A persistent drip under your sink is more than an annoyance; it is a warning sign of a failing system that can lead to wasted water, damaged cabinetry, and even mold growth. Addressing this issue promptly is a fundamental home maintenance skill that saves you money and prevents small problems from escalating into structural disasters. This guide provides a detailed, step-by-step walkthrough on how to fix a pipe under the sink, covering diagnosis, preparation, and the repair itself.

Diagnosing the Source of the Leak

Before reaching for a wrench, you must identify the exact location of the leak. Water often travels along pipes and drips from a point far removed from the source, making observation critical. You need to determine if the leak is coming from the joint connected to the drain, the hot or cold water supply lines, or the pipe itself.
Visual Inspection and Testing

Start by drying the area under the sink completely with a towel. Run the faucet slowly and watch for water to emerge from specific joints. Focus on the nuts and bolts where the pipe connects to the sink, the dishwasher, or the main drain. If the leak appears to be coming from the middle of a pipe, it is likely a crack caused by age or freezing.
Gathering Your Tools and Materials

Successful repair relies heavily on having the right equipment on hand. Attempting a fix with improper tools often results in stripped nuts, damaged fittings, and a longer, more frustrating process. A well-prepared homeowner is a successful homeowner.
- Adjustable wrench or basin wrench
- Channel-lock pliers
- Screwdriver set
- Plumber's tape (Teflon tape)
- Rag or shop towels
- Bucket or basin
- Replacement washers or supply lines (if needed)
Safety and Preparation: Turning Off the Water

Never begin work under the sink with the water supply active. This poses a significant risk of flooding your home and creating a hazardous environment. Taking the time to shut off the water properly is the most important safety step in the process.
Shutting Off the Supply
Locate the two valves positioned beneath the sink, one for the hot water line and one for the cold. Turn these valves clockwise firmly until they stop. To verify the water is off, briefly turn on the faucet; if no water flows, you are safe to proceed. If the valves are stuck or missing, you may need to turn off the main water supply to the house.

Disassembling the Problem Area
With the water off and the area dry, you can now examine the specific component causing the issue. This usually involves loosening compression nuts or removing a drain assembly. Handle all components gently to avoid bending metal or cracking plastic parts.




















Accessing the Leak
Place the bucket underneath the pipes to catch any residual water. Use your wrench to loosen the nuts connecting the P-trap (the U-shaped pipe) to the tailpiece and the drain pipe. Once loose, carefully remove the P-trap and inspect it for debris, cracks, or a worn-out washer, which are the most common culprits of under-sink leaks.
Common Fixes and Replacement
Most leaks are caused by a simple failure of a small rubber component or the gradual loosening of a joint. The solution is often straightforward, requiring only a washer replacement or a tightening of the connection.
| Component | Likely Issue | Solution |
|---|---|---|
| P-trap Washer | Dried-out rubber causing gaps | Replace the washer or the entire trap assembly |
| Supply Line Fitting | Loose nut at the valve or faucet | Tighten the compression nut gently |
| Drain Pipe Seal | Cracked PVC or dry sealant | Replace the damaged pipe section |
Reassembly and Testing
Once the faulty part is addressed, reassembly must be done correctly to ensure a lasting repair. The key here is to tighten fittings snugly without overtightening, which can crack fittings or deform the pipe.
Ensuring a Proper Seal
Before threading the nuts back onto the pipes, wrap the threads with plumber's tape. This creates a watertight seal and prevents future leaks. Hand-tighten the nuts first, then use your wrench to give them a final quarter-turn. After reassembly, turn the water supply back on and run the faucet for a minute while checking the joints for any moisture.
When to Call a Professional
While the majority of under-sink issues are manageable with basic tools, some situations indicate a deeper problem that requires an expert. Persistent leaks hidden behind walls or those involving the main water supply line demand professional intervention to avoid causing significant damage.
If you turn the water back on and the leak persists, or if you discover corrosion or cracks in the pipes themselves, it is time to call a plumber. Attempting to patch a corroded pipe is a temporary fix at best; a professional can assess the integrity of the entire system and provide a permanent solution.