Create a Stylish and Functional DIY Coat Rack with Bench

Transform your entryway into a welcoming and organized space with a DIY coat rack and bench combo. This versatile piece of furniture not only provides a place to hang your coats and bags but also offers a comfortable seating area to put on or take off your shoes. Here's a step-by-step guide to create your own DIY coat rack with bench, perfect for adding a personal touch to your home.

Materials Needed
- 2x4 lumber (8ft)
- 1x4 lumber (8ft)
- 1x6 lumber (8ft)
- 2.5" pocket hole screws
- 1.25" wood screws
- Wood glue
- Stain or paint (your choice of color)
- Polyurethane (optional, for protection)
- Coat hooks (number depends on your preference)
- Sandpaper (120-220 grit)
- Tape measure
- Pencil
- Circular saw
- Drill
- Kreg Jig (for pocket holes)
- Clamps
- Safety glasses

Design and Dimensions
For this DIY project, we'll create a coat rack with a total length of 72 inches, featuring a 48-inch bench and a 24-inch coat rack. You can adjust these dimensions to fit your specific space. The bench will be 18 inches deep and 18 inches tall, providing ample seating and storage space.

Cut List
| Piece | Cut Size | Quantity |
|---|---|---|
| Legs | 2x4 @ 18" (4 pieces) | 4 |
| Bench Supports | 2x4 @ 16" (2 pieces) | 2 |
| Back Supports | 2x4 @ 24" (2 pieces) | 2 |
| Seat Slats | 1x4 @ 48" (4 pieces) | 4 |
| Back Slats | 1x6 @ 24" (4 pieces) | 4 |
| Coat Rack Supports | 2x4 @ 12" (2 pieces) | 2 |
Building the Bench

Start by cutting your lumber according to the cut list provided above. Begin constructing the bench by attaching the legs to the bench supports using pocket hole screws. Ensure the legs are flush with the top of the bench supports and the bench supports are 18 inches apart.
Next, attach the seat slats to the bench supports using wood glue and 1.25" wood screws. Space the slats evenly, leaving a small gap between each for drainage and airflow. Allow the glue to dry completely before proceeding.
Attaching the Back Supports and Slats

Attach the back supports to the legs using pocket hole screws, ensuring they are flush with the top of the legs and 18 inches apart. Then, attach the back slats to the back supports using wood glue and 1.25" wood screws. Space the slats evenly, leaving a small gap between each.
Creating the Coat Rack


















To create the coat rack, attach the coat rack supports to the back of the bench using pocket hole screws. Ensure they are flush with the top of the back slats and 24 inches apart. Once the supports are attached, you can install the coat hooks according to your preference.
Finishing Touches
Sand the entire DIY coat rack with bench using 120-220 grit sandpaper to smooth any rough edges and prepare it for staining or painting. Apply your chosen stain or paint, allowing it to dry completely between coats. For added protection, apply a layer of polyurethane (optional).
Once the finish has completely dried, your DIY coat rack with bench is ready to be placed in your entryway, providing both functionality and style. Enjoy the satisfaction of creating a custom piece of furniture that perfectly fits your space and reflects your personal taste.