Open stair treads present a unique finishing challenge that requires precision and the right approach. Unlike enclosed boards, these exposed edges demand a flawless surface because any imperfection becomes immediately obvious. The primary goal is to achieve a smooth, splinter-free surface that feels comfortable underfoot and integrates seamlessly with the surrounding step.
Understanding the Wood and Its Challenges
The success of your project begins long as the first stroke of sandpaper. Open treads are often subjected to more wear and tear than their hidden counterparts, facing constant friction from shoes and feet. The wood used for these applications is typically hardwood, which can be prone to splintering if the grain is not respected. Understanding the direction of the grain is critical, as sanding against it will create rough patches that are difficult to correct later.
Initial Surface Preparation
Before you can refine the surface, you must address the raw material. Most open treads are cut from a larger board, meaning the ends often feature exposed end-grain fibers. These fibers are fragile and will crumble if hit with a standard sander too aggressively. Starting with a sharp hand plane or a low-angle scraper is the most efficient way to level these ends and remove any tear-out left by the saw.

Addressing Splintering and Tear-Out
Tear-out occurs when the wood fibers break instead of cleanly separating, leaving a fuzzy edge. To combat this, you should change your technique rather than your grit. Using a fine-grit sandpaper (around 180 to 220) with the grain can help polish away the damage left by coarser tools. If tear-out is severe, applying a thin layer of diluted wood glue to the fuzzy area and letting it dry before sanding can solidify the loose fibers for easy removal.
The Sanding Sequence for a Glass Finish
Achieving a glass-like finish on an open tread requires a systematic progression through the grits. Skipping steps is the most common mistake that leads to a less-than-professional result. You should always move from a lower grit to a higher grit, ensuring that the scratches from the previous stage are completely removed before advancing.
Step-by-Step Grit Progression
- Begin with 80-grit sandpaper to remove major imperfections and level the surface.
- Progress to 120-grit to smooth out the heavy scratches left by the 80-grit.
- Move to 180-grit to prepare the wood for staining or sealing.
- Finish with 220-grit or 320-grit to create a silky-smooth surface that invites touch.
Applying the Finish for Protection
Once the surface is perfectly smooth, the next phase is protection. Open treads are vulnerable to moisture and dirt accumulation in the edges, so the finish must be robust yet flexible. Oil-based finishes penetrate deeply to nourish the wood, while water-based finishes dry quickly and offer a high-gloss aesthetic. The key is to maintain a thin, even coat to avoid creating ridges that alter the feel of the step.

Technique for Flawless Application
Use a high-quality brush or a lint-free cloth to apply the finish, working with the grain to avoid creating new swirl marks. It is essential to wipe away any excess product before it cures, as drips on the underside of the tread will create bumps. Allow the first coat to cure completely before lightly sanding with the grain using a 320-grit paper to remove any raised grain before applying the final coat.
Maintenance and Longevity
Finishing an open tread is not a one-time event; it is the beginning of a maintenance routine. Because the wood is fully exposed, it will naturally wear and may develop a patina over time. To keep the stairs looking fresh, avoid harsh chemical cleaners that strip the protective layer. Instead, use a simple mixture of mild soap and water, followed by a buffing with a dry cloth to restore the subtle sheen of the finish.























