Installing a Schluter shower base is a crucial step in creating a durable and waterproof shower.Schluter shower systems, renowned for their high-quality construction, ensure a lifetime of reliable performance. This guide walks you through the process of installing a Schluter KERDI-LINE shower base.

The first step is to prepare your shower area. Ensure the subfloor is clean, dry, and structurally sound. Mark out the shower base dimensions on the subfloor, and install any necessary shower drainage.

Preparing the Shower Area
Begin by measuring and marking the dimensions of your Schluter shower base on the subfloor. Ensure the drain opening is centered and aligns with your plumbing.

Before installing the shower base, it's essential to prime the subfloor. Apply a bonding primer to the subfloor to improve the adhesion of the mortar bed that will support your shower base.
Marking and Priming the Subfloor

Using a trowel, apply a coat of Schluter-KERDI-QUICK primer directly to the subfloor. The primer promotes bonding and prevents moisture from getting beneath the base, ensuring a durable installation.
Allow the primer to dry for at least 24 hours before proceeding to the next step. This ensures a solid base for your mortar bed and ultimately, your shower base.
Installing the Mortar Bed

Mix your thinset mortar according to the manufacturer's instructions. You'll want a medium-consistency mortar for this application. It should be thick enough to hold its shape but still spreadable.
Spread the mortar over the primed subfloor using a notched trowel. The notches help distribute the mortar evenly and create a suitable base for your shower base. Aim for a 1/4" to 3/8" thick mortar bed.
Installing the Schluter Shower Base

Position the Schluter KERDI-LINE shower base upside down on top of the wet mortar bed. Ensure the drain is aligned correctly and press down gently but firmly to embed the base into the mortar.
Wearing gloves, press down on the base, applying even pressure to create a strong bond with the mortar bed. The base should be fully embedded in the mortar, with no air pockets or dry spots.









Securing the Shower Base
Once the base is correctly positioned, install Schluter-KERDI-BAND and Schluter-KERDI-FLEX profiles around the edges of the base. These profiles prevent water from migrating behind the shower base and ensure a waterproof seal.
Apply construction adhesive between the base and the profiles to create a strong bond. Press the profiles firmly against the base, embedding them into the mortar bed as you go.
Final Touches
Allow the mortar bed to cure undisturbed for at least 24 hours. Once cured, you can install your Schluter shower wall systems, tile the shower, and complete your project.
Regular maintenance involves periodic cleaning and inspections to ensure the waterproof integrity of your Schluter shower system. Keep an eye on the grout and tile for any signs of cracking or warping, and reapply sealant as needed to maintain a watertight seal.