Brother DCP T510w Not Printing? 5 Quick Fixes & Troubleshooting Guide
Troubleshooting Brother DCP-T510W Printer Not Printing Issues

If your Brother DCP-T510W printer is not printing, don't worry, you're not alone. This issue can be caused by a variety of factors, ranging from hardware problems to software glitches. In this guide, we'll walk you through some of the most common solutions to help you get your printer up and running again.

Check Basic Connections and Settings
Before diving into complex troubleshooting steps, let's ensure that the basics are covered:

- Power: Make sure your printer is properly plugged in and the power switch is turned on.
- Paper: Check if there's paper in the tray and it's properly aligned. Also, ensure that the paper type matches your printer's capabilities.
- Ink Cartridges: Confirm that the ink cartridges are properly installed and not empty. If they are, replace them with new ones.
- Driver and Software: Ensure that your printer driver is up-to-date and compatible with your operating system. You can download the latest driver from Brother's official website.
Perform a Test Print

After checking the basics, perform a test print to see if your printer responds. To do this, follow these steps:
- Open your printer's control panel.
- Press the 'Go' button.
- Select 'Test Print' using the arrow keys and press 'OK'.
If the test print is successful, the issue might be with your computer or the document you're trying to print. If not, proceed to the next steps.

Check for Paper Jams
Paper jams can cause your printer to stop working. To check for paper jams:
- Open the printer's front cover.
- Look for any jammed paper and remove it carefully.
- Close the cover and try printing again.

Reset Your Printer
Sometimes, a simple reset can solve the problem. Here's how to reset your Brother DCP-T510W:














- Turn off the printer.
- Unplug the power cord from the printer and the power outlet.
- Wait for about 30 seconds.
- Plug the power cord back in and turn on the printer.
Check for Error Messages
Your printer might be displaying an error message that could help you diagnose the problem. To check for error messages:
- Press the 'Go' button on your printer's control panel.
- Use the arrow keys to navigate to the 'Status' or 'Error' menu.
- Note down the error code or message displayed.
You can then search for this code or message online to find a specific solution for your issue.
Update Your Printer's Firmware
Outdated firmware can sometimes cause printing issues. To update your printer's firmware:
- Visit Brother's official website and download the firmware update for your printer model.
- Follow the on-screen instructions to update the firmware.
Table: Common Error Codes and Solutions
| Error Code/Message | Possible Cause | Solution |
|---|---|---|
| E01 | Paper jam | Check and remove any jammed paper |
| E02 | Ink cartridge error | Replace the ink cartridge |
| E03 | Paper size error | Ensure the paper size matches the printer's settings |
If none of the above solutions work, it might be time to contact Brother's customer support or consider professional repair services. Always remember to keep your printer clean and well-maintained to prevent future issues.