Creating tapered legs on a jointer is a fundamental skill that elevates furniture making from utilitarian to professional. While a jointer is primarily designed for flattening faces and squaring edges, its ability to produce a consistent taper transforms simple stock into visually elegant and structurally sound components. This process requires a methodical approach, blending precise setup with careful execution to achieve a perfectly straight taper from shoulder to foot.
The primary challenge lies in the inherent geometry of the task. A jointer's table and cutter head are designed for flat cuts, meaning the workpiece must be securely guided to travel along a specific angle relative to the cutter. This involves tricking the machine into following a path that is not aligned with its default axes. Success hinges on stable, repeatable jigs or fixtures that remove the variables of free-hand pushing, ensuring the blade contacts the same spot along the length of the leg with every pass.
Understanding the Physics of the Cut
Before setting up the machine, it is crucial to understand how the jointer interacts with the taper angle. The depth of cut is measured at the trailing edge of the workpiece, furthest from the fence. As you push the leg over the cutter, the width of the cutting area—determined by the distance between the fence and the outfeed side of the cutter head—gradually decreases. If the setup is incorrect, this can result in a shallow cut at the beginning that suddenly becomes too aggressive at the end, risking tear-out or an uneven surface.

Essential Tools and Jig Construction
A successful tapered leg operation relies heavily on a dedicated jig. The most reliable design utilizes a sacrificial fence clamped to the jointer table, oriented at the desired taper angle. This fence acts as a solid guide for the workpiece, preventing it from wandering into the blade. The jig requires a sliding component—often a precisely adjusted wedge or a tilting table setup—that allows the leg to ride flush against the fence while controlling the depth of cut across its width.
- Construct the jig from dense MDF or hardwood to ensure it remains stable and does not deflect under pressure.
- Use high-quality clamps or threaded inserts to secure the sacrificial fence firmly in place.
- Incorporate a winding stick or a straight edge to verify that the leg remains in perfect contact with the fence throughout the entire pass.
- Always prioritize dust collection on these operations, as the angled cut can create long shavings that obscure the work surface.
Step-by-Step Setup for Consistency
Establishing a repeatable setup is vital for matching legs in a pair or series. Begin by squaring the jointer bed and ensuring the cutter head is sharp and correctly aligned. Next, set the depth of cut to a minimal, manageable amount, focusing on taking thin, consistent shavings. The jig must be oriented so the high point of the taper is against the fence, allowing the low point to pass over the cutters. Perform a test cut on scrap wood, verifying the angle with a bevel gauge and inspecting the cut for smoothness and straightness before committing to the actual leg.
Execution and Safety Considerations
When making the final cut, maintain a firm and controlled push stroke, applying even pressure to keep the leg tight against the guide. Resist the urge to force the piece; let the weight of the leg and the sharpness of the cutter do the work. Feed the leg steadily, watching the contact point along the length to ensure constant fence alignment. For safety, keep your hands well clear of the cutter path, use a push stick designed for tight angles, and never remove the guard position until the setup is verified and the operation is complete.

Finishing and Verification
After the taper is cut, the leg will likely require light work with a hand plane or sander to remove any minor milling marks left by the jointer. Inspect the taper with a straight edge laid diagonally along the surface to catch any subtle deviations. Once the leg is perfectly true, the remaining faces can be flattened on the jointer, resulting in a component that is not only tapered for aesthetics but also perfectly flat and square for strong joinery. This meticulous process is the cornerstone of heirloom-quality woodworking.








![Download 1920X1200 Wallpapers for FREE [100,000+ Mobile & Desktop] - WallpaperGod.com](https://i.pinimg.com/originals/c2/03/0a/c2030aee7b7834385e7c614b24294778.jpg)














