If you're the proud owner of a 3rd generation Dodge Ram and find yourself in need of removing your headliner, you've come to the right place. This process, while requiring some careful attention, is not rocket science. With patience, a few basic tools, and our comprehensive guide, you'll have your truck's cabin looking and feeling as good as new.

Before diving in, ensure you have the necessary tools. This includes a flathead screwdriver, a trim removal tool, a sharp knife, scissors, and a suitable upholstery needle and thread if you plan on re-upholstering. Safety first, so don't forget a pair of work gloves and safety glasses.

Understanding Your 3rd Gen Ram Headliner
Your Ram's headliner is like a sandwich, with visible fabric as the top slice, foam as the filling, and a fiberboard or plastic structure as the bottom slice. Knowing this will help you figure out how to deconstruct it.

Headliners are typically held in place with clips, screws, or both. Familiarizing yourself with their locations will make your job easier. You'll also want to know that headliners are often attached to other components, such as the sun visors or dome light housing. You'll need to detach these as well.
Preparation and Initial Removal

Start by ensuring your vehicle is parked on a level surface. Then, disconnect the vehicle's negative battery cable to prevent electrical shorts. Next, remove the dome light and any other overhead fixtures, then disconnect the wiring harness.
Begin working the headliner loose at one corner, using your trim removal tool or a flathead screwdriver. Work carefully to avoid damaging the fabric. Gradually, pull the headliner away from the cabin roof, releasing all clips and fasteners as you go.
Dealing with Attachments

Once you've freed up a significant portion of the headliner, you'll need to disconnect it from other components. Start with the sun visors, unclipping or unscrewing them, then disconnect their wiring harnesses.
If your truck has a moonroof or sliding roof, you'll also need to disconnect any associated wiring. Finally, remove the hardware holding the headliner to the roof rails, using your screwdriver or drill if necessary.
Inspecting and Repairing Your Headliner

Now that your headliner is out, take a close look at its condition. If there's damage, decide if you want to repair or replace it. Repairing involves upholstering; solid foam can be patched, and torn fabric can be patched or replaced altogether.
To replace, you'll need to buy a replacement headliner—factory originals are pricey, so consider an aftermarket one or even a universal fit. When re-installing, follow the process in reverse, ensuring all clips, screws, and hardware are fastened securely.










Common Mistakes to Avoid
One common mistake is rushing. Take your time to ensure you've released all fasteners and are careful not to damage the fabric. Another mistake is forgetting to disconnect all wiring and hardware. Double-check before proceeding.
Finally, don't assume your new headliner will perfectly fit like the old one. Measure carefully, and consider that a universal fit headliner may require some adjustments. If in doubt, consult a professional.
Removing a 3rd generation Dodge Ram headliner can seem daunting, but with patience and careful attention, you'll find it's a task well within your capabilities. So, clear some space in your garage, gather your tools, and let's get started!