
Sizes: EU


---

Filament: Recreus 82A, 3Dfils 85A

Use TPU 95A first 

Nozzle: preferably 0.6mm, especially with softer filaments

---

Use the Orca Slicer or BambuStudio 3mf 

You migh also download the “gcodes.zip” folder and print the universal gcodes by uploading them on the printer SD card: send them from the printer interface.  

220x220 buildplates fit gcodes up to size EU 40, 250x250 buildplates fits all sizes

---


Bambu Studio / Orca Slicer settings:

Overlap 2 identical models, same settings except infill line direction.
A "grid" pattern is made by overlapping 2 perpendicular zigzag patterns.

Global

- layer height: 0.28mm
- line width sparse infill: 1mm
- wall loops: 0
- top shell layers: 0
- bottom shell layers: 0
- sparse infill density: 14%
- Infill pattern: zigzag (rectilinear for Orca Slicer)
- Infill anchor: 1000 (unlimited)
- Max infill anchor: 1000 (unlimited)
- Infill direction: 45° (model 1) - 135° (model 2)
- Detect narrow internal solid infill: no
- Speed sparse infill: 18 mm/s
- Enable support: no
- Reduce infill retraction: no

Cube modifier (256x256x1.1mm around height 1.5mm to make a 3 layers platform):

- Infill density: 60% (model 1) - 0% (model 2)
- Infill pattern: Rectilinear
- Infill direction: 0°

Filament:

- Retraction: 2.4mm
- Wipe: no
- Z hop: 1.2mm, Normal type
- Max volumetric speed: 4.8 mm^3/s

---

Cura settings:

- place the model diagonally (45°)
- layer height: 0.3mm
- infill line width: 0.9 (or 0.4 with 225% infill flow)
- wall line count: 0
- top layers: 0
- bottom layers: 0
- initial bottom layers: 0
- infill line distance: 6mm
- infill pattern: grid
- connect infill lines: yes
- infill line direction: []
- randomize infill start: yes
- infill overlap: 0mm
- infill speed: 18mm/s
- combing mode: off
- z hop: 1.2mm

settings modifier (300x300x1.1mm solid, placed around Z = 1.4mm, to make an internal flat top 3 layers platform to place the feet)

- infill pattern: zigzag
- infill line distance: 1mm
- infill line direction: [0,90]

---


Website: https://www.riverfamily.art/

---

LICENSE: Public Domain (https://creativecommons.org/share-your-work/public-domain/cc0/)

Also applies to gcodes, slicing process, pictures, videos and names