag */
  "DATA fragments"
};

static  dissector_handle_t smtp_handle;
static  dissector_handle_t tls_handle;
static  dissector_handle_t imf_handle;
static  dissector_handle_t ntlmssp_handle;
static  dissector_handle_t data_text_lines_handle;

/*
 * A CMD is an SMTP command, MESSAGE is the message portion, and EOM is the
 * last part of a message
 */
#define SMTP_PDU_CMD     0
#define SMTP_PDU_MESSAGE 1
#define SMTP_PDU_EOM     2

struct smtp_proto_data {
  uint16_t pdu_type;
  uint16_t conversation_id;
  bool more_frags;
  unsigned end_offset;
  struct smtp_proto_data *next;
};

/*
 * State information stored with a conversation.
 */
typedef enum {
  SMTP_STATE_START,                     /* Start of SMTP conversion */
  SMTP_STATE_READING_CMDS,              /* reading commands */
  SMTP_STATE_READING_DATA,              /* reading message data */
  SMTP_STATE_AWAITING_STARTTLS_RESPONSE /* sent STARTTLS, awaiting response */
} smtp_state_t;

typedef enum {
  SMTP_AUTH_STATE_NONE,               /*  No authentication seen or used */
  SMTP_AUTH_STATE_START,              /* Authentication started, waiting for username */
  SMTP_AUTH_STATE_USERNAME_REQ,       /* Received username request from server */
  SMTP_AUTH_STATE_USERNAME_RSP,       /* Received username response from client */
  SMTP_AUTH_STATE_PASSWORD_REQ,       /* Received password request from server */
  SMTP_AUTH_STATE_PASSWORD_RSP,       /* Received password request from server */
  SMTP_AUTH_STATE_PLAIN_START_REQ,    /* Received AUTH PLAIN command from client*/
  SMTP_AUTH_STATE_PLAIN_CRED_REQ,     /* Received AUTH PLAIN command including creds from client*/
  SMTP_AUTH_STATE_PLAIN_REQ,          /* Received AUTH PLAIN request from server */
  SMTP_AUTH_STATE_PLAIN_RSP,          /* Received AUTH PLAIN response from client */
  SMTP_AUTH_STATE_NTLM_REQ,           /* Received ntlm negotiate request from client */
  SMTP_AUTH_STATE_NTLM_CHALLANGE,     /* Received ntlm challenge request from server */
  SMTP_AUTH_STATE_NTLM_RSP,           /* Received ntlm auth request from client */
  SMTP_AUTH_STATE_SUCCESS,            /* Password received, authentication successful, start decoding */
  SMTP_AUTH_STATE_FAILED              /* authentication failed, no decoding */
} smtp_auth_state_t;

typedef enum {
  SMTP_MULTILINE_NONE,
  SMTP_MULTILINE_START,
  SMTP_MULTILINE_CONTINUE,
  SMTP_MULTILINE_END

} smtp_multiline_state_t;

struct smtp_session_state {
  smtp_state_t smtp_state;      /* Current state */
  smtp_auth_state_t auth_state; /* Current authentication state */
  /* Values that need to be saved because state machine can't be used during tree dissection */
  uint32_t first_auth_frame;    /* First frame involving authentication. */
  uint32_t username_frame;      /* Frame containing client username */
  uint32_t password_frame;      /* Frame containing client password */
  uint32_t last_auth_frame;     /* Last frame involving authentication. */
  char*    username;            /* The username in the authentication. */
  bool crlf_seen;           /* Have we seen a CRLF on the end of a packet */
  bool data_seen;           /* Have we seen a DATA command yet */
  uint32_t msg_read_len;        /* Length of BDAT message read so far */
  uint32_t msg_tot_len;         /* Total length of BDAT message */
  bool msg_last;            /* Is this the last BDAT chunk */
  uint32_t username_cmd_frame;  /* AUTH command contains username */
  uint32_t user_pass_cmd_frame; /* AUTH command contains username and password */
  uint32_t user_pass_frame;     /* Frame contains username and password */
  uint32_t ntlm_req_frame;      /* Frame containing NTLM request */
  uint32_t ntlm_cha_frame;      /* Frame containing NTLM challenge. */
  uint32_t ntlm_rsp_frame;      /* Frame containing NTLM response. */
};

/*
 * See
 *
 *      http://support.microsoft.com/default.aspx?scid=kb;[LN];812455
 *
 * for the Exchange extensions.
 */
static const struct {
  const char *command;
  int len;
} commands[] = {
  { "STARTTLS", 8 },            /* RFC 2487 */
  { "X-EXPS", 6 },              /* Microsoft Exchange */
  { "X-LINK2STATE", 12 },       /* Microsoft Exchange */
  { "XEXCH50", 7 }              /* Microsoft Exchange */
};

#define NCOMMANDS       array_length(commands)

/* The following were copied from RFC 2821 */
static const value_string response_codes_vs[] = {
  { 211, "System status, or system help reply" },
  { 214, "Help message" },
  { 220, "<domain> Service ready" },
  { 221, "<domain> Service closing transmission channel" },
  { 235, "Authentication successful" },
  { 250, "Requested mail action okay, completed" },
  { 251, "User not local; will forward to <forward-path>" },
  { 252, "Cannot VRFY user, but will accept message and attempt delivery" },
  { 334, "AUTH input" },
  { 354, "Start mail input; end with <CRLF>.<CRLF>" },
  { 421, "<domain> Service not available, closing transmission channel" },
  { 432, "A password transition is needed" },
  { 450, "Requested mail action not taken: mailbox unavailable" },
  { 451, "Requested action aborted: local error in processing" },
  { 452, "Requested action not taken: insufficient system storage" },
  { 454, "Temporary authentication failed" },
  { 500, "Syntax error, command unrecognized" },
  { 501, "Syntax error in parameters or arguments" },
  { 502, "Command not implemented" },
  { 503, "Bad sequence of commands" },
  { 504, "Command parameter not implemented" },
  { 530, "Authentication required" },
  { 534, "Authentication mechanism is too weak" },
  { 535, "Authentication credentials invalid" },
  { 538, "Encryption required for requested authentication mechanism" },
  { 550, "Requested action not taken: mailbox unavailable" },
  { 551, "User not local; please try <forward-path>" },
  { 552, "Requested mail action aborted: exceeded storage allocation" },
  { 553, "Requested action not taken: mailbox name not allowed" },
  { 554, "Transaction failed" },
  { 0, NULL }
};
static value_string_ext response_codes_vs_ext = VALUE_STRING_EXT_INIT(response_codes_vs);

static struct smtp_proto_data*
append_pdu(struct smtp_proto_data *spd_frame_data)
{
  DISSECTOR_ASSERT(spd_frame_data && spd_frame_data->next == NULL);
  struct smtp_proto_data *new_pdu = wmem_new0(wmem_file_scope(), struct smtp_proto_data);
  new_pdu->conversation_id = spd_frame_data->conversation_id;
  new_pdu->more_frags = true;
  spd_frame_data->next = new_pdu;

  return new_pdu;
}

static bool
line_is_smtp_command(const char *command, int commandlen)
{
  size_t i;

  /*
   * To quote RFC 821, "Command codes are four alphabetic
   * characters".
   *
   * However, there are some SMTP extensions that involve commands
   * longer than 4 characters and/or that contain non-alphabetic
   * characters; we treat them specially.
   *
   * XXX - should we just have a table of known commands?  Or would
   * that fail to catch some extensions we don't know about?
   */
  if (commandlen == 4 && g_ascii_isalpha(command[0]) &&
      g_ascii_isalpha(command[1]) && g_ascii_isalpha(command[2]) &&
      g_ascii_isalpha(command[3])) {
    /* standard 4-alphabetic command */
    return true;
  }

  /*
   * Check the list of non-4-alphabetic commands.
   */
  for (i = 0; i < NCOMMANDS; i++) {
    if (commandlen == commands[i].len &&
        g_ascii_strncasecmp(command, commands[i].command, commands[i].len) == 0)
      return true;
  }
  return false;
}

static void
dissect_smtp_data(tvbuff_t *tvb, unsigned offset, proto_tree *smtp_tree)
{
  unsigned next_offset;

  if (smtp_tree) {
    while (tvb_offset_exists(tvb, offset)) {
      /*
       * Find the end of the line.
       */
      tvb_find_line_end_remaining(tvb, offset, NULL, &next_offset);

      /*
       * Put this line.
       */
      proto_tree_add_item(smtp_tree, hf_smtp_message, tvb,
                          offset, next_offset - offset, ENC_ASCII);

      /*
       * Step to the next line.
       */
      offset = next_offset;
    }
  }
}

static void
dissect_ntlm_auth(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree,
                  const char *line)
{
    tvbuff_t *ntlm_tvb;

    ntlm_tvb = base64_to_tvb(tvb, line);
    if(tvb_strneql(ntlm_tvb, 0, "NTLMSSP", 7) == 0) {
      add_new_data_source(pinfo, ntlm_tvb, "NTLMSSP Data");
      call_dissector(ntlmssp_handle, ntlm_tvb, pinfo, tree);
    }
}

static void
decode_plain_auth(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree,
                  int a_offset, int a_linelen)
{
  int                        returncode;
  int                        length_user1;
  int                        length_user2;
  int                        length_pass;
  char                      *decrypt   = NULL;
  proto_item                *ti;
  size_t                     len = 0;

  decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, a_offset, a_linelen, ENC_ASCII);
  if (smtp_auth_parameter_decoding_enabled) {
    if (strlen(decrypt) > 1) {
      g_base64_decode_inplace(decrypt, &len);
      decrypt[len] = 0;
    }
    returncode = (int)len;
    if (returncode) {
      char* username;
      length_user1 = (int)strlen(decrypt);
      if (returncode >= (length_user1 + 1)) {
        length_user2 = (int)strlen(decrypt + length_user1 + 1);
        proto_tree_add_string(tree, hf_smtp_username, tvb,
                              a_offset, a_linelen, decrypt + length_user1 + 1);
        username = format_text(pinfo->pool, decrypt + length_user1 + 1, length_user2);
        col_append_fstr(pinfo->cinfo, COL_INFO, "User: %s", username);

        if (returncode >= (length_user1 + 1 + length_user2 + 1)) {
          length_pass = (int)strlen(decrypt + length_user1 + length_user2 + 2);
          proto_tree_add_string(tree, hf_smtp_password, tvb,
                                a_offset, length_pass, decrypt + length_user1 + length_user2 + 2);
          col_append_str(pinfo->cinfo, COL_INFO, " ");
          col_append_fstr(pinfo->cinfo, COL_INFO, " Pass: %s",
                          format_text(pinfo->pool, decrypt + length_user1 + length_user2 + 2, length_pass));

          tap_credential_t* auth = wmem_new0(pinfo->pool, tap_credential_t);
          auth->num = pinfo->num;
          auth->username_num = pinfo->num;
          auth->password_hf_id = hf_smtp_password;
          auth->username = username;
          auth->proto = "SMTP";
          tap_queue_packet(credentials_tap, pinfo, auth);
        }
      }
    }
  }
  else {
    ti = proto_tree_add_item(tree, hf_smtp_username_password, tvb,
                          a_offset, a_linelen, ENC_ASCII);
    expert_add_info(pinfo, ti, &ei_smtp_base64_decode);
    col_append_str(pinfo->cinfo, COL_INFO, format_text(pinfo->pool, decrypt, a_linelen));
  }
}

static int
dissect_smtp_request(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, proto_tree *smtp_tree, struct smtp_session_state *session_state, struct smtp_proto_data *spd_frame_data, bool first_pdu)
{
  proto_item                *ti, *hidden_item;
  proto_tree                *cmdresp_tree = NULL;
  unsigned                   offset = 0;
  unsigned                   next_offset;
  unsigned                   linelen   = 0;
  int                        length_remaining;
  int                        cmdlen;
  fragment_head             *frag_msg  = NULL;
  tvbuff_t                  *next_tvb;
  char                      *decrypt   = NULL;
  size_t                     decrypt_len  = 0;
  char                      *base64_string   = NULL;

  switch (spd_frame_data->pdu_type) {

  case SMTP_PDU_MESSAGE:
    /* Column Info */
    length_remaining = tvb_reported_length_remaining(tvb, offset);
    if (first_pdu)
        col_append_str(pinfo->cinfo, COL_INFO, "C: ");
    else
        col_append_str(pinfo->cinfo, COL_INFO, " | ");
    col_append_str(pinfo->cinfo, COL_INFO, smtp_data_desegment ? "DATA fragment" : "Message Body");
    col_append_fstr(pinfo->cinfo, COL_INFO, ", %d byte%s", length_remaining,
                      plurality (length_remaining, "", "s"));

    if (smtp_data_desegment) {
      frag_msg = fragment_add_seq_next(&smtp_data_reassembly_table, tvb, 0,
                                       pinfo, spd_frame_data->conversation_id, NULL,
                                       tvb_reported_length(tvb),
                                       spd_frame_data->more_frags);
      if (spd_frame_data->more_frags) {
        /* Show the text lines within this PDU fragment
         * Calling this on the last fragment would interfere with
         * process reassembled data below, by changing the layer number.
         * (We'll display the data anyway as part of the reassembly.)
         */
        call_dissector(data_text_lines_handle, tvb, pinfo, smtp_tree);
      }
    } else {
      /*
       * Message body.
       * Put its lines into the protocol tree, a line at a time.
       */
      dissect_smtp_data(tvb, offset, smtp_tree);
    }
    break;

  case SMTP_PDU_EOM:
    /*
     * End-of-message-body indicator.
     */
    if (first_pdu)
        col_append_str(pinfo->cinfo, COL_INFO, "C: ");
    else
        col_append_str(pinfo->cinfo, COL_INFO, " | ");
    col_append_str(pinfo->cinfo, COL_INFO, ".");

    proto_tree_add_none_format(smtp_tree, hf_smtp_eom, tvb, offset, 3, "C: .");

    break;

  case SMTP_PDU_CMD:
    /*
     * Command.
     */

    while (tvb_offset_exists(tvb, offset)) {
      /*
       * Find the end of the line.
       */
      tvb_find_line_end_remaining(tvb, offset, &linelen, &next_offset);

      /* Column Info */
      if (first_pdu && offset == 0)
          col_append_str(pinfo->cinfo, COL_INFO, "C: ");
      else
          col_append_str(pinfo->cinfo, COL_INFO, " | ");

      hidden_item = proto_tree_add_boolean(smtp_tree, hf_smtp_req, tvb,
                                           0, 0, true);
      proto_item_set_hidden(hidden_item);

      if (session_state->username_frame == pinfo->num) {
        if (decrypt == NULL) {
          /* This line wasn't already decrypted through the state machine */
          decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset, linelen, ENC_ASCII);
          decrypt_len = linelen;
          if (smtp_auth_parameter_decoding_enabled) {
            if (strlen(decrypt) > 1) {
              g_base64_decode_inplace(decrypt, &decrypt_len);
              decrypt[decrypt_len] = 0;
            } else {
              decrypt_len = 0;
            }
            if (decrypt_len == 0) {
              /* Go back to the original string */
              decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset, linelen, ENC_ASCII);
              decrypt_len = linelen;
            }
          }
        }

        if (!session_state->username)
          session_state->username = wmem_strdup(wmem_file_scope(), decrypt);
        proto_tree_add_string(smtp_tree, hf_smtp_username, tvb,
                              offset, linelen, decrypt);
        col_append_fstr(pinfo->cinfo, COL_INFO, "User: %s", format_text(pinfo->pool, decrypt, decrypt_len));
      } else if (session_state->password_frame == pinfo->num) {
        if (decrypt == NULL) {
          /* This line wasn't already decrypted through the state machine */
          decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset, linelen, ENC_ASCII);
          decrypt_len = linelen;
          if (smtp_auth_parameter_decoding_enabled) {
            if (strlen(decrypt) > 1) {
              g_base64_decode_inplace(decrypt, &decrypt_len);
              decrypt[decrypt_len] = 0;
            } else {
              decrypt_len = 0;
            }
            if (decrypt_len == 0) {
              /* Go back to the original string */
              decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset, linelen, ENC_ASCII);
              decrypt_len = linelen;
            }
          }
        }
        proto_tree_add_string(smtp_tree, hf_smtp_password, tvb,
                              offset, linelen, decrypt);
        col_append_fstr(pinfo->cinfo, COL_INFO, "Pass: %s", format_text(pinfo->pool, decrypt, decrypt_len));

        tap_credential_t* auth = wmem_new0(pinfo->pool, tap_credential_t);
        auth->num = pinfo->num;
        auth->username_num = session_state->username_frame;
        auth->password_hf_id = hf_smtp_password;
        auth->username = session_state->username;
        auth->proto = "SMTP";
        auth->info = wmem_strdup_printf(pinfo->pool, "Username in packet %u", auth->username_num);
        tap_queue_packet(credentials_tap, pinfo, auth);
      } else if (session_state->ntlm_rsp_frame == pinfo->num) {
        decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset, linelen, ENC_ASCII);
        decrypt_len = linelen;
        if (smtp_auth_parameter_decoding_enabled) {
          if (strlen(decrypt) > 1) {
            g_base64_decode_inplace(decrypt, &decrypt_len);
            decrypt[decrypt_len] = 0;
          } else {
            decrypt_len = 0;
          }
          if (decrypt_len == 0) {
            /* Go back to the original string */
            decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset, linelen, ENC_ASCII);
            decrypt_len = linelen;
            col_append_str(pinfo->cinfo, COL_INFO, format_text(pinfo->pool, decrypt, linelen));
            proto_tree_add_item(smtp_tree, hf_smtp_command_line, tvb,
                                offset, linelen, ENC_ASCII);
          }
          else {
            base64_string = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset, linelen, ENC_ASCII);
            dissect_ntlm_auth(tvb, pinfo, smtp_tree, base64_string);
          }
        }
        else {
          col_append_str(pinfo->cinfo, COL_INFO, format_text(pinfo->pool, decrypt, linelen));
          proto_tree_add_item(smtp_tree, hf_smtp_command_line, tvb,
                              offset, linelen, ENC_ASCII);
        }
      } else if (session_state->user_pass_frame == pinfo->num) {
        decode_plain_auth(tvb, pinfo, smtp_tree, offset, linelen);
      } else {

        if (linelen >= 4)
          cmdlen = 4;
        else
          cmdlen = linelen;

        /*
         * Put the command line into the protocol tree.
         */
        ti =  proto_tree_add_item(smtp_tree, hf_smtp_command_line, tvb,
                        offset, next_offset - offset, ENC_ASCII);
        cmdresp_tree = proto_item_add_subtree(ti, ett_smtp_cmdresp);

        proto_tree_add_item(cmdresp_tree, hf_smtp_req_command, tvb,
                          offset, cmdlen, ENC_ASCII);

        if ((linelen > 5) && (session_state->username_cmd_frame == pinfo->num) ) {
          proto_tree_add_item(cmdresp_tree, hf_smtp_req_parameter, tvb,
                            offset + 5, linelen - 5, ENC_ASCII);

          if (linelen >= 11) {
            if (decrypt == NULL) {
              /* This line wasn't already decrypted through the state machine */
               decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset + 11, linelen - 11, ENC_ASCII);
               decrypt_len = linelen - 11;
               if (smtp_auth_parameter_decoding_enabled) {
                 if (strlen(decrypt) > 1) {
                   g_base64_decode_inplace(decrypt, &decrypt_len);
                   decrypt[decrypt_len] = 0;
                 } else {
                   decrypt_len = 0;
                 }
                 if (decrypt_len == 0) {
                   /* Go back to the original string */
                   decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset + 11, linelen - 11, ENC_ASCII);
                   decrypt_len = linelen - 11;
                 }
               }
            }
            proto_tree_add_string(cmdresp_tree, hf_smtp_username, tvb, offset + 11, linelen - 11, decrypt);
            col_append_str(pinfo->cinfo, COL_INFO,
                           tvb_format_text(pinfo->pool, tvb, offset, 11));
            col_append_fstr(pinfo->cinfo, COL_INFO, "User: %s", format_text(pinfo->pool, decrypt, decrypt_len));
          }
        }
        else if ((linelen > 5) && (session_state->ntlm_req_frame == pinfo->num) ) {
          proto_tree_add_item(cmdresp_tree, hf_smtp_req_parameter, tvb,
                            offset + 5, linelen - 5, ENC_ASCII);
          if (linelen >= 10) {
            decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset + 10, linelen - 10, ENC_ASCII);
            decrypt_len = linelen - 10;
            if (smtp_auth_parameter_decoding_enabled) {
              if (strlen(decrypt) > 1) {
                g_base64_decode_inplace(decrypt, &decrypt_len);
                decrypt[decrypt_len] = 0;
              } else {
                decrypt_len = 0;
              }
              if (decrypt_len == 0) {
                /* Go back to the original string */
                decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset + 10, linelen - 10, ENC_ASCII);
                decrypt_len = linelen - 10;
                col_append_str(pinfo->cinfo, COL_INFO,
                               tvb_format_text(pinfo->pool, tvb, offset, 10));
                col_append_str(pinfo->cinfo, COL_INFO, format_text(pinfo->pool, decrypt, linelen - 10));
              }
              else {
                base64_string = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset + 10, linelen - 10, ENC_ASCII);
                col_append_str(pinfo->cinfo, COL_INFO,
                               tvb_format_text(pinfo->pool, tvb, offset, 10));
                dissect_ntlm_auth(tvb, pinfo, cmdresp_tree, format_text(pinfo->pool, base64_string, linelen - 10));
              }
            }
            else {
              col_append_str(pinfo->cinfo, COL_INFO,
                             tvb_format_text(pinfo->pool, tvb, offset, 10));
              col_append_str(pinfo->cinfo, COL_INFO, format_text(pinfo->pool, decrypt, linelen - 10));
            }
          }
        }
        else if ((linelen > 5) && (session_state->user_pass_cmd_frame == pinfo->num) ) {
          proto_tree_add_item(cmdresp_tree, hf_smtp_req_parameter, tvb,
                            offset + 5, linelen - 5, ENC_ASCII);
          col_append_str(pinfo->cinfo, COL_INFO,
                         tvb_format_text(pinfo->pool, tvb, offset, 11));
          decode_plain_auth(tvb, pinfo, cmdresp_tree, offset + 11, linelen - 11);
        }
        else if (linelen > 5) {
          proto_tree_add_item(cmdresp_tree, hf_smtp_req_parameter, tvb,
                            offset + 5, linelen - 5, ENC_ASCII);
          col_append_str(pinfo->cinfo, COL_INFO,
                         tvb_format_text(pinfo->pool, tvb, offset, linelen));
        }
        else {
          col_append_str(pinfo->cinfo, COL_INFO,
                         tvb_format_text(pinfo->pool, tvb, offset, linelen));
        }

        if (smtp_data_desegment && !spd_frame_data->more_frags) {
          /* terminate the desegmentation */
          frag_msg = fragment_end_seq_next(&smtp_data_reassembly_table,
                                           pinfo, spd_frame_data->conversation_id, NULL);
        }
      }
      /*
       * Step past this line.
       */
      offset = next_offset;
    }
  }

  if (smtp_data_desegment && (spd_frame_data->pdu_type == SMTP_PDU_MESSAGE || spd_frame_data->more_frags == false) ) {
    /* XXX: fragment_add_seq_next() only supports one PDU with a given ID
     * being completed in a frame.
     *
     * RFCs 2920 and 3030 imply that even with pipelining, a frame only
     * contains one message that ends, as the client needs to handle
     * responses. If it does happen, we need to track message numbers within
     * the conversation and use those as part of the frag ID.
     */
    next_tvb = process_reassembled_data(tvb, offset, pinfo, "Reassembled SMTP",
                                        frag_msg, &smtp_data_frag_items, NULL, smtp_tree);
    if (next_tvb) {
      /* XXX: this is presumptuous - we may have negotiated something else */
      if (imf_handle) {
        call_dissector(imf_handle, next_tvb, pinfo, tree);
      } else {
        /*
         * Message body.
         * Put its lines into the protocol tree, a line at a time.
         */
        dissect_smtp_data(tvb, offset, smtp_tree);
      }

      pinfo->fragmented = false;
    } else {
      pinfo->fragmented = true;
    }
  }
  return tvb_captured_length(tvb);
}

static int
dissect_smtp_response(tvbuff_t *tvb, packet_info *pinfo, proto_tree *smtp_tree, struct smtp_session_state *session_state)
{
  proto_item                *ti, *hidden_item;
  proto_tree                *cmdresp_tree = NULL;
  unsigned                   offset = 0;
  unsigned                   next_offset;
  unsigned                   linelen   = 0;
  uint32_t                   code;
  uint8_t                    line_code[3];
  char                      *decrypt   = NULL;
  size_t                     decrypt_len  = 0;
  char                      *base64_string   = NULL;

  /*
   * Process the response, a line at a time, until we hit a line
   * that doesn't have a continuation indication on it.
   */
  hidden_item = proto_tree_add_boolean(smtp_tree, hf_smtp_rsp, tvb, 0, 0, true);
  proto_item_set_hidden(hidden_item);

  //Multiline information
  smtp_multiline_state_t multiline_state = SMTP_MULTILINE_NONE;
  uint32_t multiline_code = 0;
  proto_item* code_item = NULL;

  while (tvb_offset_exists(tvb, offset)) {
    /*
     * Find the end of the line.
     */
    tvb_find_line_end_remaining(tvb, offset, &linelen, &next_offset);

    if (offset == 0)
        col_append_str(pinfo->cinfo, COL_INFO, "S: ");
    else
        col_append_str(pinfo->cinfo, COL_INFO, " | ");

    if (linelen >= 3) {
        line_code[0] = tvb_get_uint8(tvb, offset);
        line_code[1] = tvb_get_uint8(tvb, offset+1);
        line_code[2] = tvb_get_uint8(tvb, offset+2);
        if (g_ascii_isdigit(line_code[0]) && g_ascii_isdigit(line_code[1])
            && g_ascii_isdigit(line_code[2])) {
          /*
           * We have a 3-digit response code.
           */
          code = (line_code[0] - '0')*100 + (line_code[1] - '0')*10 + (line_code[2] - '0');
          if ((linelen > 3) && (tvb_get_uint8(tvb, offset + 3) == '-')) {
            if (multiline_state == SMTP_MULTILINE_NONE) {
              multiline_state = SMTP_MULTILINE_START;
              multiline_code = code;
            } else {
              multiline_state = SMTP_MULTILINE_CONTINUE;
            }
          } else if ((multiline_state == SMTP_MULTILINE_START) || (multiline_state == SMTP_MULTILINE_CONTINUE)) {
            multiline_state = SMTP_MULTILINE_END;
          }

          /*
           * If we're awaiting the response to a STARTTLS code, this
           * is it - if it's 220, all subsequent traffic will
           * be TLS, otherwise we're back to boring old SMTP.
           */
          if (session_state->smtp_state == SMTP_STATE_AWAITING_STARTTLS_RESPONSE) {
            if (code == 220) {
              /* This is the last non-TLS frame. */
              ssl_starttls_ack(tls_handle, pinfo, smtp_handle);
            }
            session_state->smtp_state =  SMTP_STATE_READING_CMDS;
          }

          if (code == 334) {
              switch(session_state->auth_state)
              {
              case SMTP_AUTH_STATE_START:
                  session_state->auth_state = SMTP_AUTH_STATE_USERNAME_REQ;
                  break;
              case SMTP_AUTH_STATE_USERNAME_RSP:
                  session_state->auth_state = SMTP_AUTH_STATE_PASSWORD_REQ;
                  break;
              case SMTP_AUTH_STATE_PLAIN_REQ:
                  session_state->auth_state = SMTP_AUTH_STATE_PLAIN_RSP;
                  break;
              case SMTP_AUTH_STATE_PLAIN_START_REQ:
                  session_state->auth_state = SMTP_AUTH_STATE_PLAIN_REQ;
                  break;
              case SMTP_AUTH_STATE_NTLM_REQ:
                  session_state->auth_state = SMTP_AUTH_STATE_NTLM_CHALLANGE;
                  break;
              case SMTP_AUTH_STATE_NONE:
              case SMTP_AUTH_STATE_USERNAME_REQ:
              case SMTP_AUTH_STATE_PASSWORD_REQ:
              case SMTP_AUTH_STATE_PASSWORD_RSP:
              case SMTP_AUTH_STATE_PLAIN_RSP:
              case SMTP_AUTH_STATE_PLAIN_CRED_REQ:
              case SMTP_AUTH_STATE_NTLM_RSP:
              case SMTP_AUTH_STATE_NTLM_CHALLANGE:
              case SMTP_AUTH_STATE_SUCCESS:
              case SMTP_AUTH_STATE_FAILED:
                  /* ignore */
                  break;
              }
          } else if ((session_state->auth_state == SMTP_AUTH_STATE_PASSWORD_RSP) ||
                     ( session_state->auth_state == SMTP_AUTH_STATE_PLAIN_RSP) ||
                     ( session_state->auth_state == SMTP_AUTH_STATE_NTLM_RSP) ||
                     ( session_state->auth_state == SMTP_AUTH_STATE_PLAIN_CRED_REQ) ) {
              if (code == 235) {
                session_state->auth_state = SMTP_AUTH_STATE_SUCCESS;
              } else {
                session_state->auth_state = SMTP_AUTH_STATE_FAILED;
              }
              session_state->last_auth_frame = pinfo->num;
          }

          /*
           * Put the response code and parameters into the protocol tree.
           * Only create a new response tree when not in the middle of multiline response.
           */
          if ((multiline_state != SMTP_MULTILINE_CONTINUE) &&
              (multiline_state != SMTP_MULTILINE_END))
          {
            ti = proto_tree_add_item(smtp_tree, hf_smtp_response, tvb,
              offset, next_offset - offset, ENC_ASCII);
            cmdresp_tree = proto_item_add_subtree(ti, ett_smtp_cmdresp);

            code_item = proto_tree_add_uint(cmdresp_tree, hf_smtp_rsp_code, tvb, offset, 3, code);
          } else if (multiline_code != code) {
            expert_add_info_format(pinfo, code_item, &ei_smtp_rsp_code, "Unexpected response code %u in multiline response. Expected %u", code, multiline_code);
          }

          decrypt = NULL;
          if (linelen >= 4) {
              if ((smtp_auth_parameter_decoding_enabled) && (code == 334)) {
                  decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset + 4, linelen - 4, ENC_ASCII);
                  if (strlen(decrypt) > 1 && (g_base64_decode_inplace(decrypt, &decrypt_len)) && decrypt_len > 0) {
                    decrypt[decrypt_len] = 0;
                    if (g_ascii_strncasecmp(decrypt, "NTLMSSP", 7) == 0) {
                      base64_string = (char*)tvb_get_string_enc(pinfo->pool, tvb, offset + 4, linelen - 4, ENC_ASCII);
                      col_append_fstr(pinfo->cinfo, COL_INFO, "%d ", code);
                      proto_tree_add_string(cmdresp_tree, hf_smtp_rsp_parameter, tvb,
                                        offset + 4, linelen - 4, base64_string);
                      dissect_ntlm_auth(tvb, pinfo, cmdresp_tree, base64_string);
                    }
                    else {
                      proto_tree_add_string(cmdresp_tree, hf_smtp_rsp_parameter, tvb,
                                        offset + 4, linelen - 4, decrypt);

                      col_append_fstr(pinfo->cinfo, COL_INFO, "%d %s", code, format_text(pinfo->pool, decrypt, decrypt_len));
                    }
                  } else {
                    decrypt = NULL;
                  }
              }

              if (decrypt == NULL) {
                  proto_tree_add_item(cmdresp_tree, hf_smtp_rsp_parameter, tvb,
                                    offset + 4, linelen - 4, ENC_ASCII);

                  if ((multiline_state != SMTP_MULTILINE_CONTINUE) &&
                      (multiline_state != SMTP_MULTILINE_END)) {
                    col_append_str(pinfo->cinfo, COL_INFO,
                                  tvb_format_text(pinfo->pool, tvb, offset, linelen));
                  } else {
                    col_append_str(pinfo->cinfo, COL_INFO,
                      tvb_format_text(pinfo->pool, tvb, offset+4, linelen-4));
                  }
              }
          } else {
             col_append_str(pinfo->cinfo, COL_INFO,
                            tvb_format_text(pinfo->pool, tvb, offset, linelen));
          }
        }

        //Clear multiline state if this is the last line
        if (multiline_state == SMTP_MULTILINE_END)
          multiline_state = SMTP_MULTILINE_NONE;
    }
    /*
     * Step past this line.
     */
    offset = next_offset;

  }
  return offset;
}

static int
dissect_smtp(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void* data _U_)
{
  struct smtp_proto_data    *spd_frame_data;
  proto_tree                *smtp_tree = NULL;
  proto_item                *ti;
  unsigned                   offset    = 0;
  int                        request   = 0;
  conversation_t            *conversation;
  struct smtp_session_state *session_state;
  const char                *line;
  unsigned                   linelen   = 0;
  bool                       eom_seen  = false;
  unsigned                   next_offset;
  unsigned                   loffset   = 0;
  int                        cmdlen;
  char                      *decrypt   = NULL;
  size_t                     decrypt_len  = 0;

  /* As there is no guarantee that we will only see frames in the
   * the SMTP conversation once, and that we will see them in
   * order - in Wireshark, the user could randomly click on frames
   * in the conversation in any order in which they choose - we
   * have to store information with each frame indicating whether
   * it contains commands or data or an EOM indication.
   *
   * XXX - what about frames that contain *both*?  TCP is a
   * byte-stream protocol, and there are no guarantees that
   * TCP segment boundaries will correspond to SMTP commands
   * or EOM indications.
   *
   * We only need that for the client->server stream; responses
   * are easy to manage.
   *
   * If we have per frame data, use that, else, we must be on the first
   * pass, so we figure it out on the first pass.
   */

  /*
   * Find or create the conversation for this.
   */
  conversation = find_or_create_conversation(pinfo);

  /*
   * Is there a request structure attached to this conversation?
   */
  session_state = (struct smtp_session_state *)conversation_get_proto_data(conversation, proto_smtp);
  if (!session_state) {
    /*
     * No - create one and attach it.
     */
    session_state                    = wmem_new0(wmem_file_scope(), struct smtp_session_state);
    session_state->smtp_state        = SMTP_STATE_START;
    session_state->auth_state        = SMTP_AUTH_STATE_NONE;
    session_state->msg_last          = true;

    conversation_add_proto_data(conversation, proto_smtp, session_state);
  }

  /* Is this a request or a response? */
  request = pinfo->destport == pinfo->match_uint;

  /*
   * Is there any data attached to this frame?
   */
  spd_frame_data = (struct smtp_proto_data *)p_get_proto_data(wmem_file_scope(), pinfo, proto_smtp, 0);

  if (!spd_frame_data) {

    /*
     * No frame data.
     */
    if (request) {

      /*
       * Create a frame data structure and attach it to the packet.
       */
      spd_frame_data = wmem_new0(wmem_file_scope(), struct smtp_proto_data);

      spd_frame_data->conversation_id = conversation->conv_index;
      spd_frame_data->more_frags = true;
      spd_frame_data->end_offset = tvb_reported_length(tvb);

      p_add_proto_data(wmem_file_scope(), pinfo, proto_smtp, 0, spd_frame_data);

    }

    /*
     * Get the first line from the buffer.
     *
     * Note that "tvb_find_line_end_remaining()" will, if it doesn't find a
     * line ending, set linelen to a value that is no longer than what's in
     * the buffer, so the "tvb_get_string_enc()" call won't throw an exception.
     */
    loffset = offset;
    while (tvb_offset_exists(tvb, loffset)) {
      if (!tvb_find_line_end_remaining(tvb, loffset, &linelen, &next_offset)) {
        /* We didn't find a line ending. */
        if (smtp_desegment && pinfo->can_desegment) {
          /*
           * We didn't find a line ending, and we're doing desegmentation;
           * tell the TCP dissector where the data for this message starts
           * in the data it handed us, and tell it we need more bytes.
           */
          pinfo->desegment_offset = loffset;
          pinfo->desegment_len = DESEGMENT_ONE_MORE_SEGMENT;
          return tvb_captured_length(tvb);
        }
      }

      /*
       * Check whether or not this packet is an end of message packet
       * We should look for CRLF.CRLF and they may be split.
       * We have to keep in mind that we may see what we want on
       * two passes through here ...
       */
      if (request) {
        /*
         * The order of these is important ... We want to avoid
         * cases where there is a CRLF at the end of a packet and a
         * .CRLF at the beginning of the same packet.
         */
        if (session_state->crlf_seen && tvb_strneql(tvb, loffset, ".\r\n", 3) == 0)
          eom_seen = true;

        if (tvb_strneql(tvb, next_offset-2, "\r\n", 2) == 0) {
          session_state->crlf_seen = true;
        } else {
          session_state->crlf_seen = false;
        }
      }

      /*
       * OK, Check if we have seen a DATA request. We do it here for
       * simplicity, but we have to be careful below.
       */
      if (request) {
        if (session_state->smtp_state == SMTP_STATE_READING_DATA) {
          /*
           * This is message data.
           */
          if (eom_seen) { /* Seen the EOM */
            /*
             * EOM.
             * Everything that comes before it is a message.
             * Everything that comes after it is commands.
             */
            spd_frame_data->pdu_type = SMTP_PDU_MESSAGE;
            spd_frame_data->more_frags = false;
            spd_frame_data->end_offset = loffset;

            spd_frame_data = append_pdu(spd_frame_data);
            spd_frame_data->pdu_type = SMTP_PDU_EOM;
            spd_frame_data->end_offset = next_offset;

            spd_frame_data = append_pdu(spd_frame_data);
            spd_frame_data->end_offset = tvb_reported_length(tvb);

            session_state->smtp_state = SMTP_STATE_READING_CMDS;
          } else {
            /*
             * Message data with no EOM.
             */
            spd_frame_data->pdu_type = SMTP_PDU_MESSAGE;

            if (session_state->msg_tot_len > 0) {
              /*
               * We are handling a BDAT message.
               * Check if we have reached end of the data chunk.
               */

              uint32_t msg_len = MIN((uint32_t)tvb_reported_length_remaining(tvb, loffset), (session_state->msg_tot_len - session_state->msg_read_len));
              session_state->msg_read_len += msg_len;
              /*
               * Since we're grabbing the rest of the packet or the data chunk,
               * update the offset accordingly.
               */
              next_offset = loffset + msg_len;
              spd_frame_data->end_offset = next_offset;

              if (session_state->msg_read_len == session_state->msg_tot_len) {
                /*
                 * We have reached end of BDAT data chunk.
                 * Everything that comes after this is commands.
                 */

                if (session_state->msg_last) {
                  /*
                   * We have found the LAST data chunk.
                   * The message can now be reassembled.
                   */
                  spd_frame_data->more_frags = false;
                }

                spd_frame_data = append_pdu(spd_frame_data);
                spd_frame_data->end_offset = tvb_reported_length(tvb);

                session_state->smtp_state = SMTP_STATE_READING_CMDS;
              }
            }
          }
        } else {
          /*
           * This is commands - unless the capture started in the
           * middle of a session, and we're in the middle of data.
           *
           * Commands are not necessarily 4 characters; look
           * for a space or the end of the line to see where
           * the putative command ends.
           */
          line = (char*)tvb_get_string_enc(pinfo->pool, tvb, loffset, linelen, ENC_ASCII);
          if ((session_state->auth_state != SMTP_AUTH_STATE_NONE) &&
              (pinfo->num >= session_state->first_auth_frame) &&
              ((session_state->last_auth_frame == 0) || (pinfo->num <= session_state->last_auth_frame))) {
            decrypt = (char*)tvb_get_string_enc(pinfo->pool, tvb, loffset, linelen, ENC_ASCII);
            if ((smtp_auth_parameter_decoding_enabled) &&
                (strlen(decrypt) > 1) &&
                (g_base64_decode_inplace(decrypt, &decrypt_len)) &&
                (decrypt_len > 0)) {
              decrypt[decrypt_len] = 0;
              line = decrypt;
              linelen = (int)decrypt_len;
            } else {
              decrypt_len = linelen;
            }
          }

          cmdlen = (int)strcspn(line, " ");
          if (line_is_smtp_command(line, cmdlen) &&
               ( session_state->auth_state != SMTP_AUTH_STATE_PASSWORD_REQ )) {
            if (g_ascii_strncasecmp(line, "DATA", 4) == 0) {
              /*
               * DATA command.
               * This is a command, but everything that comes after it,
               * until an EOM, is data.
               */
              spd_frame_data->pdu_type = SMTP_PDU_CMD;
              session_state->smtp_state = SMTP_STATE_READING_DATA;
              session_state->data_seen = true;
            } else if ((linelen > 5) && (g_ascii_strncasecmp(line, "BDAT", 4) == 0)) {
              /*
               * BDAT command.
               * This is a command, but everything that comes after it,
               * until given length is received, is data.
               */
              uint32_t msg_len;

              msg_len = (uint32_t)strtoul (line+5, NULL, 10);

              spd_frame_data->pdu_type = SMTP_PDU_CMD;

              session_state->data_seen = true;
              session_state->msg_tot_len += msg_len;

              if (g_ascii_strncasecmp(line+linelen-4, "LAST", 4) == 0) {
                /*
                 * This is the last data chunk.
                 */
                session_state->msg_last = true;

                if (msg_len == 0) {
                  /*
                   * No more data to expect.
                   * The message can now be reassembled.
                   */
                  spd_frame_data->more_frags = false;
                }
              } else {
                session_state->msg_last = false;
              }

              if (msg_len == 0) {
                /* No data to read, next will be another command */
                session_state->smtp_state = SMTP_STATE_READING_CMDS;
              } else {
                session_state->smtp_state = SMTP_STATE_READING_DATA;
                spd_frame_data->end_offset = next_offset;

                spd_frame_data = append_pdu(spd_frame_data);
                spd_frame_data->end_offset = tvb_reported_length(tvb);
              }
            } else if (g_ascii_strncasecmp(line, "RSET", 4) == 0) {
              /*
               * RSET command.
               * According to RFC 3030, the RSET command clears all BDAT
               * segments and resets the transaction. It is possible to
               * use DATA and BDAT in the same session, so long as they
               * are not mixed in the same transaction.
               */
              spd_frame_data->pdu_type = SMTP_PDU_CMD;
              session_state->msg_last = true;
              session_state->msg_tot_len = 0;
              session_state->msg_read_len = 0;
            } else if ((g_ascii_strncasecmp(line, "AUTH LOGIN", 10) == 0) && (linelen <= 11)) {
              /*
               * AUTH LOGIN command.
               * Username is in a separate frame
               */
              spd_frame_data->pdu_type        = SMTP_PDU_CMD;
              session_state->smtp_state       = SMTP_STATE_READING_CMDS;
              session_state->auth_state       = SMTP_AUTH_STATE_START;
              session_state->first_auth_frame = pinfo->num;
            } else if ((g_ascii_strncasecmp(line, "AUTH LOGIN", 10) == 0) && (linelen > 11)) {
              /*
               * AUTH LOGIN command.
               * Username follows the 'AUTH LOGIN' string
               */
              spd_frame_data->pdu_type        = SMTP_PDU_CMD;
              session_state->smtp_state       = SMTP_STATE_READING_CMDS;
              session_state->auth_state       = SMTP_AUTH_STATE_USERNAME_RSP;
              session_state->first_auth_frame = pinfo->num;
              session_state->username_cmd_frame = pinfo->num;
            } else if ((g_ascii_strncasecmp(line, "AUTH PLAIN", 10) == 0) && (linelen <= 11)) {
              /*
               * AUTH PLAIN command.
               * Username and Password is in one separate frame
               */
              spd_frame_data->pdu_type        = SMTP_PDU_CMD;
              session_state->smtp_state       = SMTP_STATE_READING_CMDS;
              session_state->auth_state       = SMTP_AUTH_STATE_PLAIN_START_REQ;
              session_state->first_auth_frame = pinfo->num;
            } else if ((g_ascii_strncasecmp(line, "AUTH PLAIN", 10) == 0) && (linelen > 11)) {
              /*
               * AUTH PLAIN command.
               * Username and Password follows the 'AUTH PLAIN' string
               */
              spd_frame_data->pdu_type        = SMTP_PDU_CMD;
              session_state->smtp_state       = SMTP_STATE_READING_CMDS;
              session_state->auth_state       = SMTP_AUTH_STATE_PLAIN_CRED_REQ;
              session_state->first_auth_frame = pinfo->num;
              session_state->user_pass_cmd_frame = pinfo->num;
            } else if ((g_ascii_strncasecmp(line, "AUTH NTLM", 9) == 0) && (linelen > 10)) {
              /*
               * AUTH NTLM command with nlmssp request
               */
              spd_frame_data->pdu_type        = SMTP_PDU_CMD;
              session_state->smtp_state       = SMTP_STATE_READING_CMDS;
              session_state->auth_state       = SMTP_AUTH_STATE_NTLM_REQ;
              session_state->ntlm_req_frame = pinfo->num;
            } else if (g_ascii_strncasecmp(line, "STARTTLS", 8) == 0) {
              /*
               * STARTTLS command.
               * This is a command, but if the response is 220,
               * everything after the response is TLS.
               */
              session_state->smtp_state = SMTP_STATE_AWAITING_STARTTLS_RESPONSE;
              spd_frame_data->pdu_type = SMTP_PDU_CMD;
            } else {
              /*
               * Regular command.
               */
              spd_frame_data->pdu_type = SMTP_PDU_CMD;
            }
          } else if (session_state->auth_state == SMTP_AUTH_STATE_USERNAME_REQ) {
              session_state->auth_state = SMTP_AUTH_STATE_USERNAME_RSP;
              session_state->username_frame = pinfo->num;
          } else if (session_state->auth_state == SMTP_AUTH_STATE_PASSWORD_REQ) {
              session_state->auth_state = SMTP_AUTH_STATE_PASSWORD_RSP;
              session_state->password_frame = pinfo->num;
          } else if (session_state->auth_state == SMTP_AUTH_STATE_PLAIN_REQ) {
              session_state->auth_state = SMTP_AUTH_STATE_PLAIN_RSP;
              session_state->user_pass_frame = pinfo->num;
          } else if (session_state->auth_state == SMTP_AUTH_STATE_NTLM_CHALLANGE) {
              session_state->auth_state = SMTP_AUTH_STATE_NTLM_RSP;
              session_state->ntlm_rsp_frame = pinfo->num;
          }
          else {

            /*
             * Assume it's message data.
             */
            spd_frame_data->pdu_type = (session_state->data_seen || (session_state->smtp_state == SMTP_STATE_START)) ? SMTP_PDU_MESSAGE : SMTP_PDU_CMD;
          }
        }
      }

      /*
       * Step past this line.
       */
      loffset = next_offset;
    }
  }


  /*
   * From here, we simply add items to the tree and info to the info
   * fields ...
   */

  col_set_str(pinfo->cinfo, COL_PROTOCOL, "SMTP");
  col_clear(pinfo->cinfo, COL_INFO);

  ti = proto_tree_add_item(tree, proto_smtp, tvb, offset, -1, ENC_NA);
  smtp_tree = proto_item_add_subtree(ti, ett_smtp);

  if (request) {
    /*
     * Check out whether or not we can see a command in there ...
     * What we are looking for is not data_seen and the word DATA
     * and not eom_seen.
     *
     * We will see DATA and session_state->data_seen when we process the
     * tree view after we have seen a DATA packet when processing
     * the packet list pane.
     *
     * On the first pass, we will not have any info on the packets
     * On second and subsequent passes, we will.
     */
    spd_frame_data = (struct smtp_proto_data *)p_get_proto_data(wmem_file_scope(), pinfo, proto_smtp, 0);
    offset = 0;
    while (spd_frame_data != NULL && tvb_reported_length_remaining(tvb, offset)) {
      DISSECTOR_ASSERT_CMPINT(offset, <=, spd_frame_data->end_offset);
      dissect_smtp_request(tvb_new_subset_length(tvb, offset, spd_frame_data->end_offset - offset), pinfo, tree, smtp_tree, session_state, spd_frame_data, (offset == 0));
      offset = spd_frame_data->end_offset;
      spd_frame_data = spd_frame_data->next;
    }
  } else {
    dissect_smtp_response(tvb, pinfo, smtp_tree, session_state);
  }

  return tvb_captured_length(tvb);
}


/* Register all the bits needed by the filtering engine */

void
proto_register_smtp(void)
{
  static hf_register_info hf[] = {
    { &hf_smtp_req,
      { "Request", "smtp.req",
        FT_BOOLEAN, BASE_NONE, NULL, 0x0, NULL, HFILL }},

    { &hf_smtp_rsp,
      { "Response", "smtp.rsp",
        FT_BOOLEAN, BASE_NONE, NULL, 0x0, NULL, HFILL }},

    { &hf_smtp_message,
      { "Message", "smtp.message",
        FT_STRING,  BASE_NONE, NULL, 0x0, NULL, HFILL }},

    { &hf_smtp_command_line,
      { "Command Line", "smtp.command_line",
        FT_STRING,  BASE_NONE, NULL, 0x0, NULL, HFILL }},

    { &hf_smtp_req_command,
      { "Command", "smtp.req.command",
        FT_STRING,  BASE_NONE, NULL, 0x0, NULL, HFILL }},

    { &hf_smtp_req_parameter,
      { "Request parameter", "smtp.req.parameter",
        FT_STRING, BASE_NONE, NULL, 0x0, NULL, HFILL }},

    { &hf_smtp_response,
      { "Response", "smtp.response",
        FT_STRING,  BASE_NONE, NULL, 0x0, NULL, HFILL }},

    { &hf_smtp_rsp_code,
      { "Response code", "smtp.response.code",
        FT_UINT32, BASE_DEC|BASE_EXT_STRING, &response_codes_vs_ext, 0x0, NULL, HFILL }},

    { &hf_smtp_rsp_parameter,
      { "Response parameter", "smtp.rsp.parameter",
        FT_STRING, BASE_NONE, NULL, 0x0, NULL, HFILL }},

    { &hf_smtp_username,
      { "Username", "smtp.auth.username",
        FT_STRING, BASE_NONE, NULL, 0x0, NULL, HFILL }},

    { &hf_smtp_password,
      { "Password", "smtp.auth.password",
        FT_STRING, BASE_NONE, NULL, 0x0, NULL, HFILL }},

    { &hf_smtp_username_password,
      { "Username/Password", "smtp.auth.username_password",
        FT_STRING, BASE_NONE, NULL, 0x0, NULL, HFILL }},

    { &hf_smtp_eom,
      { "EOM", "smtp.eom",
        FT_NONE, BASE_NONE, NULL, 0x00, NULL, HFILL } },

    /* Fragment entries */
    { &hf_smtp_data_fragments,
      { "DATA fragments", "smtp.data.fragments",
        FT_NONE, BASE_NONE, NULL, 0x00, "Message fragments", HFILL } },

    { &hf_smtp_data_fragment,
      { "DATA fragment", "smtp.data.fragment",
        FT_FRAMENUM, BASE_NONE, NULL, 0x00, "Message fragment", HFILL } },

    { &hf_smtp_data_fragment_overlap,
      { "DATA fragment overlap", "smtp.data.fragment.overlap", FT_BOOLEAN,
        BASE_NONE, NULL, 0x0, "Message fragment overlap", HFILL } },

    { &hf_smtp_data_fragment_overlap_conflicts,
      { "DATA fragment overlapping with conflicting data",
        "smtp.data.fragment.overlap.conflicts", FT_BOOLEAN, BASE_NONE, NULL,
        0x0, "Message fragment overlapping with conflicting data", HFILL } },

    { &hf_smtp_data_fragment_multiple_tails,
      { "DATA has multiple tail fragments", "smtp.data.fragment.multiple_tails",
        FT_BOOLEAN, BASE_NONE, NULL, 0x0, "Message has multiple tail fragments", HFILL } },

    { &hf_smtp_data_fragment_too_long_fragment,
      { "DATA fragment too long", "smtp.data.fragment.too_long_fragment",
        FT_BOOLEAN, BASE_NONE, NULL, 0x0, "Message fragment too long", HFILL } },

    { &hf_smtp_data_fragment_error,
      { "DATA defragmentation error", "smtp.data.fragment.error",
        FT_FRAMENUM, BASE_NONE, NULL, 0x00, "Message defragmentation error", HFILL } },

    { &hf_smtp_data_fragment_count,
      { "DATA fragment count", "smtp.data.fragment.count",
        FT_UINT32, BASE_DEC, NULL, 0x00, NULL, HFILL } },

    { &hf_smtp_data_reassembled_in,
      { "Reassembled DATA in frame", "smtp.data.reassembled.in",
        FT_FRAMENUM, BASE_NONE, NULL, 0x00, "This DATA fragment is reassembled in this frame", HFILL } },

    { &hf_smtp_data_reassembled_length,
      { "Reassembled DATA length", "smtp.data.reassembled.length",
        FT_UINT32, BASE_DEC, NULL, 0x00, "The total length of the reassembled payload", HFILL } },
  };
  static int *ett[] = {
    &ett_smtp,
    &ett_smtp_cmdresp,
    &ett_smtp_data_fragment,
    &ett_smtp_data_fragments,

  };

  static ei_register_info ei[] = {
    { &ei_smtp_base64_decode, { "smtp.base64_decode", PI_PROTOCOL, PI_WARN, "base64 decode failed or is not enabled (check SMTP preferences)", EXPFILL }},
    { &ei_smtp_rsp_code,{ "smtp.response.code.unexpected", PI_PROTOCOL, PI_WARN, "Unexpected response code in multiline response", EXPFILL } },
  };

  module_t *smtp_module;
  expert_module_t* expert_smtp;

  proto_smtp = proto_register_protocol("Simple Mail Transfer Protocol",
                                       "SMTP", "smtp");

  proto_register_field_array(proto_smtp, hf, array_length(hf));
  proto_register_subtree_array(ett, array_length(ett));
  expert_smtp = expert_register_protocol(proto_smtp);
  expert_register_field_array(expert_smtp, ei, array_length(ei));
  reassembly_table_register(&smtp_data_reassembly_table,
                        &addresses_ports_reassembly_table_functions);

  /* Allow dissector to find be found by name. */
  smtp_handle = register_dissector("smtp", dissect_smtp, proto_smtp);

  /* Preferences */
  smtp_module = prefs_register_protocol(proto_smtp, NULL);
  prefs_register_bool_preference(smtp_module, "desegment_lines",
                                 "Reassemble SMTP command and response lines spanning multiple TCP segments",
                                 "Whether the SMTP dissector should reassemble command and response lines"
                                 " spanning multiple TCP segments. To use this option, you must also enable "
                                 "\"Allow subdissectors to reassemble TCP streams\" in the TCP protocol settings.",
                                 &smtp_desegment);

  prefs_register_bool_preference(smtp_module, "desegment_data",
                                 "Reassemble SMTP DATA commands spanning multiple TCP segments",
                                 "Whether the SMTP dissector should reassemble DATA command and lines"
                                 " spanning multiple TCP segments. To use this option, you must also enable "
                                 "\"Allow subdissectors to reassemble TCP streams\" in the TCP protocol settings.",
                                 &smtp_data_desegment);

  prefs_register_bool_preference(smtp_module, "decryption",
                                 "Decode Base64 encoded AUTH parameters",
                                 "Whether the SMTP dissector should decode Base64 encoded AUTH parameters",
                                 &smtp_auth_parameter_decoding_enabled);

  credentials_tap = register_tap("credentials"); /* credentials tap */
}

/* The registration hand-off routine */
void
proto_reg_handoff_smtp(void)
{
  dissector_add_uint_range_with_preference("tcp.port", TCP_PORT_SMTP, smtp_handle);
  ssl_dissector_add(TCP_PORT_SSL_SMTP, smtp_handle);
  /* No "auto" preference since handle is shared with SMTP */
  dissector_add_uint("tcp.port", TCP_PORT_SUBMISSION, smtp_handle);

  /* find the IMF dissector */
  imf_handle = find_dissector_add_dependency("imf", proto_smtp);

  /* find the TLS dissector */
  tls_handle = find_dissector_add_dependency("tls", proto_smtp);

  /* find the NTLM dissector */
  ntlmssp_handle = find_dissector_add_dependency("ntlmssp", proto_smtp);

  /* find the data-text-lines dissector */
  data_text_lines_handle = find_dissector_add_dependency("data-text-lines", proto_smtp);
}

/*
 * Editor modelines  -  https://www.wireshark.org/tools/modelines.html
 *
 * Local variables:
 * c-basic-offset: 2
 * tab-width: 8
 * indent-tabs-mode: nil
 * End:
 *
 * vi: set shiftwidth=2 tabstop=8 expandtab:
 * :indentSize=2:tabSize=8:noTabs=true
 */

Coverage Report

Created: 2026-09-28 06:52