Mastering Murray Weed Eater Head Removal: A Step-by-Step Guide
If you're a proud owner of a Murray weed eater, you know the importance of regular maintenance to keep it running smoothly. One of the most common tasks is removing the head to clean, replace, or service it. This guide will walk you through the process, ensuring you understand each step and can perform it safely.
Understanding Your Murray Weed Eater Head
Before we dive into the removal process, let's familiarize ourselves with the different types of Murray weed eater heads:
- String Trimmer Head: This is the most common type, using a line to cut weeds and grass.
- Bump Head: This type allows you to advance the line with a simple tap of your foot.
- Fixed Blade Head: This head uses blades instead of a line, providing a more precise cut.
Each type has its own removal process, but the basic steps are similar. We'll focus on the string trimmer head, as it's the most common.

Preparation: Safety First
Before you start, ensure you're wearing appropriate safety gear, including gloves, safety glasses, and ear protection if your weed eater is loud. Also, make sure your weed eater is turned off and the fuel is drained to prevent any accidents.
Murray Weed Eater Head Removal: Step-by-Step
Step 1: Disassemble the Guard
Start by removing the guard that covers the head. This usually involves unscrewing it or releasing a latch, depending on your model.
Step 2: Remove the Screw or Bolt
Once the guard is off, you'll see a screw or bolt holding the head in place. Using a wrench or an adjustable wrench, turn the bolt counterclockwise to remove it. If it's tight, you might need to use some force, but be careful not to strip the threads.

Step 3: Pull Off the Head
With the bolt removed, the head should pull off easily. If it's stuck, you might need to use a rubber mallet to gently tap it off. Be careful not to damage the head or the shaft.
Cleaning and Maintenance
With the head removed, you can clean it thoroughly. For string trimmer heads, this involves removing the old line and cleaning out any debris. For fixed blade heads, you'll need to clean and sharpen the blades.
It's also a good time to inspect the head for any signs of wear. If the head is damaged or the blades are dull, it might be time to replace it.
Reassembly: Putting It Back Together
Reassembly is simply the reverse of the removal process. Make sure the head is properly aligned and the bolt is tightened securely. Also, ensure the guard is properly reattached.
Before you start your weed eater again, make sure to refill the fuel tank and check the spark plug and air filter to ensure everything is in working order.
Troubleshooting Common Issues
| Issue | Solution |
|---|---|
| Head won't come off | Try using a rubber mallet to gently tap it off. If it's still stuck, you might need to take it to a professional. |
| Bolt is stripped | You'll need to replace the bolt. If you can't find a replacement, you might need to take it to a professional. |
| Head won't stay on | Make sure the head is properly aligned and the bolt is tightened securely. If it still won't stay on, you might need to replace the head. |
Regular head removal and maintenance can extend the life of your Murray weed eater and ensure it's always ready to tackle your yard work. If you're ever unsure about any part of the process, don't hesitate to consult the owner's manual or contact a professional.