Replacing an undermount sink in a granite countertop is a project that demands precision, patience, and the right set of tools. This type of installation involves cutting the sink directly into the stone, creating a seamless look that is popular in modern kitchens and bathrooms. Because granite is a hard and brittle natural stone, the process requires a different approach compared to laminate counters, focusing on preventing cracks and ensuring a perfect seal.
The Challenges of Granite Installation
The primary difficulty lies in the nature of the material. Granite cannot be cut with the same freedom as softer materials; drilling holes and making straight cuts generate significant heat and stress. If handled incorrectly, the stone can chip along the edges or even crack across the slab. Therefore, the strategy for removal focuses on minimizing direct force on the granite itself, often involving cutting the old adhesive and carefully breaking the sink free rather than prying the stone apart.
Essential Tools and Materials
Success begins with preparation. You cannot rely on household tools to handle engineered stone effectively. Having the right equipment not only makes the job easier but is also critical for protecting the integrity of your countertop.

- Putty knife or thin pry bar
- Caulking gun and utility knife
- Silicone caulk (100% clear, non-moldable)
- Plumber's putty or mounting paste
- Safety glasses and gloves
- Razor blade scraper
- New undermount sink with mounting clips
Step-by-Step Removal Process
The actual removal is a delicate dance of cutting adhesion and releasing tension. You are essentially detaching the sink from the stone without allowing the stone to break. Follow these steps methodically to ensure a smooth transition.
1. Cutting the Old Sealant
Begin by locating the bead of caulk or adhesive running between the sink rim and the granite. Using a sharp utility knife, score through the entire bead to break the seal. You must cut through to the granite surface to ensure the old adhesive releases completely. Wipe away any residual debris or dried caulk dust with a rag, ensuring the surface is clean for the new installation.
2. Releasing the Clips
Most undermount sinks utilize metal mounting clips that tighten upward against the underside of the countertop. Look for these clips in the cabinet space beneath the sink. Use a screwdriver or wrench to loosen and remove these clips entirely. Once the clips are free, the sink is only held in place by the adhesive, making it significantly easier to lift.

3. The Final Lift
With the seal cut and the clips removed, the sink should feel loose. Place a towel inside the sink to provide a grip and protect the porcelain surface. Grasp the sides and gently rock the sink back and forth. Avoid the urge to pry upward with brute force on the granite edges. Instead, focus on breaking the last bits of adhesion gently until the sink comes free.
Preparing the New Sink
Before setting the new unit, you must prepare the mounting area. Granite is porous, and oil-based plumber's putty can stain the stone if it ever oozes out. Instead, you should use a 100% clear silicone caulk around the top edge of the sink bowl. Apply a thin, consistent bead of silicone to create a waterproof barrier that will adhere securely to the granite without risking stains or discoloration.
Installation and Sealing
Position the new sink into the opening, aligning it carefully. Press the sink firmly into the silicone to ensure an even bond. Slide the mounting clips back into position under the counter and tighten them evenly to secure the fit. Finally, you must seal the seam where the sink meets the stone. Apply a fresh bead of clear silicone caulk to the underside of the sink rim, smoothing it out with a wet finger to create a waterproof, hygienic finish that prevents moisture from seeping into the cabinetry.






















