Embarking on a kayaking adventure often involves transporting your sit-on-top kayak over varied terrains. While some launch sites may offer easy access, many require carrying your kayak some distance. A DIY sit-on-top kayak cart can significantly simplify this process, saving you time, effort, and potential back strain. This article will guide you through creating a robust and efficient DIY sit-on-top kayak cart.
Benefits of a DIY Sit-on-Top Kayak Cart
Building your own kayak cart offers several advantages:
- Cost-effective: A homemade cart can be made for a fraction of the cost of a store-bought one.
- Customizable: You can design it to fit your specific kayak and transport needs.
- Durable: With proper materials and construction, a DIY cart can last as long as, if not longer than, a store-bought one.
- Satisfying: There's a sense of accomplishment in creating something useful with your own hands.
Materials Needed
To create a DIY sit-on-top kayak cart, you'll need the following materials:

- Two 1" x 8" x 8' pressure-treated lumber boards
- Two 3/4" x 5" x 8' pressure-treated lumber boards
- Four 3" x 3/8" x 8" lag bolts with washers
- Eight 1/4" x 2" carriage bolts with washers and nuts
- Four 1/4" x 2" eye bolts
- Four 2" x 8" casters with a 1/4" bolt hole
- Wood glue
- Screws (1-1/4" and 2-1/2")
- Drill and driver bits
- Saw (hand saw, miter saw, or circular saw)
- Tape measure
- Pencil
- Sandpaper (optional)
Step-by-Step Guide
1. Measure and Cut the Wood
Measure and cut the lumber according to the following dimensions:
| Part | Dimension |
|---|---|
| Long sides | 48" x 3" (cut 2) |
| Short sides | 12" x 3" (cut 2) |
| Supports | 12" x 1-1/2" (cut 4) |
2. Assemble the Frame
Lay out the long and short sides to form a rectangle. Apply wood glue to the ends of the long sides and attach the short sides using 1-1/4" screws. Reinforce the corners with lag bolts.
3. Attach the Supports
Position the supports inside the frame, 6" from the ends. Attach them using 1-1/4" screws and reinforce with 1/4" carriage bolts.

4. Install the Casters
Drill 1/4" holes in the supports where the casters will be mounted. Attach the casters using 1/4" bolts, washers, and nuts.
5. Add the Eye Bolts
Drill 1/4" holes in the long sides, 6" from the top. Install the eye bolts, which will be used to secure your kayak to the cart.
6. Sand and Finish (Optional)
If desired, sand any rough edges and apply a finish to protect the wood. Allow the finish to dry completely before using the cart.
Using Your DIY Sit-on-Top Kayak Cart
To use your new cart, place it under your kayak, lift the kayak onto the supports, and secure it with straps or ropes through the eye bolts. The cart is now ready to transport your kayak safely and efficiently to and from the water.
Regularly inspect your DIY sit-on-top kayak cart for any signs of wear or damage. Tighten bolts as needed and make any necessary repairs to ensure its longevity and safety.