Discovering a snapped or frayed cable on your pop up camper is rarely the dramatic emergency it first appears to be. While the jack mechanism is central to the camping experience, a broken cable is more an inconvenience than a complete catastrophe, provided you approach the problem with a methodical mindset. This guide provides a step-by-step process for safely and effectively raising your shelter when the primary lifting system has failed you.

Understanding the Jack System and the Point of Failure

Most modern pop up campers utilize a complex network of springs, cables, and levers to balance weight and make the manual raising process manageable. When you operate the hand crank, you are typically turning a shaft that tightens a cable, which pulls the telescoping sections together. If you hear a snap or notice excessive slack, the cable has likely broken or jumped its groove. Before attempting a fix, inspect the specific nature of the damage; sometimes the cable is merely dislodged, while other times it requires complete replacement.
Safety First: Securing the Jack Assembly

Never assume the camper is stable just because it is partially standing. A broken cable means the structure relies solely on friction and gravity, making it prone to sudden collapse. Prior to touching the jack, ensure the camper is on level ground and the wheel chocks are in place. Engage the parking brake if the vehicle is attached, and if possible, place wheel chocks against the tires on the opposite side of the jack to prevent rolling during manipulation.
- Visually inspect the cable drum for signs of fraying or corrosion.
- Wear gloves to protect your hands from sharp wire edges.
- Ensure bystanders, especially children, stand clear of the lifting zone.

Manual Override: The Scissor Jack Method
When the primary cable is broken, the most common workaround involves utilizing the secondary scissor jack integrated into the tongue of the camper. This robust hydraulic unit is designed to support the weight of the structure during transport and is usually independent of the cable system. Locate the scissor jack, often positioned near the front of the trailer frame, and begin raising the camper chassis just high enough to take the weight off the main failing jack.
Once the scissor jack is bearing the load, you can safely work on the primary jack mechanism. With the weight transferred, you might find that the broken cable no longer creates resistance, allowing you to manually spin the crank handle to extend the main jack legs. This process effectively turns the scissor jack into a temporary anchor, providing the stability required for the primary system to function.

Bypassing the Cable: A Temporary Fix
For those who view the broken cable as a temporary hurdle rather than a replacement project, a direct bypass is possible. Open the jack access panel to expose the cable drum. If the cable is still attached to the drum, use a sturdy clamp or vise-grips to secure the loose end to the frame of the camper. Alternatively, if the cable has completely separated, you may need to tie off the cable to an anchor point on the jack housing to prevent it from interfering with the gear.
| Method | Best For | Level of Difficulty |
|---|---|---|
| Scissor Jack Override | Raising the camper quickly and safely | Easy |
| Cable Clamp/Bypass | Temporary use without full repair | Moderate |

Executing the Raise
With the safety protocols in place and the system stabilized, you are ready to initiate the raise. If you utilized the scissor jack method, ensure the main jack legs are clear of obstructions before turning the crank. Apply steady, firm pressure, listening for the reassuring clicks of the gears engaging. The camper should rise smoothly, albeit with a different sound than usual due to the reliance on the scissor mechanism.














![7+ pop up camper hacks [USED RV TIPS]](https://i.pinimg.com/originals/42/c6/6a/42c66a0373282a82571e8692acc20598.png)





If you opted for the cable clamp method, turning the crank will tighten the secured cable, pulling the jack sleeve upward. Monitor the alignment of the jack legs during this process; they must extend evenly to maintain balance. Do not force the mechanism if you encounter significant resistance, as this could indicate a misalignment or a secondary failure that requires professional attention.
Post-Raise Inspection and Repairs
Once the camper is fully raised and stable, take a moment to verify the integrity of the other systems. Check the levelness of the interior cabinets and ensure the doors and drawers function correctly. The sudden shift in weight distribution can sometimes cause items to shift, so securing loose gear is essential before disconnecting the scissor jack.
Regarding the broken cable itself, a temporary clamp is sufficient for a weekend trip, but a permanent repair is strongly recommended. Replacing the cable assembly is a standard procedure for experienced DIYers, involving threading the new cable through the drum and tensioning the springs. If you are uncomfortable performing this repair, schedule an appointment with a certified RV technician to ensure your pop up camper remains safe for years to come.