Looking to upgrade your RAM in your 3rd Gen Dodge Ram? Removing the cab can provide better access to the truck's undercarriage, making your Job easier. But before you start, let's go over a step-by-step guide on how to remove the cab, ensuring a safe and secure process.

First, it's crucial to understand that this task requires considerable knowledge and experience with vehicle mechanics. It's always best to have a professional assist you, especially if it's your first time.

Prepare Your Workspace and Tools
Finding a suitable workspace is the first step. A well-lit, clean space with plenty of room to move around is ideal.

Gather your tools: jack stands, jack, pry bar, breaker bar, sockets (10, 12, 14, and 17 mm), 3/8 and 1/2 inch drive ratchet, extension bar, and a few flathead screwdrivers.
Secure the Vehicle

Start by blocking the rear wheels and applying the parking brake. Loosen the lug nuts on all four wheels, then jack the vehicle up and secure it with jack stands underneath the frame.
Before you proceed, ensure the vehicle is at a safe height and well-supported to prevent any accidents.
Remove the Wheels

With the vehicle secure, finish removing the lug nuts and pull the tires off. Place them somewhere safe to avoid misplacement.
Using a 3/8 inch drive ratchet and a 17 mm socket, remove theolocation sensor bolt at the front of the cylinder. Then, using a breaker bar, 14 mm socket, and an extension, remove the bolt at the back.
Disconnect Body Hardware and Wiring Harness

Use a flathead screwdriver or pry bar to gently pry the cowling from the hood. Unclip the connectors to the nose panel light and disconnect the harness.
Switch to the front of the truck. Locate and disconnect the front end harness connector to the power distribution center (PDC). Use a 10 mm socket and breaker bar to remove the bolts securing the hood to the fenders.










Remove the Dashboard
Use a 12 mm socket, breaker bar, and extension to remove the bolts securing the steering column to the frame. Carefully pull the column out of the dash, then remove the dash by lifting it out.
After removing the dash, you can access the wiring harness, airbag connection, and dashboard supports. Disconnect the harness and remove the supports. Now, the cab should lift off readily.
Separate the Cab from the Frame
Lifting the cab can be challenging due to its size, so consider recruiting a helper. Insert a pry bar between the cab and the chassis for some added leverage as you lift.
Carefully lift the cab up and off the frame. Place it on sturdy block of wood to keep it off the ground. Remember, the cab is heavy, so take all necessary safety precautions.
There you have it – a safe and secure method for removing the cab from your 3rd Gen Dodge Ram. Always remember to work safely and double-check your work. Once you're finished with your upgrades, the process of reinstalling the cab is essentially the reverse of these steps. Happy wrenching!