Embarking on a laminate flooring project? One of the trickiest parts is often laying the flooring around door frames. But fear not! With the right techniques and a bit of patience, you can achieve a professional-looking finish. Let's dive into the step-by-step process.

Before we start, ensure you have the right tools: a circular saw, a jigsaw, a measuring tape, a pencil, a chisel, a hammer, and safety gear, including goggles and work gloves. Also, have your laminate flooring, underlay, and expansion spacers ready.

Preparation: Measuring and Planning
Accurate measurement is key to a successful installation. Start by measuring the room, including the door frames. Remember to account for expansion gaps around the perimeter and any obstacles like radiators or pipes.

Plan your layout. It's generally best to start laying the flooring from the left-hand corner of the room, working your way across and up. This helps to hide any imperfections and ensures a balanced look.
Measuring for Door Frames

When measuring for door frames, you'll need to account for the thickness of the flooring and underlay. Measure from the bottom of the door frame to the subfloor. Subtract the total thickness of the flooring and underlay to find the height you need to cut the first row of planks.
Also, measure the width of the door frame. You'll need to cut the planks to fit this width, ensuring there's a 1/4" expansion gap between the flooring and the frame.
Preparing the Door Frame

Before you start laying the flooring, prepare the door frame. If the frame is not level, you may need to shim it up. Also, ensure the bottom of the door frame is at least 1/4" above the subfloor to allow for expansion of the laminate flooring.
If the door frame is too low, you can use a piece of underlay to raise it. Simply cut a piece of underlay to fit under the door frame, ensuring it's level and secure.
Laying the First Row

Now that you've prepared the door frame, it's time to start laying the flooring. Begin with the first row, using the measurements you took earlier to cut the planks to size.
Remember to leave a 1/4" expansion gap between the flooring and the wall using expansion spacers. This gap allows the flooring to expand and contract with changes in temperature and humidity.




















Cutting the Planks
Use a circular saw or a jigsaw to cut the planks to size. When cutting along the tongue, use a chisel to score the line first, then cut along the scored line with the saw. This helps prevent the tongue from splitting.
When cutting across the planks, use a straight edge as a guide for your saw. This will help ensure your cuts are straight and accurate.
Laying the Planks
Lay the first plank with the groove side facing the wall. Tap it gently into place using a hammer and a block of wood to protect the plank. Ensure the expansion gap is maintained.
Continue laying the planks, tapping each one into place. Use a tapping block to ensure you're tapping the planks evenly and not damaging them. Remember to stagger the joints between planks for added stability.
Laying Around Door Frames
When you reach the door frame, you'll need to cut the planks to fit around it. Use your measurements to mark the planks, then cut them using the techniques described earlier.
Lay the cut planks around the door frame, ensuring they fit snugly but not too tightly. Remember to maintain the expansion gap.
Fitting Around Obstacles
If you have obstacles like radiators or pipes, you may need to cut out notches in the planks to fit around them. Use a jigsaw to cut these notches, ensuring they're deep enough to fit around the obstacle but not so deep that the plank is weakened.
Once you've cut the notch, test fit the plank to ensure it fits around the obstacle correctly. If necessary, adjust the size of the notch until it fits perfectly.
Finishing Up
Once you've laid the flooring around the door frame, continue laying the rest of the flooring in the room. Remember to stagger the joints between planks for added stability.
When you reach the last row, you may need to cut the planks to width. Use the same techniques as before to ensure a accurate and safe cut.
Congratulations! You've successfully laid laminate flooring around door frames. Now, all that's left is to remove the expansion spacers, clean up any debris, and enjoy your new flooring. Happy DIYing!