An extractor fan that keeps stopping and starting is one of the most common yet maddening issues homeowners face. This repetitive cycle often indicates a specific underlying problem rather than a random glitch, and addressing it promptly is crucial for maintaining a healthy indoor environment and preventing more serious electrical failures.
Understanding the Normal Operation of Your Fan
To diagnose why your unit is malfunctioning, it helps to understand how it should work. These devices are designed to run continuously for a set period to evacuate contaminants, moisture, and odors. A consistent hum is the sound of a healthy motor, while any deviation—such as grinding, buzzing, or silence—suggests a disruption in the airflow or electrical supply.
Thermostat and Humidity Sensor Issues
Many modern units are equipped with built-in thermostats or humidity sensors that cycle the fan on and off automatically. If the sensor is faulty, dirty, or incorrectly calibrated, it may send false signals, causing the device to shut down when the air is clear or start up when it isn't needed. Checking the user manual for sensor cleaning or recalibration procedures is often the first logical step.

Overheating and Thermal Cut-Outs
Motors generate heat during operation, and they are designed with thermal protection that automatically shuts the unit down if it gets too hot. If the fan keeps stopping and starting, it could be tripping this safety feature. This usually happens when the motor is overloaded, the airflow is restricted, or the motor bearings are worn out, causing the mechanism to work harder than intended.
- Clogged Filters: A dirty filter is the number one cause of restricted airflow. When the filter is packed with dust and grease, the fan struggles to push air, leading to overheating.
- Vent Blockage: A crushed or kinked duct, or a vent hood flap stuck closed, creates backpressure that strains the motor.
Electrical Supply and Wiring Problems
Intermittent power is another frequent culprit behind this annoying behavior. A loose connection, a damaged wire, or a faulty capacitor within the motor can cause the power to fluctuate. When the electrical current drops below the required level, the motor may stop, only to restart when the connection stabilizes.
Capacitors are small components that help start the motor and maintain its running speed. When a capacitor degrades, the motor might lack the initial boost to stay running, resulting in a frustrating pattern of stopping and starting that requires a professional to verify.

The Role of the Control Board
In technologically advanced models, a printed circuit board (PCB) manages the speed settings and safety functions. If the board experiences a glitch or suffers from a bad solder joint, it might misinterpret commands or cut power erratically. Resolving this usually involves a reset, but persistent issues point to a component failure that necessitates a replacement board.
When to Call a Professional
While replacing a filter is a simple DIY task, tinkering with electrical components and motors can be dangerous and often voids warranties. If basic troubleshooting—cleaning the filter, checking the ductwork, and resetting the unit—does not resolve the issue, it is time to contact a certified technician. They can safely diagnose whether the problem lies in the wiring, the motor, or the internal circuitry.























